ZIRCON

Test & Measurement

test-measurement

Metal Detectors

metal-detectors

MetalliScanner ®  MT 7 metal detector quickly  and easily locates rebar, pipes, and other metal  before you saw or drill. The bright, backlit  display indicates metal target depth (inches  and centimeters) up to 6 in. deep, type of  metal located (ferrous or non-ferrous),  and whether you are moving towards or away  from a target. Use to find and avoid rebar  in concrete before drilling, to find pipes and  junction boxes behind tile, and even detect  the nails/tacks in studs behind lath and plaster  walls. This powerful tool saves time and  money by eliminating guesswork, rework,  needless holes, and costly broken drill bits  or saw blades. Recommended uses include  locating and reinforcing rebar in masonry and  measuring subsurface nail spacing in roofing  material for compliance with building codes. 

• Features two scanning modes;  Standard mode DeepScan mode 

• Locates and determines the depth of  1⁄2 in. rebar and 1⁄2 in. copper pipe up to  6 in. (15 cm) deep 

• Finds and differentiates ferrous and  non-ferrous metal 

• Position accuracy to within ± 1⁄2 in. (13 mm)  for #4 rebar or 1⁄2 in. copper pipe 

• Backlit display and audio tone clearly  indicate location of target 

• Pivoting handle attachment for extended  and overhead reach 

• Rubberized handle and built-in lanyard loop 

• Includes 9V battery and protective  carrying case 

MetalliScanner ® MT 7 metal detector quickly and easily locates rebar, pipes, and other metal before you saw or drill. The bright, backlit display indicates metal target depth (inches and centimeters) up to 6 in. deep, type of metal located (ferrous or non-ferrous), and whether you are moving towards or away from a target. Use to find and avoid rebar in concrete before drilling, to find pipes and junction boxes behind tile, and even detect the nails/tacks in studs behind lath and plaster walls. This powerful tool saves time and money by eliminating guesswork, rework, needless holes, and costly broken drill bits or saw blades. Recommended uses include locating and reinforcing rebar in masonry and measuring subsurface nail spacing in roofing material for compliance with building codes. • Features two scanning modes; Standard mode DeepScan mode • Locates and determines the depth of 1⁄2 in. rebar and 1⁄2 in. copper pipe up to 6 in. (15 cm) deep • Finds and differentiates ferrous and non-ferrous metal • Position accuracy to within ± 1⁄2 in. (13 mm) for #4 rebar or 1⁄2 in. copper pipe • Backlit display and audio tone clearly indicate location of target • Pivoting handle attachment for extended and overhead reach • Rubberized handle and built-in lanyard loop • Includes 9V battery and protective carrying case

MetalliScanner ® MT 7 metal detector quickly and easily locates rebar, pipes, and other metal before you saw or drill. The bright, backlit display indicates metal target depth (inches and centimeters) up to 6 in. deep, type of metal located (ferrous or non-ferrous), and whether you are moving towards or away from a target. Use to find and avoid rebar in concrete before drilling, to find pipes and junction boxes behind tile, and even detect the nails/tacks in studs behind lath and plaster walls. This powerful tool saves time and money by eliminating guesswork, rework, needless holes, and costly broken drill bits or saw blades. Recommended uses include locating and reinforcing rebar in masonry and measuring subsurface nail spacing in roofing material for compliance with building codes.&nbsp;
• Features two scanning modes; Standard mode DeepScan mode&nbsp;
• Locates and determines the depth of 1⁄2 in. rebar and 1⁄2 in. copper pipe up to 6 in. (15 cm) deep&nbsp;
• Finds and differentiates ferrous and non-ferrous metal&nbsp;
• Position accuracy to within ± 1⁄2 in. (13 mm) for #4 rebar or 1⁄2 in. copper pipe&nbsp;
• Backlit display and audio tone clearly indicate location of target&nbsp;
• Pivoting handle attachment for extended and overhead reach&nbsp;
• Rubberized handle and built-in lanyard loop&nbsp;
• Includes 9V battery and protective carrying case&nbsp;

