FLUKE

Electrical Safety

Keamanan Listrik

Keselamatan Elektrik

ความปลอดภัยด้านไฟฟ้า

electrical-safety

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

电气安全

electrical safety

Fluke PRV240FS Proving Unit: Test Voltage Indicators

    Prove operation of FieldSense function on T6 electrical testers

    Reduce risk of shock and arc flash by validating tool operation

    Source both AC and DC steady-state voltage (240 V AC/DC)

Verify your test tool works without unnecessary exposure to shock and arc flash. Make the process easy by using the PRV240FS Proving unit. Verifying that your T6 electrical tester is working properly reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification before tests are performed. (PPE is still needed for absence of voltage testing when appropriate).

On the PRV240FS, a single switch and a set of LEDs indicate functionality of both standard AC and DC measurements with test leads, and FieldSense, “no-test-lead” voltage measurement capability. This unit is a simple-to-use solution for complying with verification procedures of your test tools.

The PRV240FS also provides AC and DC voltages for all high impedance instruments in your toolbox. When paired with the included TPAK magnetic hanging strip and the long battery life, including this proving unit in your toolbox is an easy decision. The PRV240FS will last for 2000 tests per set of four AA batteries, with a 10-second test average.

Fluke’s PRV240FS allows you to “Test Before Touch” (TBT), which involves testing your T6 against a known live source before, and after, the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact. The PRV240FS has been tested and includes a IEC61010-1, IEC61010-2-030 safety rating.

Lead time if no stock 4-8 weeks subject to factory confirmation

<h3 class="md-block-header-three">Fluke PRV240FS Proving Unit: Test Voltage Indicators</h3>Key features<ul class="md-block-unordered-list-item"><li> Prove operation of FieldSense function on T6 electrical testers</li><li> Reduce risk of shock and arc flash by validating tool operation</li><li> Source both AC and DC steady-state voltage (240 V AC/DC)</li></ul>Designed for safety and complianceVerify your test tool works without unnecessary exposure to shock and arc flash. Make the process easy by using the PRV240FS Proving unit. Verifying that your T6 electrical tester is working properly reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification before tests are performed. (PPE is still needed for absence of voltage testing when appropriate).On the PRV240FS, a single switch and a set of LEDs indicate functionality of both standard AC and DC measurements with test leads, and FieldSense, “no-test-lead” voltage measurement capability. This unit is a simple-to-use solution for complying with verification procedures of your test tools.The PRV240FS also provides AC and DC voltages for all high impedance instruments in your toolbox. When paired with the included TPAK magnetic hanging strip and the long battery life, including this proving unit in your toolbox is an easy decision. The PRV240FS will last for 2000 tests per set of four AA batteries, with a 10-second test average.“Test Before Touch”Fluke’s PRV240FS allows you to “Test Before Touch” (TBT), which involves testing your T6 against a known live source before, and after, the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement. Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact. The PRV240FS has been tested and includes a IEC61010-1, IEC61010-2-030 safety rating.Lead time if no stock 4-8 weeks subject to factory confirmation

<h3>Fluke PRV240FS Proving Unit: Test Voltage Indicators</h3>
Key features
<ul>
<li> Prove operation of FieldSense function on T6 electrical testers</li>
<li> Reduce risk of shock and arc flash by validating tool operation</li>
<li> Source both AC and DC steady-state voltage (240 V AC/DC)</li>
</ul>
Designed for safety and compliance
Verify your test tool works without unnecessary exposure to shock and arc flash. Make the process easy by using the PRV240FS Proving unit. Verifying that your T6 electrical tester is working properly reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification before tests are performed. (PPE is still needed for absence of voltage testing when appropriate).
On the PRV240FS, a single switch and a set of LEDs indicate functionality of both standard AC and DC measurements with test leads, and FieldSense, “no-test-lead” voltage measurement capability. This unit is a simple-to-use solution for complying with verification procedures of your test tools.
The PRV240FS also provides AC and DC voltages for all high impedance instruments in your toolbox. When paired with the included TPAK magnetic hanging strip and the long battery life, including this proving unit in your toolbox is an easy decision. The PRV240FS will last for 2000 tests per set of four AA batteries, with a 10-second test average.
“Test Before Touch”
Fluke’s PRV240FS allows you to “Test Before Touch” (TBT), which involves testing your T6 against a known live source before, and after, the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact. The PRV240FS has been tested and includes a IEC61010-1, IEC61010-2-030 safety rating.
Lead time if no stock 4-8 weeks subject to factory confirmation

Manual

Datasheet

fluke prv240fs proving unit: test voltage indicators unit pembuktian prv240fs: indikator tegangan uji electrical safety keamanan listrik penunjuk voltan ujian keselamatan elektrik fluke/福禄克 检验装置：测试电压指示器 福禄克

Merek:	FLUKE
Model:	PRV240FS

Unit Pembuktian Fluke PRV240FS: Indikator Tegangan Uji