FLUKE

电力测试

Electrical Power Testing

Pengujian Daya Listrik

Ujian Tenaga Elektrik

การทดสอบกำลังไฟฟ้า

electrical-power-testing

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

电子测试 & 测量

Electrical Testing & Measuring 

electrical testing & measuring 

Pengujian & Pengukuran Listrik

Ujian & Ukuran Elektrik

การทดสอบและการวัดทางไฟฟ้า

electrical-testing-measuring


 The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily.


Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)
Best in class accuracy at 0.01% reading
Simple 2-wire connection for all measurements and protection up to 240VAC
User-selectable 250ohms resistor
Dedicated span and 25% step buttons
24VDC loop power with mA measure mode (-25% to 125%)
Resolution of 1μA on mA ranges and 1mV on voltage ranges
Variable step and ramp time in seconds
Adjustable span selection (0mA to 20mA or 4mA to 20mA)
Small (150mmx90mmx30mm), light (300g) and robust design
Powered by 6 standard AAA batteries (supplied installed)
Auto shutdown to conserve battery life (adjustable up to 30 minutes)
Protective holster (supplied) fits easily into user's hand
Includes built in selectable 250 Ω resistor for HART communication
Provides intuitive user interface with Quick-Set knob for fast setup


Process control automation
Manufacturing
Instrumentation


ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 709H, Loop Calibrator</strong></h3><p class="md-block-unstyled"><br/> The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features and Benefits</strong></h3><p class="md-block-unstyled">Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use<br/>LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)<br/>Best in class accuracy at 0.01% reading<br/>Simple 2-wire connection for all measurements and protection up to 240VAC<br/>User-selectable 250ohms resistor<br/>Dedicated span and 25% step buttons<br/>24VDC loop power with mA measure mode (-25% to 125%)<br/>Resolution of 1μA on mA ranges and 1mV on voltage ranges<br/>Variable step and ramp time in seconds<br/>Adjustable span selection (0mA to 20mA or 4mA to 20mA)<br/>Small (150mmx90mmx30mm), light (300g) and robust design<br/>Powered by 6 standard AAA batteries (supplied installed)<br/>Auto shutdown to conserve battery life (adjustable up to 30 minutes)<br/>Protective holster (supplied) fits easily into user&#x27;s hand<br/>Includes built in selectable 250 Ω resistor for HART communication<br/>Provides intuitive user interface with Quick-Set knob for fast setup<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">Process control automation<br/>Manufacturing<br/>Instrumentation<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Certifications</strong></h3><p class="md-block-unstyled">ANSI/ESD S20.20:2014<br/>BS EN 61340-5-1:2007 </p>

<h3><strong>Fluke 709H, Loop Calibrator</strong></h3>
<p><br>
 The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily.<br>
</p>
<h3><strong>Features and Benefits</strong></h3>
<p>Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use<br>
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)<br>
Best in class accuracy at 0.01% reading<br>
Simple 2-wire connection for all measurements and protection up to 240VAC<br>
User-selectable 250ohms resistor<br>
Dedicated span and 25% step buttons<br>
24VDC loop power with mA measure mode (-25% to 125%)<br>
Resolution of 1μA on mA ranges and 1mV on voltage ranges<br>
Variable step and ramp time in seconds<br>
Adjustable span selection (0mA to 20mA or 4mA to 20mA)<br>
Small (150mmx90mmx30mm), light (300g) and robust design<br>
Powered by 6 standard AAA batteries (supplied installed)<br>
Auto shutdown to conserve battery life (adjustable up to 30 minutes)<br>
Protective holster (supplied) fits easily into user's hand<br>
Includes built in selectable 250 Ω resistor for HART communication<br>
Provides intuitive user interface with Quick-Set knob for fast setup<br>
</p>
<h3><strong>Applications</strong></h3>
<p>Process control automation<br>
Manufacturing<br>
Instrumentation<br>
</p>
<h3><strong>Certifications</strong></h3>
<p>ANSI/ESD S20.20:2014<br>
BS EN 61340-5-1:2007&nbsp;</p>


Fluke 709H, Loop Calibrator

fluke 709h, loop calibrator kalibrator electrical power testing pengujian daya listrik gelung ujian tenaga elektrik fluke/福禄克 709h 回路校准器 电力测试 福禄克

fluke-709h-loop-calibrator

Merek:	FLUKE
Model:	Fluke-709H

Fluke 709H, Kalibrator Loop

Fitur dan Manfaat

Aplikasi

Sertifikasi