环氧胶

Epoxy

Epoksi

อีพ็อกซี่

epoxy

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

粘合剂

Sealant

sealant

Bahan Pengedap

ซีลแลนท์

Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (Pink, Grey) Pack Size 20 Litres

PPG SigmaTherm 230 is a two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°C.

SigmaTherm 230 is a high performance, heat resistant product that provides protection to a variety of metal substrates. PPG SigmaTherm 230 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.

Blast clean steel to ISO-Sa2.5 with a blasting profile of 40 - 70 microns. The substrate must be perfectly dry before and during application. Degrease stainless steel with solvents and sweep blast. The temperature of the mixed base and hardener should be above 15°C otherwise extra thinner may be required. Adding to much thinner results in reduced sag resistance. Allow sufficient induction time as per data sheet.

SigmaTherm 230 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 230 should ideally be used internally to offer heat resistance to appliances of up to 230°C.

<h3 class="md-block-header-three">Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (Pink, Grey) Pack Size 20 Litres</h3><ul class="md-block-unordered-list-item"><li>Product Details</li></ul>PPG SigmaTherm 230 is a two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°C.<ul class="md-block-unordered-list-item"><li>Best Uses</li></ul>SigmaTherm 230 is a high performance, heat resistant product that provides protection to a variety of metal substrates. PPG SigmaTherm 230 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.<ul class="md-block-unordered-list-item"><li>Application</li></ul>Blast clean steel to ISO-Sa2.5 with a blasting profile of 40 - 70 microns. The substrate must be perfectly dry before and during application. Degrease stainless steel with solvents and sweep blast. The temperature of the mixed base and hardener should be above 15°C otherwise extra thinner may be required. Adding to much thinner results in reduced sag resistance. Allow sufficient induction time as per data sheet.<ul class="md-block-unordered-list-item"><li>Surface and Environment</li></ul>SigmaTherm 230 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 230 should ideally be used internally to offer heat resistance to appliances of up to 230°C.

<h3>Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (Pink, Grey) Pack Size 20 Litres</h3>
<ul>
<li>Product Details</li>
</ul>
PPG SigmaTherm 230 is a two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°C.
<ul>
<li>Best Uses</li>
</ul>
SigmaTherm 230 is a high performance, heat resistant product that provides protection to a variety of metal substrates. PPG SigmaTherm 230 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.
<ul>
<li>Application</li>
</ul>
Blast clean steel to ISO-Sa2.5 with a blasting profile of 40 - 70 microns. The substrate must be perfectly dry before and during application. Degrease stainless steel with solvents and sweep blast. The temperature of the mixed base and hardener should be above 15°C otherwise extra thinner may be required. Adding to much thinner results in reduced sag resistance. Allow sufficient induction time as per data sheet.
<ul>
<li>Surface and Environment</li>
</ul>
SigmaTherm 230 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 230 should ideally be used internally to offer heat resistance to appliances of up to 230°C.

Product Datasheet

Safety Datasheet

Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (pink, Grey) Pack Size 20 Litres

ppg 230 sigmatherm epoxy phenolic dry temp 200 300degc (pink, grey) pack size 20 litres hingga suhu kering atau 300 derajat celcius (merah muda, abu-abu) ukuran kemasan liter epoksi sehingga jambu, kelabu) saiz pek 环氧酚醛树脂，干燥温度高达 摄氏度（粉色、灰色）包装规格 环氧胶

Merek:	PPG
Model:	230

Ppg 230 Sigmatherm Epoxy Phenolic hingga Suhu Kering 200 atau 300 derajat Celcius (Merah Muda, Abu-abu) Ukuran Kemasan 20 Liter