SCHNEIDER ELECTRIC

Current Transformers

current-transformers

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

自动化 & 控制

Automation & Controls

automation & controls

Otomatisasi & Kontrol

Automasi & Kawalan

ระบบอัตโนมัติและการควบคุม

automation-controls

Schneider Electric 50437 Closed Toroid a Type, Vigipact, Vigilohm, TA30, Inner Diameter 30mm, Rated Current 65A 

This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 65A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 30 millimeters and the weight is 0.120kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 15 millimeters. The maximum cross section per phase (R, S, T, N) is 25mm² for a copper conductor.

Product or Component Type: Earth leakage current sensor

Device Application: Equipment monitoring and control

Current Sensor Type: A type closed toroid

[Icw] Rated Short-time Withstand Current: 85 kA for 0.5 s

Residual Short-circuit Withstand Current: 85 kA / 0.5 s

[Uimp] Rated Impulse Withstand Voltage: 12 kV

Connections - Terminals: Screw connection 0.22 mm²

Cable Outer Diameter: 15 mm (maximum), 25 mm²

IP Degree of Protection: Connectors: IP20, IP30

Exposure to damp heat not in service: 28 cycles (25...55 °C, RH 95 %)

Exposure to damp heat in service: category C2: 48 hours

Ambient Air Temperature for Operation: -35…70 °C

Ambient Air Temperature for Storage: -55…85 °C

<h3 class="md-block-header-three">Schneider Electric 50437 Closed Toroid a Type, Vigipact, Vigilohm, TA30, Inner Diameter 30mm, Rated Current 65A </h3>This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 65A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 30 millimeters and the weight is 0.120kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 15 millimeters. The maximum cross section per phase (R, S, T, N) is 25mm² for a copper conductor. Specifications: <ul class="md-block-unordered-list-item"><li>Range: VigiPacT</li><li>Device Short Name: TA30</li><li>Product or Component Type: Earth leakage current sensor</li><li>Device Application: Equipment monitoring and control</li><li>Range Compatibility:</li><ul class="md-block-unordered-list-item"><li>VigiPacT RH10M, RH10P</li><li>VigiPacT RH21M, RH21P</li><li>VigiPacT RH68M, RH86M, RH86P</li><li>VigiPacT RH99M, RH99P</li><li>VigiPacT RH197M, RH197P</li><li>VigiPacT RHU, RHUs</li><li>VigiPacT RMH</li></ul><li>Current Sensor Type: A type closed toroid</li><li>[Ie] Rated Operational Current: 65 A</li><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Transformer Ratio: 1/1000</li><li>Network Type: AC/DC</li><li>Network Frequency: 45...440 Hz</li><li>[Icw] Rated Short-time Withstand Current: 85 kA for 0.5 s</li><li>Residual Short-circuit Withstand Current: 85 kA / 0.5 s</li><li>[Ui] Rated Insulation Voltage: 1000 V</li><li>Overvoltage Category: IV</li><li>[Uimp] Rated Impulse Withstand Voltage: 12 kV</li></ul><li>Mounting Mode:</li><ul class="md-block-unordered-list-item"><li>Fixed (plain backplate)</li><li>Fixed (profiled sheet metal)</li><li>Fixed (slotted backplate)</li><li>Clip-on (DIN rail)</li><li>Clip-on (Vigirex relay)</li></ul><li>Calorific Value: 0.98 MJ</li><li>Connections - Terminals: Screw connection 0.22 mm²</li><li>Dimensions:</li><ul class="md-block-unordered-list-item"><li>Height: 82 mm</li><li>Width: 60 mm</li><li>Depth: 29 mm</li><li>Diameter: 30 mm (inner)</li><li>Cable Outer Diameter: 15 mm (maximum), 25 mm²</li></ul><li>Net Weight: 0.12 kg</li><li>Environment:</li><ul class="md-block-unordered-list-item"><li>IP Degree of Protection: Connectors: IP20, IP30</li><li>Environmental Characteristic:</li><ul class="md-block-unordered-list-item"><li>Exposure to damp heat not in service: 28 cycles (25...55 °C, RH 95 %)</li><li>Salt mist: Kb/2</li><li>Exposure to damp heat in service: category C2: 48 hours</li></ul><li>Pollution Degree: Level 3</li><li>Ambient Air Temperature for Operation: -35…70 °C</li><li>Ambient Air Temperature for Storage: -55…85 °C</li></ul><li>Standards: IEC 60947-2</li><li>Product Certifications: CE</li></ul>