Product Leaflet

Grace

GEDORE

KNIPEX PLIERS

Kapro

Others

Schulke

Klarus

BESSEY TOOLS

WEIMAN

Torque Wrenches

Other Measuring Tools

Circlip Pliers

Multiple Tools Sets

Water Pump Pliers

Diagonal Pliers

Pincers

Combination Pliers

Drilling Machines

Disinfectants and Sanitisers

Bee Khean

buyerIntroduction

Zircon Metalliscanner

zircon metalliscanner metal detectors pendeteksi logam zirkon pengesan zircon/锆石 金属扫描仪 金属探测器 锆石

zircon-metalliscanner

All-New Deep-Scanning Stud Finder with  Patented Pinch Grip Design, New SpotLite® Pointer, and WireWarning®  Detection The StudSensor™  e50 quickly and easily locates  the edges of wood and metal studs and joists  behind walls, floors, and ceilings. Its easyto-read display screen indicates stud edges,  the patented SpotLite®  Pointer shines a beam  of light on the wall to identify the target, and  WireWarning®  detection indicates the presence  of live AC voltage. Its new patented pinch grip  and contoured shape provide an easy, secure  hold in either hand, at any angle. 

• StudScan mode locates the edges of wood  or metal studs up to ¾ inch (19 mm) deep 

• DeepScan®  mode doubles the scanning  depth to 1½ inches (38 mm) 

• Easy-to-read LCD display indicates when  a stud edge is approached 

• Updated SpotLite®  Pointer shines an arrowshaped light on the wall to mark the target 

• WireWarning®  detection indicates the  presence of live, unshielded electrical wiring  up to 2 inches (51 mm) deep

• Should scanning begin over a stud, Zircon's  patented "over-the-stud" indication alerts the  user to start the scan in a new location

• Patented TruCal®  technology indicates when the tool is calibrated and ready 

All-New Deep-Scanning Stud Finder with Patented Pinch Grip Design, New SpotLite® Pointer, and WireWarning® Detection The StudSensor™ e50 quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. Its easyto-read display screen indicates stud edges, the patented SpotLite® Pointer shines a beam of light on the wall to identify the target, and WireWarning® detection indicates the presence of live AC voltage. Its new patented pinch grip and contoured shape provide an easy, secure hold in either hand, at any angle. • StudScan mode locates the edges of wood or metal studs up to ¾ inch (19 mm) deep • DeepScan® mode doubles the scanning depth to 1½ inches (38 mm) • Easy-to-read LCD display indicates when a stud edge is approached • Updated SpotLite® Pointer shines an arrowshaped light on the wall to mark the target • WireWarning® detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep• Should scanning begin over a stud, Zircon&#x27;s patented &quot;over-the-stud&quot; indication alerts the user to start the scan in a new location• Patented TruCal® technology indicates when the tool is calibrated and ready

All-New Deep-Scanning Stud Finder with Patented Pinch Grip Design, New SpotLite® Pointer, and WireWarning® Detection The StudSensor™ e50 quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. Its easyto-read display screen indicates stud edges, the patented SpotLite® Pointer shines a beam of light on the wall to identify the target, and WireWarning® detection indicates the presence of live AC voltage. Its new patented pinch grip and contoured shape provide an easy, secure hold in either hand, at any angle.&nbsp;
• StudScan mode locates the edges of wood or metal studs up to ¾ inch (19 mm) deep&nbsp;
• DeepScan® mode doubles the scanning depth to 1½ inches (38 mm)&nbsp;
• Easy-to-read LCD display indicates when a stud edge is approached&nbsp;
• Updated SpotLite® Pointer shines an arrowshaped light on the wall to mark the target&nbsp;
• WireWarning® detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep
• Should scanning begin over a stud, Zircon's patented "over-the-stud" indication alerts the user to start the scan in a new location
• Patented TruCal® technology indicates when the tool is calibrated and ready&nbsp;

