Igus

3D打印灯丝

3D Printing Filament 

Filamen Pencetakan 3d

Filamen percetakan 3d

เส้นใยการพิมพ์ 3 มิติ

3-d-printing-filament

机械设备

Machinery

machinery

Mesin

Jentera

เครื่องจักร

Other Machines

other machines

เครื่องจักรอื่นๆ

other-machines

Components made from the 3D printing material iglidur i180-PF can be used universally for all types of wear parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds. The filament is easy to process on encased 3D printers and is somewhat higher in terms of processing requirements than an ABS filament. At the igus Adhesive film for the print bed or the Bonding agent for tribofilaments accessory materials are available to facilitate processing.When to use it?

When an increased permanent application temperature of up to 100°C is required.

For highly dynamic plain bearing applications

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260-PF)

If I need a filament that is very easy to process or if I only have an open 3D printer (→ iglidur i150-PF)

Max. moisture absorption (at 23 °C/73 °F, 50% r.h.) : 0.3 Wt.-%, test method DIN 53495

﻿Coefficient of sliding friction, dynamic, against Cf53 steel : 0.24

﻿Coefficient of sliding friction, dynamic, against 304 stainless steel : 0.17

Self-lubricating filament iglidur i180 Components made from the 3D printing material iglidur i180-PF can be used universally for all types of wear parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds. The filament is easy to process on encased 3D printers and is somewhat higher in terms of processing requirements than an ABS filament. At the igus Adhesive film for the print bed or the Bonding agent for tribofilaments accessory materials are available to facilitate processing.When to use it?<ul class="md-block-unordered-list-item"><li>When an increased permanent application temperature of up to 100°C is required.</li><li>For highly dynamic plain bearing applications</li></ul>When not to use it?<ul class="md-block-unordered-list-item"><li>If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260-PF)</li><li>If I need a filament that is very easy to process or if I only have an open 3D printer (→ iglidur i150-PF)</li></ul><h5 class="md-block-header-five">Dimensions</h5>filament diameter2.85 - 3.00 mmOuter diameter spool200 mmInner diameter spool52 mmSpool width55 mm<h5 class="md-block-header-five">General properties</h5><ul class="md-block-unordered-list-item"><li>Colour : white</li><li>Material suitable for : Beginner</li><li>Max. moisture absorption (at 23 °C/73 °F, 50% r.h.) : 0.3 Wt.-%, test method DIN 53495</li><li>Max. water absorption : 0.9 Wt.-%</li><li>Net weight : 250 g</li><li>﻿Coefficient of sliding friction, dynamic, against Cf53 steel : 0.24</li><li>﻿Coefficient of sliding friction, dynamic, against 304 stainless steel : 0.17</li><li>pv value, max. (dry) : 0.23 MPa ⋅ m/s</li></ul>

&nbsp;Self-lubricating filament iglidur i180 

Components made from the 3D printing material iglidur i180-PF can be used universally for all types of wear parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds. The filament is easy to process on encased 3D printers and is somewhat higher in terms of processing requirements than an ABS filament. At the igus Adhesive film for the print bed or the Bonding agent for tribofilaments accessory materials are available to facilitate processing.When to use it?
<ul>
<li>When an increased permanent application temperature of up to 100°C is required.</li>
<li>For highly dynamic plain bearing applications</li>
</ul>
When not to use it?
<ul>
<li>If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260-PF)</li>
<li>If I need a filament that is very easy to process or if I only have an open 3D printer (→ iglidur i150-PF)</li>
</ul>
<h5>Dimensions</h5>
filament diameter
2.85 - 3.00 mm
Outer diameter spool
200 mm
Inner diameter spool
52 mm
Spool width
55 mm
<h5>General properties</h5>
<ul>
<li>Colour : white</li>
<li>Material suitable for : Beginner</li>
<li>Max. moisture absorption (at 23 °C/73 °F, 50% r.h.) : 0.3 Wt.-%, test method DIN 53495</li>
<li>Max. water absorption : 0.9 Wt.-%</li>
<li>Net weight : 250 g</li>
<li>﻿Coefficient of sliding friction, dynamic, against Cf53 steel : 0.24</li>
<li>﻿Coefficient of sliding friction, dynamic, against 304 stainless steel : 0.17</li>
<li>pv value, max. (dry) : 0.23 MPa ⋅ m/s</li>
</ul>

Merek:	Igus
Model:	iglidur I180-PF-0300-0250

Unit	Diskon	Harga Satuan
1 ~ 9	-	Rp 683.063
10++	3% OFF	Rp 662.571

Ukuran

Properti Umum