环氧胶

Epoxy

Epoksi

อีพ็อกซี่

epoxy

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

粘合剂

Sealant

sealant

Bahan Pengedap

ซีลแลนท์

Ppg SigmaCover 456 Epoxy Finish, All Colours

Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions.
 Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).

General-purpose epoxy buildcoat or finish for protective coating systems
 

Suitable for steel and concrete in atmospheric land or marine conditions
 

Easy application by airless spray and brush
 

Tolerant of high humidity (up to 95%) during application and curing without loss of quality
 

Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings
 

Can be recoated with two-component and conventional coatings, even after long weathering periods
 

Resistant to water and mild chemical splash
 

Tough and flexible for long-term durability
 

Colours: Standard and custom colours available
 

Epoxy coatings chalk and fade when exposed to sunlight
 

Substrate temperature during application/curing:
 

Minimum: -10°C (14°F), surface must be dry and free of ice
 

Should be at least 3°C (5°F) above dew point
 

In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment)
 

Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention
 

Optimal curing and full product performance achieved only when minimum substrate temperature is reached

<h3 class="md-block-header-three">Ppg SigmaCover 456 Epoxy Finish, All Colours</h3>Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).<h4 class="md-block-header-four">Product Features &amp; Benefits</h4><ul class="md-block-unordered-list-item"><li>General-purpose epoxy buildcoat or finish for protective coating systems </li><li>Suitable for steel and concrete in atmospheric land or marine conditions </li><li>Easy application by airless spray and brush </li><li>Cures down to -10°C (14°F) </li><li>Tolerant of high humidity (up to 95%) during application and curing without loss of quality </li><li>Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings </li><li>Can be recoated with two-component and conventional coatings, even after long weathering periods </li><li>Resistant to water and mild chemical splash </li><li>Excellent corrosion resistance </li><li>Tough and flexible for long-term durability </li><li>Colours: Standard and custom colours available </li><li>Gloss level: Semi-gloss </li></ul><h4 class="md-block-header-four">Method of Application</h4><ul class="md-block-unordered-list-item"><li>Air spray </li><li>Airless spray </li><li>Brush/Roller </li></ul><h4 class="md-block-header-four">Notes</h4><ul class="md-block-unordered-list-item"><li>Epoxy coatings chalk and fade when exposed to sunlight </li><li>Substrate temperature during application/curing: </li><ul class="md-block-unordered-list-item"><li>Minimum: -10°C (14°F), surface must be dry and free of ice </li><li>Should be at least 3°C (5°F) above dew point </li><li>In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment) </li></ul><li>Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention </li><li>Optimal curing and full product performance achieved only when minimum substrate temperature is reached</li></ul>

<h3>Ppg SigmaCover 456 Epoxy Finish, All Colours</h3>
Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. 
 Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).
<h4>Product Features &amp; Benefits</h4>
<ul>
<li>General-purpose epoxy buildcoat or finish for protective coating systems 
&nbsp;</li>
<li>Suitable for steel and concrete in atmospheric land or marine conditions 
&nbsp;</li>
<li>Easy application by airless spray and brush 
&nbsp;</li>
<li>Cures down to -10°C (14°F) 
&nbsp;</li>
<li>Tolerant of high humidity (up to 95%) during application and curing without loss of quality 
&nbsp;</li>
<li>Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings 
&nbsp;</li>
<li>Can be recoated with two-component and conventional coatings, even after long weathering periods 
&nbsp;</li>
<li>Resistant to water and mild chemical splash 
&nbsp;</li>
<li>Excellent corrosion resistance 
&nbsp;</li>
<li>Tough and flexible for long-term durability 
&nbsp;</li>
<li>Colours: Standard and custom colours available 
&nbsp;</li>
<li>Gloss level: Semi-gloss 
&nbsp;</li>
</ul>
<h4>Method of Application</h4>
<ul>
<li>Air spray 
&nbsp;</li>
<li>Airless spray 
&nbsp;</li>
<li>Brush/Roller 
&nbsp;</li>
</ul>
<h4>Notes</h4>
<ul>
<li>Epoxy coatings chalk and fade when exposed to sunlight 
&nbsp;</li>
<li>Substrate temperature during application/curing: 
&nbsp;</li>
<ul>
<li>Minimum: -10°C (14°F), surface must be dry and free of ice 
&nbsp;</li>
<li>Should be at least 3°C (5°F) above dew point 
&nbsp;</li>
<li>In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment) 
&nbsp;</li>
</ul>
<li>Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention 
&nbsp;</li>
<li>Optimal curing and full product performance achieved only when minimum substrate temperature is reached</li>
</ul>

Merek:	PPG
Model:	SigmaCover 456

PPG SigmaCover 456 Epoxy Finish, Semua Warna

Fitur & Manfaat Produk

Cara Aplikasi

Catatan