FLUKE

Current Clamps

current-clamps

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

电子测试 & 测量

Electrical Testing & Measuring 

electrical testing & measuring 

Pengujian & Pengukuran Listrik

Ujian & Ukuran Elektrik

การทดสอบและการวัดทางไฟฟ้า

electrical-testing-measuring

Fluke I410 Current Clamp, 400A Dc Max, AC/DC Adapter, 400A Ac Ac Max, Voltage Output

 Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.


FLUKE Current Clamp, 60h Battery Life, Hall-Effect Probe - 1640967

Get a grip on electrical flow measurements with this current clamp from FLUKE. Wide jaws with a simple open and close lever make it a cinch to clamp a conductor inside. This means you can safely and conveniently check currents and wiring without disconnecting the circuit. The unit has a versatile Hall-effect type of probe, enabling you to take AC and DC current measurements between 1 and 400A for testing and monitoring industrial or domestic circuits. This current clamp easily plugs into multimeters and volt meter test instruments with its 1.6m cable, letting you access hard-to-reach networks.


• Indicator light so you can see at a glance when it's operational
• 60h battery life for reliability


• Automotive industry
• HVAC equipment
• Electrical engineering


What's the safety category of this current clamp?

The device has a safety category of CAT III 600V, meaning you can use it on busbars as well as distribution and branch circuits.


How can I be sure this clamp maintains its accuracy?

Simply adjust the product's dial to get a zero reading while the jaws are empty. This ensures your readings are accurate.
 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke I410 Current Clamp, 400A Dc Max, AC/DC Adapter, 400A Ac Ac Max, Voltage Output</strong></h3><p class="md-block-unstyled"> Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.<br/>Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.<br/>d.c. current zero control for nulling out jaw/sensor offset<br/>Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents<br/>Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter<br/>Battery check mode<br/>Compatible with meter input impedance ≥1MΩ<br/>Conforms to IEC 1010-1 Cat III 600V<br/><strong class="md-inline-bold"><em class="md-inline-italic">Supplied With:</em></strong> <em class="md-inline-italic">9V PP3 alkaline battery and operators manual.</em><br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE Current Clamp, 60h Battery Life, Hall-Effect Probe - 1640967</strong></h3><p class="md-block-unstyled">Get a grip on electrical flow measurements with this current clamp from FLUKE. Wide jaws with a simple open and close lever make it a cinch to clamp a conductor inside. This means you can safely and conveniently check currents and wiring without disconnecting the circuit. The unit has a versatile Hall-effect type of probe, enabling you to take AC and DC current measurements between 1 and 400A for testing and monitoring industrial or domestic circuits. This current clamp easily plugs into multimeters and volt meter test instruments with its 1.6m cable, letting you access hard-to-reach networks.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features &amp; Benefits</strong></h3><p class="md-block-unstyled">• Indicator light so you can see at a glance when it&#x27;s operational<br/>• 60h battery life for reliability<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">• Automotive industry<br/>• HVAC equipment<br/>• Electrical engineering<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">What&#x27;s the safety category of this current clamp?</strong></h3><p class="md-block-unstyled">The device has a safety category of CAT III 600V, meaning you can use it on busbars as well as distribution and branch circuits.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">How can I be sure this clamp maintains its accuracy?</strong></h3><p class="md-block-unstyled">Simply adjust the product&#x27;s dial to get a zero reading while the jaws are empty. This ensures your readings are accurate.<br/> </p>

<h3><strong>Fluke I410 Current Clamp, 400A Dc Max, AC/DC Adapter, 400A Ac Ac Max, Voltage Output</strong></h3>
<p>&nbsp;Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.<br>
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.<br>
d.c. current zero control for nulling out jaw/sensor offset<br>
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents<br>
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter<br>
Battery check mode<br>
Compatible with meter input impedance ≥1MΩ<br>
Conforms to IEC 1010-1 Cat III 600V<br>
<strong><em>Supplied With:</em></strong> <em>9V PP3 alkaline battery and operators manual.</em><br>
</p>
<h3><strong>FLUKE Current Clamp, 60h Battery Life, Hall-Effect Probe - 1640967</strong></h3>
<p>Get a grip on electrical flow measurements with this current clamp from FLUKE. Wide jaws with a simple open and close lever make it a cinch to clamp a conductor inside. This means you can safely and conveniently check currents and wiring without disconnecting the circuit. The unit has a versatile Hall-effect type of probe, enabling you to take AC and DC current measurements between 1 and 400A for testing and monitoring industrial or domestic circuits. This current clamp easily plugs into multimeters and volt meter test instruments with its 1.6m cable, letting you access hard-to-reach networks.<br>
</p>
<h3><strong>Features &amp; Benefits</strong></h3>
<p>• Indicator light so you can see at a glance when it's operational<br>
• 60h battery life for reliability<br>
</p>
<h3><strong>Applications</strong></h3>
<p>• Automotive industry<br>
• HVAC equipment<br>
• Electrical engineering<br>
</p>
<h3><strong>What's the safety category of this current clamp?</strong></h3>
<p>The device has a safety category of CAT III 600V, meaning you can use it on busbars as well as distribution and branch circuits.<br>
</p>
<h3><strong>How can I be sure this clamp maintains its accuracy?</strong></h3>
<p>Simply adjust the product's dial to get a zero reading while the jaws are empty. This ensures your readings are accurate.<br>
&nbsp;</p>


fluke i410 current clamp, 400a dc max, ac/dc adapter, ac voltage output penjepit arus i410, maks, adaptor ac/dc, tegangan keluaran clamps pengapit maks 400a, penyesuai voltan fluke/福禄克 电流钳，最大 直流，交流/直流适配器，最大 交流，电压输出 福禄克

Penjepit Arus Fluke I410, 400A Dc Maks, Adaptor AC/DC, 400A Ac Ac Maks, Tegangan Keluaran

Penjepit Arus FLUKE, Daya Tahan Baterai 60 jam, Probe Efek Hall - 1640967

Fitur & Manfaat

Aplikasi

Apa kategori keamanan klem arus ini?

Bagaimana saya bisa yakin bahwa penjepit ini tetap akurat?

Merek:	FLUKE
Model:	I410