AF Hydro

Pipe Elbow

Pipa Siku

Siku Paip

ข้อศอกท่อ

pipe-elbow

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

管件

Pipe Fittings

pipe fittings

Perlengkapan Pipa

Kelengkapan Paip

อุปกรณ์ท่อ

pipe-fittings

The 45D street elbow is a pipe fitting with a 90-degree right angle bend. The difference between the 45D elbow and the 45D street elbow lies in the connection type. For 45-degree elbow, both connections are female. However, 45-degree street elbow has both male by female ends.   

Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  

The threaded ends ease installation and provide a tighter connection. Welding is not required.

Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.

Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.

To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. 

Remove any excess tape and tighten the joints. 

Do avoid excessive screwing as it may damage the pipe or the fitting. 

Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.  

<h3 class="md-block-header-three"><strong class="md-inline-bold">About This Product</strong></h3><p class="md-block-unstyled">The 45D street elbow is a pipe fitting with a 90-degree right angle bend. The difference between the 45D elbow and the 45D street elbow lies in the connection type. For 45-degree elbow, both connections are female. However, 45-degree street elbow has both male by female ends.   </p><h3 class="md-block-header-three"><strong class="md-inline-bold">More About #150 Fittings</strong></h3><p class="md-block-unstyled">Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.  </p><ul class="md-block-unordered-list-item"><li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li><li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li><li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">How to Connect #150 Fittings?</strong></h3><ol class="md-block-ordered-list-item"><li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal. </li><li>Remove any excess tape and tighten the joints. </li><li>Do avoid excessive screwing as it may damage the pipe or the fitting. </li><li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.  </li></ol>

<h3><strong>About This Product</strong></h3>
<p>The 45D street elbow is a pipe fitting with a 90-degree right angle bend. The difference between the 45D elbow and the 45D street elbow lies in the connection type. For 45-degree elbow, both connections are female. However, 45-degree street elbow has both male by female ends.&nbsp;&nbsp;&nbsp;</p>
<h3><strong>More About #150 Fittings</strong></h3>
<p>Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other.  The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.&nbsp;&nbsp;</p>
<ul>
<li>The threaded ends ease installation and provide a tighter connection. Welding is not required.</li>
<li>Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.</li>
<li>Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.</li>
</ul>
<h3><strong>How to Connect #150 Fittings?</strong></h3>
<ol>
<li>To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.&nbsp;</li>
<li>Remove any excess tape and tighten the joints.&nbsp;</li>
<li>Do avoid excessive screwing as it may damage the pipe or the fitting.&nbsp;</li>
<li>Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.&nbsp;&nbsp;</li>
</ol>


3/8" Npt Male X 3/8" Npt Female Stainless Steel SS316 45 Degree Street Elbow Pipe Fitting 150 Psi

3/8" npt male female stainless steel ss316 45 degree street elbow pipe fitting 150psi pria wanita derajat jalan siku pipa af hydro 3/8” lelaki keluli tahan karat darjah pemasangan paip 外螺纹 内螺纹不锈钢 度街道弯头管件 af水电

Merek:	AF Hydro
Model:	Class #150 Series 45D Male Elbow

Tentang Produk Ini

Lebih lanjut Tentang #150 Fitting

Bagaimana Menghubungkan Fitting #150?