Fluke Networks

测光表和成像

Light Meters & Imaging

Pengukur Cahaya & Pencitraan

Pengukur Cahaya & Pengimejan

เครื่องวัดแสงและการถ่ายภาพ

light-meters-imaging

测试 & 测量

Test & Measure

test & measure

Tes & Pengukuran

Ujian & Ukuran

การทดสอบและวัดผล

test-measure

Other Test & Measurement

other test & measurement

การทดสอบและการวัดอื่นๆ

other-test-measurement

Fluke Networks Fiberlert Fiber Light Detector  

Detects optical power in SM and MM fiber (850 to 1625 nm)

No setup or interpretation – light and sound indicate signal

“Non-contact” detector reduces risk of contamination and damage

Suitable for ports and patch cords, SM, MM, UPC and APC

LightBeat™ indicates operation and battery status

Just place in front of the fiber end face or port and a light and tone indicate an active fiber (850 nm to 1625 nm) - no setup or interpretation required. 

Ports with a non-contact / non-contaminating detector

The LightBeat™ feature flashes the LED, indicating a powered-on condition and good battery and a timer shuts FiberLert™ off after five minutes of inactivity to extend battery life (2xAAA, included). Rugged design includes a convenient pocket clip and is backed by a two-year warranty. 

Specifications: Fluke Networks FiberLert™ Fiber Light Detector 

Operating Principle: FiberLert is a live fiber detector that senses near infrared light emitted from fiber optic cabling. A continuous red glow at the handle and an audible beeping noise (if not switched off) indicates the presence of near infrared light.

Optical Interface: Non-contact ceramic ferrule. Fits directly with 1.25 mm LC receptacles. Tethered ferrule adapter for testing 1.25 mm ferrule patch cord. Supports single-mode, multimode, UPC and APC connectors and ports.

Optical Power Detection Range: +3 dBm to -30 dBm

Light Detection: Visible steady red LED indicator when optical power is detected

Lightbeat™ Indicator: Flashes twice every two seconds when unit is on and battery strength is sufficient.

Battery Saver: Unit automatically turns off after five minutes of inactivity

Batteries: 2 AAA alkaline batteries included

Battery Life: Typically, greater than 1 year (5 hrs. of use a week)

Item Size: 0.6” x 1.0” x 6.6” / 1.6 x 2.5 x 16.8 cm

Operating Temperature Range: -10 °C to 50 °C

<h3 class="md-block-header-three">Fluke Networks Fiberlert Fiber Light Detector </h3><ul class="md-block-unordered-list-item"><li>Detects optical power in SM and MM fiber (850 to 1625 nm)</li><li>No setup or interpretation – light and sound indicate signal</li><li>“Non-contact” detector reduces risk of contamination and damage</li><li>Suitable for ports and patch cords, SM, MM, UPC and APC</li><li>LightBeat™ indicates operation and battery status</li></ul>Just place in front of the fiber end face or port and a light and tone indicate an active fiber (850 nm to 1625 nm) - no setup or interpretation required. <ul class="md-block-unordered-list-item"><li>Single-mode</li><li>Multimode</li><li>UPC and APC patch cords</li><li>Ports with a non-contact / non-contaminating detector</li></ul>The LightBeat™ feature flashes the LED, indicating a powered-on condition and good battery and a timer shuts FiberLert™ off after five minutes of inactivity to extend battery life (2xAAA, included). Rugged design includes a convenient pocket clip and is backed by a two-year warranty. Specifications: Fluke Networks FiberLert™ Fiber Light Detector <ul class="md-block-unordered-list-item"><li>Operating Principle: FiberLert is a live fiber detector that senses near infrared light emitted from fiber optic cabling. A continuous red glow at the handle and an audible beeping noise (if not switched off) indicates the presence of near infrared light.</li><li>Optical Interface: Non-contact ceramic ferrule. Fits directly with 1.25 mm LC receptacles. Tethered ferrule adapter for testing 1.25 mm ferrule patch cord. Supports single-mode, multimode, UPC and APC connectors and ports.</li><li>Wavelength Detection: 850 nm to 1625 nm</li><li>Optical Power Detection Range: +3 dBm to -30 dBm</li><li>Light Detection: Visible steady red LED indicator when optical power is detected</li><li>Lightbeat™ Indicator: Flashes twice every two seconds when unit is on and battery strength is sufficient.</li><li>Battery Saver: Unit automatically turns off after five minutes of inactivity</li><li>Batteries: 2 AAA alkaline batteries included</li><li>Battery Life: Typically, greater than 1 year (5 hrs. of use a week)</li><li>Item Size: 0.6” x 1.0” x 6.6” / 1.6 x 2.5 x 16.8 cm</li><li>Item Weight: 2.1 oz / 59 g</li><li>Operating Temperature Range: -10 °C to 50 °C</li><li>Operating Humidity Ranges:</li><ul class="md-block-unordered-list-item"><li>95 % (10 °C to 35 °C) Non-condensing</li><li>75 % (35 °C to 40 °C) Non-condensing</li><li>Uncontrolled &lt; 10 °C</li></ul><li>Operating Altitude: ≤ 3000 meters</li><li>Storage Temperature: -20 °C to 50 °C</li></ul>

