UHU GLUE

环氧胶

Epoxy

Epoksi

อีพ็อกซี่

epoxy

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

粘合剂

Sealant

sealant

Bahan Pengedap

ซีลแลนท์

 UHU Quick Set -  Crystal clear fast dual-component epoxy adhesive 

 ·  Universal, suitable for many materials

 ·  Resistant to temperatures between -40 °C and +100 °C

Suitable for fast, strong and invisible repair of many materials, such as pottery, porcelain, glass, leather, wood, stone, metal, ceramics. Both with themselves and in combination.

Not suitable for Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Recomended application at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and hardener.

The surface must be dry, clean and free of dust and grease.

Degrease parts to be bonded with denatured alcohol. Roughen smooth surfaces (sandpaper).

Mix the components by means of the supplied mixing bowl and spatula.

1 ml = approx 10cm² at a film thickness of 1 mm

Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with spatula until a mixture is obtained with a homogeneous colour. Put parts together to fit exactly without pressure. Process time approximately 5 minutes at room temperature. The functional strength is reached after 20 min, final bonding strength after 12 h (both at room temperature).

Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.

After use close well (note: always place back the cap in the same way, due to the bonding of the cap to the double syringe). For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5°C.

Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.

Store in tightly closed packaging in a dry, cool and frost-free place.

UHU Quick Set - Crystal clear fast dual-component epoxy adhesive PROPERTIES · Fast · Crystal clear · Super-strong · Universal, suitable for many materials · Resistant to temperatures between -40 °C and +100 °C · Filling · Water resistant · Chemical resistant · Paintable APPLICATIONSUITABLE FOR:Suitable for fast, strong and invisible repair of many materials, such as pottery, porcelain, glass, leather, wood, stone, metal, ceramics. Both with themselves and in combination.NOT SUITABLE FOR:Not suitable for Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber. HANDLINGBEFORE USE:Working conditionsRecomended application at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and hardener.Personal safetyPreferably wear gloves.Surface requirementsThe surface must be dry, clean and free of dust and grease.Preliminary surface treatmentDegrease parts to be bonded with denatured alcohol. Roughen smooth surfaces (sandpaper).ToolsMix the components by means of the supplied mixing bowl and spatula.Mixture ratio1:1Coverage1 ml = approx 10cm² at a film thickness of 1 mmDURING USE:Directions for usePress out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with spatula until a mixture is obtained with a homogeneous colour. Put parts together to fit exactly without pressure. Process time approximately 5 minutes at room temperature. The functional strength is reached after 20 min, final bonding strength after 12 h (both at room temperature).AdviceSome types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.Points of attentionAfter use close well (note: always place back the cap in the same way, due to the bonding of the cap to the double syringe). For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5°C.AFTER USE:Stains/residueRemove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.Storage conditionsStore in tightly closed packaging in a dry, cool and frost-free place. Comes in box of 10

&nbsp;UHU Quick Set - Crystal clear fast dual-component epoxy adhesive&nbsp;
PROPERTIES
&nbsp;· Fast
&nbsp;· Crystal clear
&nbsp;· Super-strong
&nbsp;· Universal, suitable for many materials
&nbsp;· Resistant to temperatures between -40 °C and +100 °C
&nbsp;· Filling
&nbsp;· Water resistant
&nbsp;· Chemical resistant
&nbsp;· Paintable
&nbsp;
APPLICATION
SUITABLE FOR:
Suitable for fast, strong and invisible repair of many materials, such as pottery, porcelain, glass, leather, wood, stone, metal, ceramics. Both with themselves and in combination.
NOT SUITABLE FOR:
Not suitable for Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

HANDLING
BEFORE USE:
Working conditions
Recomended application at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and hardener.
Personal safety
Preferably wear gloves.
Surface requirements
The surface must be dry, clean and free of dust and grease.
Preliminary surface treatment
Degrease parts to be bonded with denatured alcohol. Roughen smooth surfaces (sandpaper).
Tools
Mix the components by means of the supplied mixing bowl and spatula.
Mixture ratio
1:1
Coverage
1 ml = approx 10cm² at a film thickness of 1 mm
DURING USE:
Directions for use
Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with spatula until a mixture is obtained with a homogeneous colour. Put parts together to fit exactly without pressure. Process time approximately 5 minutes at room temperature. The functional strength is reached after 20 min, final bonding strength after 12 h (both at room temperature).
Advice
Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.
Points of attention
After use close well (note: always place back the cap in the same way, due to the bonding of the cap to the double syringe). For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5°C.
AFTER USE:
Stains/residue
Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.
Storage conditions
Store in tightly closed packaging in a dry, cool and frost-free place.

Comes in box of 10

Merek:	UHU GLUE
Model:	UHU Epoxy

Unit	Diskon	Harga Satuan
1	-	Rp 1.030.506
2 ~ 3	2% OFF	Rp 1.007.835
4 ~ 5	4% OFF	Rp 987.225
6 ~ 7	6% OFF	Rp 964.554
8 ~ 9	10% OFF	Rp 932.608
10++	13% OFF	Rp 896.541