FLUKE

电力测试

Electrical Power Testing

Pengujian Daya Listrik

Ujian Tenaga Elektrik

การทดสอบกำลังไฟฟ้า

electrical-power-testing

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

电子测试 & 测量

Electrical Testing & Measuring 

electrical testing & measuring 

Pengujian & Pengukuran Listrik

Ujian & Ukuran Elektrik

การทดสอบและการวัดทางไฟฟ้า

electrical-testing-measuring

Fluke TL175E Test Lead, Cat Ii, Cat Iii, 10A

Safety Category	CAT II, CAT II 1000 V, CAT III 1000V

Patented twist top test probes to extend or reduce tip exposure
Probes always show correct category rating for tip exposure being used
Includes removable 4 mm lantern tips
Compatible with all instruments that accept standard 4 mm shrouded banana plugs
EN61010-031 safety ratings CAT III 1000 V, CAT IV 600 V, CAT II 1000 V, 10 A max

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

FLUKE Multimeter Leads, Test Lead Type, 10A Current Rating - TL175E

In need of multitasking testing leads that can easily be adapted for different applications? These TwistGuard multimeter leads from FLUKE are reliable all-rounders. With a quick turn, you can change the exposed probe tip length from 4 up to 19mm. A contrasting inner cable colour lets you know when to replace the product, so there's no need for wear and tear to jeopardise safety. As they've been tested for strain relief to over 30,000 bends without any problems, you can rest assured that these leads are built to work as hard as you do.

• Cable's 1.2m length gives plenty of reach when testing, without pulling on the multimeter
• Standard 4mm banana plugs for compatibility with most FLUKE multimeters
• Double-insulated silicone housing for flexibility in cold temperatures

• Energy sector
• Telecommunications industry
• Manufacturing equipment
• Electronic testing 

<h3 class="md-block-header-three">Fluke TL175E Test Lead, Cat Ii, Cat Iii, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Test Lead</li><li>Connector Type	Banana Plug</li><li>Lead Length	1.2m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000V</li><li>Safety Category	CAT II, CAT II 1000 V, CAT III 1000V</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+55°C</li><li>Safety Category Level	CAT II, CAT III</li></ul>Features &amp; BenefitsPatented twist top test probes to extend or reduce tip exposure Probes always show correct category rating for tip exposure being used Includes removable 4 mm lantern tips Compatible with all instruments that accept standard 4 mm shrouded banana plugs EN61010-031 safety ratings CAT III 1000 V, CAT IV 600 V, CAT II 1000 V, 10 A maxWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.StandardsEN61010-031FLUKE Multimeter Leads, Test Lead Type, 10A Current Rating - TL175EIn need of multitasking testing leads that can easily be adapted for different applications? These TwistGuard multimeter leads from FLUKE are reliable all-rounders. With a quick turn, you can change the exposed probe tip length from 4 up to 19mm. A contrasting inner cable colour lets you know when to replace the product, so there&#x27;s no need for wear and tear to jeopardise safety. As they&#x27;ve been tested for strain relief to over 30,000 bends without any problems, you can rest assured that these leads are built to work as hard as you do.Features &amp; Benefits• Cable&#x27;s 1.2m length gives plenty of reach when testing, without pulling on the multimeter • Standard 4mm banana plugs for compatibility with most FLUKE multimeters • Double-insulated silicone housing for flexibility in cold temperaturesApplications• Energy sector • Telecommunications industry • Manufacturing equipment • Electronic testing

<h3>Fluke TL175E Test Lead, Cat Ii, Cat Iii, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Test Lead</li>
<li>Connector Type	Banana Plug</li>
<li>Lead Length	1.2m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000V</li>
<li>Safety Category	CAT II, CAT II 1000 V, CAT III 1000V</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Safety Category Level	CAT II, CAT III</li>
</ul>
Features &amp; Benefits
Patented twist top test probes to extend or reduce tip exposure 
Probes always show correct category rating for tip exposure being used 
Includes removable 4 mm lantern tips 
Compatible with all instruments that accept standard 4 mm shrouded banana plugs 
EN61010-031 safety ratings CAT III 1000 V, CAT IV 600 V, CAT II 1000 V, 10 A max
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
Standards
EN61010-031
FLUKE Multimeter Leads, Test Lead Type, 10A Current Rating - TL175E
In need of multitasking testing leads that can easily be adapted for different applications? These TwistGuard multimeter leads from FLUKE are reliable all-rounders. With a quick turn, you can change the exposed probe tip length from 4 up to 19mm. A contrasting inner cable colour lets you know when to replace the product, so there's no need for wear and tear to jeopardise safety. As they've been tested for strain relief to over 30,000 bends without any problems, you can rest assured that these leads are built to work as hard as you do.
Features &amp; Benefits
• Cable's 1.2m length gives plenty of reach when testing, without pulling on the multimeter 
• Standard 4mm banana plugs for compatibility with most FLUKE multimeters 
• Double-insulated silicone housing for flexibility in cold temperatures
Applications
• Energy sector 
• Telecommunications industry 
• Manufacturing equipment 
• Electronic testing&nbsp;

TwistGuard Premium Test Leads

Instruction Sheet - TL175

fluke tl175e test lead, cat ii, iii, 10a kabel uji tl175e, electrical power testing pengujian daya listrik ujian tenaga elektrik fluke/福禄克 测试导线，cat ii，cat iii，10a 电力测试 福禄克

Merek:	FLUKE
Model:	TL175/UK

Kabel Uji Fluke TL175E, Cat II, Cat III, 10A