AF Hydro

Pipe Coupling

Kopling Pipa

Gandingan Paip

ข้อต่อท่อ

pipe-coupling

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

管件

Pipe Fittings

pipe fittings

Perlengkapan Pipa

Kelengkapan Paip

อุปกรณ์ท่อ

pipe-fittings

 Full coupling (pipe coupling) extends pipeline and connects small bore pipes of different and same sizes. It is also known as pipe coupling. It has 2 female NPT ends. 

 Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  

The threaded ends ease installation and provide a tighter connection. Welding is not required.

Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.

Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.

 To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. 

Remove any excess tape and tighten the joints. 

Do avoid excessive screwing as it may damage the pipe or the fitting. 

Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.  

<h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled"> Full coupling (pipe coupling) extends pipeline and connects small bore pipes of different and same sizes. It is also known as pipe coupling. It has 2 female NPT ends. </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled"> Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li> To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.  </li></ol>

<h3><strong>About This Product</strong></h3>
<p>&nbsp;Full coupling (pipe coupling) extends pipeline and connects small bore pipes of different and same sizes. It is also known as pipe coupling. It has 2 female NPT ends.&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>&nbsp;Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>&nbsp;To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.&nbsp;&nbsp;</li>
</ol>


Stainless Steel SS316 Full Coupling Class #150 Pipe Fitting

stainless steel ss316 full coupling class #150 pipe fitting kelas kopling penuh pemasangan pipa af hydro keluli tahan karat gandingan paip 不锈钢 全耦合类 管件 af水电

Merek:	AF Hydro
Model:	#150 Series SS316 Full Coupling

Tentang Produk Ini

Lebih Lanjut Tentang #150 Fitting

Bagaimana Menghubungkan Fitting #150?