Araldite

胶水

Adhesive Glue

Lem Perekat

Gam Pelekat

กาวยาง

adhesive-glue

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

粘合剂

Adhesive 

adhesive 

Perekat

Pelekat

กาว

adhesive

Araldite 2031-1 Epoxy Paste Structural Adhesive - 380ml cartridge

100°C / 212°F Maximum continuous operating temperature*

 * For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa. 

Araldite® 2031-1 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.

Embedded with spacers (glass beads) it retains it's integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines.  It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.

The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger.  We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges.  If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval.

Suitable for metal and composite bonding, good adhesion onto polyamides

Contains spacers to ensure a minimum bond line thickness of 0.05 mm

Araldite 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.

For additional information, consult the TDS and SDS.

It is particularly suitable for GRP, CFRP and SMC bonding.

<h3 class="md-block-header-three">Araldite 2031-1 Epoxy Paste Structural Adhesive - 380ml cartridge</h3> Performance Specifications<ul class="md-block-unordered-list-item"><li>Two-component Epoxy Technology</li><li>60 mins Pot life at RT</li><li>3 hrs Fixture time at RT</li><li>10 mm Gap filling</li><li>100°C / 212°F Maximum continuous operating temperature*</li><li>23 MPa / 3,335 psi Tensile strength</li><li>1 000 MPa / 145,038 psi Tensile modulus</li><li>ca. 12% Elongation at break</li><li> * For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa. </li></ul>Araldite® 2031-1 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.Embedded with spacers (glass beads) it retains it&#x27;s integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines.  It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger.  We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges.  If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our &#x27;it&#x27;s good&#x27; seal of approval.Key Features<ul class="md-block-unordered-list-item"><li>Thixotropic - non slumping</li><li>Toughened adhesive, resilient bond</li><li>Suitable for metal and composite bonding, good adhesion onto polyamides</li><li>High Resistance to chemicals </li><li>Low shrinkage</li><li>Contains spacers to ensure a minimum bond line thickness of 0.05 mm</li></ul>Araldite 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.For additional information, consult the TDS and SDS.It is particularly suitable for GRP, CFRP and SMC bonding.

<h3><ins>Araldite 2031-1 Epoxy Paste Structural Adhesive - 380ml cartridge</ins></h3>
&nbsp;Performance Specifications
<ul>
<li>Two-component Epoxy Technology</li>
<li>60 mins Pot life at RT</li>
<li>3 hrs Fixture time at RT</li>
<li>10 mm Gap filling</li>
<li>100°C / 212°F Maximum continuous operating temperature*</li>
<li>23 MPa / 3,335 psi Tensile strength</li>
<li>1 000 MPa / 145,038 psi Tensile modulus</li>
<li>ca. 12% Elongation at break</li>
<li>&nbsp;* For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa.&nbsp;</li>
</ul>
Araldite® 2031-1 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.
Embedded with spacers (glass beads) it retains it's integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines.  It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.
The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger.  We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges.  If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval.
Key Features
<ul>
<li>Thixotropic - non slumping</li>
<li>Toughened adhesive, resilient bond</li>
<li>Suitable for metal and composite bonding, good adhesion onto polyamides</li>
<li>High Resistance to chemicals </li>
<li>Low shrinkage</li>
<li>Contains spacers to ensure a minimum bond line thickness of 0.05 mm</li>
</ul>
Araldite 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.
For additional information, consult the TDS and SDS.
It is particularly suitable for GRP, CFRP and SMC bonding.

Flyer

Araldite 2031-1 2-part Epoxy Paste Structural Adhesive - 380ml Cartridge

araldite 2031-1 2-part epoxy paste structural adhesive 380ml cartridge perekat struktural pasta epoksi bagian kartrid glue lem bahagian pes pelekat struktur kartrij gam 部分环氧糊状结构胶 墨盒 胶水 爱牢达人

Merek:	Araldite
Model:	2031-1

Araldite 2031-1 Perekat Struktural Tempel Epoksi - Kartrid 380ml