紧急洗眼和安全淋浴站

Emergency Eyewash and Safety Shower Station

Stasiun Pencuci Mata Darurat Dan Pancuran Keselamatan

Stesen Pancuran Keselamatan & Pencuci Mata Kecemasan

อ่างล้างตาฉุกเฉินและฝักบัวนิรภัย

emergency-eyewash-and-safety-shower-station

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

工作场所安全

Workplace Safety

workplace safety

Keamanan Tempat Kerja

Keselamatan Tempat Kerja

ความปลอดภัยในสถานที่ทำงาน

workplace-safety

Epoxy Coating Emergency Shower and Eyewash Station
 
Emergency Shower and Eyewashes is an emergency device that temporarily relieves any toxic or harmful substances, such as corrosive chemical liquids, from incurring further damage to a physical body in case the hazardous substance spills to the body, face or eyewash station​ of workers, and makes time for professional medical care. The first 10 to 15 seconds after exposure to a hazardous substance, especially a corrosive substance, are critical.

Emergency showers and eyewash stations provide on-the-spot decontamination. They allow workers to flush away hazardous substances that can cause injury.

Accidental chemical exposures can still occur even with good engineering controls and safety precautions. As a result, it is essential to look beyond the use of goggles, face shields, and procedures for using personal protective equipment. Emergency showers and eyewash station​ are a necessary backup to minimize the effects of accident exposure to chemicals.

Eyewash Station  can also be used effectively in extinguishing clothing fires or for flushing contaminants off clothing.

COMPLIANT for Emergency Shower and Eyewashes

ANSI Z358.1-2014 does not specify how long the affected body part should be rinsed. It does specify that the equipment installed according to the standard be capable of providing flushing liquid for a minimum of 15 minutes.

Eyewash series comply with standard of ANSI Z358.1-2014, and requirements of OSHA.

5-minutes for non-irritants or mild irritants,

15-20 minutes for moderate to severe irritants and chemicals that cause acute toxicity if absorbed through the skin,

30 minutes for most corrosives, and 60 minutes for strong alkalis.

Standard type equipped with shower and eyewash.

Provide full-body relief from contamination quickly and effectively.

TYPE: Combination | Stainless Steel 304 with Epoxy Coating
STANDARD: ANSI Z358.1-2014, EN15154, AS 4775-2007, OSHA 29
EYEWASH FLOW RATE: ≥11.4L/min
SHOWER FLOW RATE: ≥75.7L/min
INLET /OUTLET SIZE: 1-1/4’’
MINIMUM AMBIENT TEMPERATURE: 5°C/41°F
MAXIMUM AMBIENT TEMPERATURE: 35°C/95°F

Epoxy Coating Emergency Shower and Eyewash Station   Emergency Shower and Eyewashes is an emergency device that temporarily relieves any toxic or harmful substances, such as corrosive chemical liquids, from incurring further damage to a physical body in case the hazardous substance spills to the body, face or eyewash station​ of workers, and makes time for professional medical care. The first 10 to 15 seconds after exposure to a hazardous substance, especially a corrosive substance, are critical.Emergency showers and eyewash stations provide on-the-spot decontamination. They allow workers to flush away hazardous substances that can cause injury.Accidental chemical exposures can still occur even with good engineering controls and safety precautions. As a result, it is essential to look beyond the use of goggles, face shields, and procedures for using personal protective equipment. Emergency showers and eyewash station​ are a necessary backup to minimize the effects of accident exposure to chemicals.Eyewash Station  can also be used effectively in extinguishing clothing fires or for flushing contaminants off clothing.COMPLIANT for Emergency Shower and EyewashesANSI Z358.1-2014 does not specify how long the affected body part should be rinsed. It does specify that the equipment installed according to the standard be capable of providing flushing liquid for a minimum of 15 minutes.Eyewash series comply with standard of ANSI Z358.1-2014, and requirements of OSHA.For example<ul class="md-block-unordered-list-item"><li>5-minutes for non-irritants or mild irritants,</li><li>15-20 minutes for moderate to severe irritants and chemicals that cause acute toxicity if absorbed through the skin,</li><li>30 minutes for most corrosives, and 60 minutes for strong alkalis.</li><li>Standard type equipped with shower and eyewash.</li><li>Provide full-body relief from contamination quickly and effectively.</li><li>Comply with ANSI Z358.1-2014.</li></ul>Indoor | Outdoor With Foot TreadleTYPE: Combination | Stainless Steel 304 with Epoxy Coating STANDARD: ANSI Z358.1-2014, EN15154, AS 4775-2007, OSHA 29 EYEWASH FLOW RATE: ≥11.4L/min SHOWER FLOW RATE: ≥75.7L/min INLET /OUTLET SIZE: 1-1/4’’ MINIMUM AMBIENT TEMPERATURE: 5°C/41°F MAXIMUM AMBIENT TEMPERATURE: 35°C/95°FSKU: S350

Epoxy Coating Emergency Shower and Eyewash Station 
  
Emergency Shower and Eyewashes is an emergency device that temporarily relieves any toxic or harmful substances, such as corrosive chemical liquids, from incurring further damage to a physical body in case the hazardous substance spills to the body, face or eyewash station​ of workers, and makes time for professional medical care. The first 10 to 15 seconds after exposure to a hazardous substance, especially a corrosive substance, are critical.
Emergency showers and eyewash stations provide on-the-spot decontamination. They allow workers to flush away hazardous substances that can cause injury.
Accidental chemical exposures can still occur even with good engineering controls and safety precautions. As a result, it is essential to look beyond the use of goggles, face shields, and procedures for using personal protective equipment. Emergency showers and eyewash station​ are a necessary backup to minimize the effects of accident exposure to chemicals.
Eyewash Station  can also be used effectively in extinguishing clothing fires or for flushing contaminants off clothing.
COMPLIANT for Emergency Shower and Eyewashes
ANSI Z358.1-2014 does not specify how long the affected body part should be rinsed. It does specify that the equipment installed according to the standard be capable of providing flushing liquid for a minimum of 15 minutes.
Eyewash series comply with standard of ANSI Z358.1-2014, and requirements of OSHA.
For example
<ul>
<li>5-minutes for non-irritants or mild irritants,</li>
<li>15-20 minutes for moderate to severe irritants and chemicals that cause acute toxicity if absorbed through the skin,</li>
<li>30 minutes for most corrosives, and 60 minutes for strong alkalis.</li>
<li>Standard type equipped with shower and eyewash.</li>
<li>Provide full-body relief from contamination quickly and effectively.</li>
<li>Comply with ANSI Z358.1-2014.</li>
</ul>
Indoor | Outdoor With Foot Treadle
TYPE: Combination | Stainless Steel 304 with Epoxy Coating 
STANDARD: ANSI Z358.1-2014, EN15154, AS 4775-2007, OSHA 29 
EYEWASH FLOW RATE: ≥11.4L/min 
SHOWER FLOW RATE: ≥75.7L/min 
INLET /OUTLET SIZE: 1-1/4’’ 
MINIMUM AMBIENT TEMPERATURE: 5°C/41°F 
MAXIMUM AMBIENT TEMPERATURE: 35°C/95°F
SKU: S350

Oss Epoxy Coating Emergency Shower and Eyewash Station | S350

oss epoxy coating emergency shower eyewash station s350 pancuran darurat dan tempat pencuci mata dengan pelapis epoksi safety stasiun keselamatan kecemasan stesen cuci oss/开源软件 环氧涂层紧急淋浴和洗眼站 紧急洗眼和安全淋浴站 开源软件

Merek:	OSS
Model:	S350