Studsensor

studsensor sensor pejantan metal detectors pendeteksi logam zircon pengesan zircon/锆石 螺柱传感器 金属探测器 锆石

studsensor

Multifunction Wall Scanner with  CenterVision®  Technology,  Easy-to-Read Display Screen,  and Auto Correcting Technology MultiScanner®  i320 OneStep®  quickly and  easily locates the edges and center of wood  and metal studs and joists behind walls, floors,  and ceilings. It also locates ferrous metal up to 3 in. (76 mm) deep. A 3-mode switch makes  it easy to change functions, while the display  screen, SpotLite®  Pointing System, and audio  tone all indicate the location of the target.  The signal strength indicator helps to  distinguish between shallow and deep targets. 

• StudScan mode locates the edges and  center of wood or metal studs up to ¾ in. (19 mm) deep 

• DeepScan®  mode doubles the scanning  depth to 11⁄2 in. (38 mm) 

• Metal Scan mode locates ferrous metal,  such as rebar, up to 3 in. (76 mm) deep 

• WireWarning®  Detection indicates the presence of live, unshielded electrical wire  up to 2 in. (51 mm) deep 

• ACT™ (Auto Correcting Technology)  automatically corrects common errors,  such as when scanning begins over a stud.

Multifunction Wall Scanner with CenterVision® Technology, Easy-to-Read Display Screen, and Auto Correcting Technology MultiScanner® i320 OneStep® quickly and easily locates the edges and center of wood and metal studs and joists behind walls, floors, and ceilings. It also locates ferrous metal up to 3 in. (76 mm) deep. A 3-mode switch makes it easy to change functions, while the display screen, SpotLite® Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets. • StudScan mode locates the edges and center of wood or metal studs up to ¾ in. (19 mm) deep • DeepScan® mode doubles the scanning depth to 11⁄2 in. (38 mm) • Metal Scan mode locates ferrous metal, such as rebar, up to 3 in. (76 mm) deep • WireWarning® Detection indicates the presence of live, unshielded electrical wire up to 2 in. (51 mm) deep • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud.

Multifunction Wall Scanner with CenterVision® Technology, Easy-to-Read Display Screen, and Auto Correcting Technology MultiScanner® i320 OneStep® quickly and easily locates the edges and center of wood and metal studs and joists behind walls, floors, and ceilings. It also locates ferrous metal up to 3 in. (76 mm) deep. A 3-mode switch makes it easy to change functions, while the display screen, SpotLite® Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.&nbsp;
• StudScan mode locates the edges and center of wood or metal studs up to ¾ in. (19 mm) deep&nbsp;
• DeepScan® mode doubles the scanning depth to 11⁄2 in. (38 mm)&nbsp;
• Metal Scan mode locates ferrous metal, such as rebar, up to 3 in. (76 mm) deep&nbsp;
• WireWarning® Detection indicates the presence of live, unshielded electrical wire up to 2 in. (51 mm) deep&nbsp;
• ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud.

Produce Leaflet

Zircon Multiscanner

zircon multiscanner zirkon metal detectors pendeteksi logam pengesan zircon/锆石 多扫描仪 金属探测器 锆石

zircon-multiscanner

Industrial-Grade Electronic Metal  Locator that utilizes active and inductive  technologies to minimize detection  errors related to different building  materials and construction environments  during the calibration process. The MetalliScanner®  MT X metal locator  is designed to find metal in standard  residential, commercial, and industrial  construction. It is calibrated to locate rebar up to 4 in. (10 cm) deep. Choose from two scanning modes  depending on the environment to  be scanned. Normal Scan for shallow  rebar placed in tight grid patterns and  DeepScan®  for deeper pieces of pipe  or rebar. Use to find or avoid rebar in concrete  before drilling. 