<h3>Fluke Networks Fiberlert Fiber Light Detector&nbsp;&nbsp;</h3>
<ul>
<li>Detects optical power in SM and MM fiber (850 to 1625 nm)</li>
<li>No setup or interpretation – light and sound indicate signal</li>
<li>“Non-contact” detector reduces risk of contamination and damage</li>
<li>Suitable for ports and patch cords, SM, MM, UPC and APC</li>
<li>LightBeat™ indicates operation and battery status</li>
</ul>
Just place in front of the fiber end face or port and a light and tone indicate an active fiber (850 nm to 1625 nm) - no setup or interpretation required.&nbsp;
<ul>
<li>Single-mode</li>
<li>Multimode</li>
<li>UPC and APC patch cords</li>
<li>Ports with a non-contact / non-contaminating detector</li>
</ul>
The LightBeat™ feature flashes the LED, indicating a powered-on condition and good battery and a timer shuts FiberLert™ off after five minutes of inactivity to extend battery life (2xAAA, included). Rugged design includes a convenient pocket clip and is backed by a two-year warranty.&nbsp;
Specifications: Fluke Networks FiberLert™ Fiber Light Detector&nbsp;
<ul>
<li>Operating Principle: FiberLert is a live fiber detector that senses near infrared light emitted from fiber optic cabling. A continuous red glow at the handle and an audible beeping noise (if not switched off) indicates the presence of near infrared light.</li>
<li>Optical Interface: Non-contact ceramic ferrule. Fits directly with 1.25 mm LC receptacles. Tethered ferrule adapter for testing 1.25 mm ferrule patch cord. Supports single-mode, multimode, UPC and APC connectors and ports.</li>
<li>Wavelength Detection: 850 nm to 1625 nm</li>
<li>Optical Power Detection Range: +3 dBm to -30 dBm</li>
<li>Light Detection: Visible steady red LED indicator when optical power is detected</li>
<li>Lightbeat™ Indicator: Flashes twice every two seconds when unit is on and battery strength is sufficient.</li>
<li>Battery Saver: Unit automatically turns off after five minutes of inactivity</li>
<li>Batteries: 2 AAA alkaline batteries included</li>
<li>Battery Life: Typically, greater than 1 year (5 hrs. of use a week)</li>
<li>Item Size: 0.6” x 1.0” x 6.6” / 1.6 x 2.5 x 16.8 cm</li>
<li>Item Weight: 2.1 oz / 59 g</li>
<li>Operating Temperature Range: -10 °C to 50 °C</li>
<li>Operating Humidity Ranges:</li>
<ul>
<li>95 % (10 °C to 35 °C) Non-condensing</li>
<li>75 % (35 °C to 40 °C) Non-condensing</li>
<li>Uncontrolled &lt; 10 °C</li>
</ul>
<li>Operating Altitude: ≤ 3000 meters</li>
<li>Storage Temperature: -20 °C to 50 °C</li>
</ul>

Merek:	Fluke Networks
Model:	857459ce40

Detektor Cahaya Serat Fiberlert Fluke Networks