<h3>Schneider Electric 50437 Closed Toroid a Type, Vigipact, Vigilohm, TA30, Inner Diameter 30mm, Rated Current 65A&nbsp;</h3>
This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 65A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 30 millimeters and the weight is 0.120kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 15 millimeters. The maximum cross section per phase (R, S, T, N) is 25mm² for a copper conductor.
&nbsp;Specifications:&nbsp;
<ul>
<li>Range: VigiPacT</li>
<li>Device Short Name: TA30</li>
<li>Product or Component Type: Earth leakage current sensor</li>
<li>Device Application: Equipment monitoring and control</li>
<li>Range Compatibility:</li>
<ul>
<li>VigiPacT RH10M, RH10P</li>
<li>VigiPacT RH21M, RH21P</li>
<li>VigiPacT RH68M, RH86M, RH86P</li>
<li>VigiPacT RH99M, RH99P</li>
<li>VigiPacT RH197M, RH197P</li>
<li>VigiPacT RHU, RHUs</li>
<li>VigiPacT RMH</li>
</ul>
<li>Current Sensor Type: A type closed toroid</li>
<li>[Ie] Rated Operational Current: 65 A</li>
<li>Complementary:</li>
<ul>
<li>Transformer Ratio: 1/1000</li>
<li>Network Type: AC/DC</li>
<li>Network Frequency: 45...440 Hz</li>
<li>[Icw] Rated Short-time Withstand Current: 85 kA for 0.5 s</li>
<li>Residual Short-circuit Withstand Current: 85 kA / 0.5 s</li>
<li>[Ui] Rated Insulation Voltage: 1000 V</li>
<li>Overvoltage Category: IV</li>
<li>[Uimp] Rated Impulse Withstand Voltage: 12 kV</li>
</ul>
<li>Mounting Mode:</li>
<ul>
<li>Fixed (plain backplate)</li>
<li>Fixed (profiled sheet metal)</li>
<li>Fixed (slotted backplate)</li>
<li>Clip-on (DIN rail)</li>
<li>Clip-on (Vigirex relay)</li>
</ul>
<li>Calorific Value: 0.98 MJ</li>
<li>Connections - Terminals: Screw connection 0.22 mm²</li>
<li>Dimensions:</li>
<ul>
<li>Height: 82 mm</li>
<li>Width: 60 mm</li>
<li>Depth: 29 mm</li>
<li>Diameter: 30 mm (inner)</li>
<li>Cable Outer Diameter: 15 mm (maximum), 25 mm²</li>
</ul>
<li>Net Weight: 0.12 kg</li>
<li>Environment:</li>
<ul>
<li>IP Degree of Protection: Connectors: IP20, IP30</li>
<li>Environmental Characteristic:</li>
<ul>
<li>Exposure to damp heat not in service: 28 cycles (25...55 °C, RH 95 %)</li>
<li>Salt mist: Kb/2</li>
<li>Exposure to damp heat in service: category C2: 48 hours</li>
</ul>
<li>Pollution Degree: Level 3</li>
<li>Ambient Air Temperature for Operation: -35…70 °C</li>
<li>Ambient Air Temperature for Storage: -55…85 °C</li>
</ul>
<li>Standards: IEC 60947-2</li>
<li>Product Certifications: CE</li>
</ul>

Product Datasheet

User guide

Instruction sheet

Catalogue

Environmental disclosure

Schneider Electric 50437 Closed Toroid a Type, Vigipact, Vigilohm, TA30, Inner Diameter 30mm, Rated Current 65A

schneider electric 50437 closed toroid type, vigipact, vigilohm, ta30, inner diameter 30mm, rated current 65a tipe tertutup, dalam arus terukur transformers jenis berkadar electric/施耐德电气 闭合环形线圈 型，vigipact，vigilohm，ta30，内径 30 毫米，额定电流 施耐德电气

Schneider Electric 50437 Tipe Toroid Tertutup, Vigipact, Vigilohm, TA30, Diameter Dalam 30mm, Arus Terukur 65A