Moxa

网络产品

Networking Products

Produk Jaringan

Produk Rangkaian

ผลิตภัณฑ์เครือข่าย

networking-products

3C数码 & 电子设备

IT & Electronics

it & electronics

IT & Elektronik

ไอทีและอิเล็กทรอนิกส์

it-electronics

数据 & 网络

Data & Network 

data & network 

Jaringan data

Data & Rangkaian

ข้อมูลและเครือข่าย

data-network

Moxa Industrial RS-232/422/485 to Fiber Converters ICF-1150I-M-ST-T

Manufacturer Part Number
ICF-1150I-M-ST-T

Product Description
Industrial RS-232/422/485 to multi-mode fibre converter, ST connector, 2 kV isolation, -40 to 85°C operating temperature

3-way communication: RS-232, RS-422/485, and fibre

Rotary switch to change the pull high/low resistor value

Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode

-40 to 85°C wide-temperature range models available

C1D2, ATEX, and IECEx certified for harsh industrial environments

The ICF-1150 serial-to-fibre converters transfer RS-232/RS-422/RS-485 signals to optical fibre ports to enhance the transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fibre ports. These products not only support single-mode and multi-mode fibre for different transmission distances, but models with isolation protection are also available to enhance noise immunity. The ICF-1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.

Three-Way Communication
The ICF-1150 Series supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fibre port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fibre port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.

Rotary Switch for Setting the Pull High/Low Resistor
The RS-485 interface supports multi-drop or daisy-chain connections, which system engineers will use to connect serial devices such as meters, RTUs, and readers, together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN rail.

Moxa Industrial RS-232/422/485 to Fiber Converters ICF-1150I-M-ST-TManufacturer Moxa Manufacturer Part Number ICF-1150I-M-ST-TProduct Description Industrial RS-232/422/485 to multi-mode fibre converter, ST connector, 2 kV isolation, -40 to 85°C operating temperatureFeatures and Benefits <ul class="md-block-unordered-list-item"><li>3-way communication: RS-232, RS-422/485, and fibre</li><li>Rotary switch to change the pull high/low resistor value</li><li>Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode</li><li>-40 to 85°C wide-temperature range models available</li><li>C1D2, ATEX, and IECEx certified for harsh industrial environments</li></ul>IntroductionThe ICF-1150 serial-to-fibre converters transfer RS-232/RS-422/RS-485 signals to optical fibre ports to enhance the transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fibre ports. These products not only support single-mode and multi-mode fibre for different transmission distances, but models with isolation protection are also available to enhance noise immunity. The ICF-1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.Three-Way Communication The ICF-1150 Series supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fibre port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fibre port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.Rotary Switch for Setting the Pull High/Low Resistor The RS-485 interface supports multi-drop or daisy-chain connections, which system engineers will use to connect serial devices such as meters, RTUs, and readers, together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN rail.

Moxa Industrial RS-232/422/485 to Fiber Converters ICF-1150I-M-ST-T
<ins>Manufacturer 
</ins>Moxa&nbsp;
<ins>Manufacturer Part Number 
</ins>ICF-1150I-M-ST-T
<ins>Product Description 
</ins>Industrial RS-232/422/485 to multi-mode fibre converter, ST connector, 2 kV isolation, -40 to 85°C operating temperature
<ins>Features and Benefits </ins>
<ul>
<li>3-way communication: RS-232, RS-422/485, and fibre</li>
<li>Rotary switch to change the pull high/low resistor value</li>
<li>Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode</li>
<li>-40 to 85°C wide-temperature range models available</li>
<li>C1D2, ATEX, and IECEx certified for harsh industrial environments</li>
</ul>
<ins>Introduction</ins>
The ICF-1150 serial-to-fibre converters transfer RS-232/RS-422/RS-485 signals to optical fibre ports to enhance the transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fibre ports. These products not only support single-mode and multi-mode fibre for different transmission distances, but models with isolation protection are also available to enhance noise immunity. The ICF-1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.
<ins>Three-Way Communication 
</ins>The ICF-1150 Series supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fibre port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fibre port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.
<ins>Rotary Switch for Setting the Pull High/Low Resistor 
</ins>The RS-485 interface supports multi-drop or daisy-chain connections, which system engineers will use to connect serial devices such as meters, RTUs, and readers, together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN rail.

Data Sheet

Moxa Industrial Fiber Converters ICF-1150I-M-ST-T

moxa industrial fiber converters icf-1150i-m-st-t pengonversi serat industri networking products produk jaringan penukar gentian perindustrian rangkaian moxa/艾草 工业光纤转换器 网络产品 艾草

Merek:	Moxa
Model:	ICF-1150I-M-ST-T