FLUKE

电力测试

Electrical Power Testing

Pengujian Daya Listrik

Ujian Tenaga Elektrik

การทดสอบกำลังไฟฟ้า

electrical-power-testing

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

电子测试 & 测量

Electrical Testing & Measuring 

electrical testing & measuring 

Pengujian & Pengukuran Listrik

Ujian & Ukuran Elektrik

การทดสอบและการวัดทางไฟฟ้า

electrical-testing-measuring

 The Fluke 709 Precision Loop Calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Primary functions are source and measure mA signals in the range 0 to 24 mA. The Fluke 709 can measure 0 to 30 V and produce 24Vdc loop power. The 709H includes HART communication functionality and supports a select set of HART universal and common-practice commands. It can be used as a loop calibrator or basic function communicator.
Intuitive interface with Quick-Set rotary encoder knob for fast setup and ease-of-use
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)
Best in class accuracy at 0.01% reading
Simple two-wire connection for all measurements and protection up to 240Vac
User-selectable 250Ω resistor
Dedicated span and 25% step buttons
24Vdc loop power with mA Measure Mode (-25% to 125%)
Resolution of 1μA on mA ranges and 1mV on voltage ranges
Variable step & ramp time in seconds
Adjustable span selection (0 to 20 mA or 4 to 20 mA)
Small (150x90x30mm), light (300g) and robust design
Powered by 6 standard AAA batteries (supplied installed)
Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
Protective holster (supplied) fits easily into user's hand


AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide, safety information 

<h3 class="md-block-header-three">Fluke 709, Loop Calibrator</h3> The Fluke 709 Precision Loop Calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Primary functions are source and measure mA signals in the range 0 to 24 mA. The Fluke 709 can measure 0 to 30 V and produce 24Vdc loop power. The 709H includes HART communication functionality and supports a select set of HART universal and common-practice commands. It can be used as a loop calibrator or basic function communicator. Intuitive interface with Quick-Set rotary encoder knob for fast setup and ease-of-use LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits) Best in class accuracy at 0.01% reading Simple two-wire connection for all measurements and protection up to 240Vac User-selectable 250Ω resistor Dedicated span and 25% step buttons 24Vdc loop power with mA Measure Mode (-25% to 125%) Resolution of 1μA on mA ranges and 1mV on voltage ranges Variable step &amp; ramp time in seconds Adjustable span selection (0 to 20 mA or 4 to 20 mA) Small (150x90x30mm), light (300g) and robust design Powered by 6 standard AAA batteries (supplied installed) Auto Shutdown to conserve battery life (adjustable up to 30 minutes) Protective holster (supplied) fits easily into user&#x27;s hand <h3 class="md-block-header-three">Supplied with</h3>AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide, safety information

<h3>Fluke 709, Loop Calibrator</h3>
&nbsp;The Fluke 709 Precision Loop Calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Primary functions are source and measure mA signals in the range 0 to 24 mA. The Fluke 709 can measure 0 to 30 V and produce 24Vdc loop power. The 709H includes HART communication functionality and supports a select set of HART universal and common-practice commands. It can be used as a loop calibrator or basic function communicator. 
Intuitive interface with Quick-Set rotary encoder knob for fast setup and ease-of-use 
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits) 
Best in class accuracy at 0.01% reading 
Simple two-wire connection for all measurements and protection up to 240Vac 
User-selectable 250Ω resistor 
Dedicated span and 25% step buttons 
24Vdc loop power with mA Measure Mode (-25% to 125%) 
Resolution of 1μA on mA ranges and 1mV on voltage ranges 
Variable step &amp; ramp time in seconds 
Adjustable span selection (0 to 20 mA or 4 to 20 mA) 
Small (150x90x30mm), light (300g) and robust design 
Powered by 6 standard AAA batteries (supplied installed) 
Auto Shutdown to conserve battery life (adjustable up to 30 minutes) 
Protective holster (supplied) fits easily into user's hand 

<h3>Supplied with</h3>
AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide, safety information&nbsp;

Fluke 709, Loop Calibrator

fluke 709, loop calibrator kalibrator electrical power testing pengujian daya listrik gelung ujian tenaga elektrik fluke/福禄克 709 回路校准器 电力测试 福禄克

fluke-709-loop-calibrator

Merek:	FLUKE
Model:	Fluke-709

Fluke 709, Kalibrator Loop

Dilengkapi dengan