• Large blue transflective backlit LCD  screen for easy viewing, even under  direct sunlight 

• Center and Signal Strength Indication  of metal up to 4 in. (10 cm) deep 

• Battery Strength Indicator continuously  displays the battery level and will  flash when the battery level is too low  for operation 

• Ergonomic handle with Patented  Pivot Pinch Grip design 

• Integrated marker system to  mark target location 

• Pivoting handle attachment  for easier scanning included 

Industrial-Grade Electronic Metal Locator that utilizes active and inductive technologies to minimize detection errors related to different building materials and construction environments during the calibration process. The MetalliScanner® MT X metal locator is designed to find metal in standard residential, commercial, and industrial construction. It is calibrated to locate rebar up to 4 in. (10 cm) deep. Choose from two scanning modes depending on the environment to be scanned. Normal Scan for shallow rebar placed in tight grid patterns and DeepScan® for deeper pieces of pipe or rebar. Use to find or avoid rebar in concrete before drilling. • Large blue transflective backlit LCD screen for easy viewing, even under direct sunlight • Center and Signal Strength Indication of metal up to 4 in. (10 cm) deep • Battery Strength Indicator continuously displays the battery level and will flash when the battery level is too low for operation • Ergonomic handle with Patented Pivot Pinch Grip design • Integrated marker system to mark target location • Pivoting handle attachment for easier scanning included • Water and dust resistant

Industrial-Grade Electronic Metal Locator that utilizes active and inductive technologies to minimize detection errors related to different building materials and construction environments during the calibration process. The MetalliScanner® MT X metal locator is designed to find metal in standard residential, commercial, and industrial construction. It is calibrated to locate rebar up to 4 in. (10 cm) deep. Choose from two scanning modes depending on the environment to be scanned. Normal Scan for shallow rebar placed in tight grid patterns and DeepScan® for deeper pieces of pipe or rebar. Use to find or avoid rebar in concrete before drilling.&nbsp;
• Large blue transflective backlit LCD screen for easy viewing, even under direct sunlight&nbsp;
• Center and Signal Strength Indication of metal up to 4 in. (10 cm) deep&nbsp;
• Battery Strength Indicator continuously displays the battery level and will flash when the battery level is too low for operation&nbsp;
• Ergonomic handle with Patented Pivot Pinch Grip design&nbsp;
• Integrated marker system to mark target location&nbsp;
• Pivoting handle attachment for easier scanning included&nbsp;
• Water and dust resistant&nbsp;

Multifunction Wall Scanner with  CenterVision®  Technology,  Ultra-Bright Display Screen,  and Auto Correcting Technology MultiScanner® i520 OneStep®  quickly and  easily locates studs and joists behind walls,  floors, and ceilings. It also locates metal as  well as live AC electrical wiring. A 4-mode  switch makes it easy to change functions,  while the ultra-bright display screen, SpotLite® Pointing System, and audio tone all indicate  the location of the target. The signal strength  indicator helps to distinguish between shallow  and deep targets. 

• StudScan mode locates the edges and  center of wood or metal studs up to 3⁄4 in. (19 mm) deep 

• AC Scan mode locates live, unshielded  electrical wire up to 2 in. (51 mm) deep 

• ACT™ (Auto Correcting Technology)  automatically corrects common errors,  such as when scanning begins over a stud 

Multifunction Wall Scanner with CenterVision® Technology, Ultra-Bright Display Screen, and Auto Correcting Technology MultiScanner® i520 OneStep® quickly and easily locates studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, SpotLite® Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets. • StudScan mode locates the edges and center of wood or metal studs up to 3⁄4 in. (19 mm) deep • DeepScan® mode doubles the scanning depth to 11⁄2 in. (38 mm) • AC Scan mode locates live, unshielded electrical wire up to 2 in. (51 mm) deep • Metal Scan mode locates ferrous metal, such as rebar, up to 3 in. (76 mm) deep • ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud

Multifunction Wall Scanner with CenterVision® Technology, Ultra-Bright Display Screen, and Auto Correcting Technology MultiScanner® i520 OneStep® quickly and easily locates studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, SpotLite® Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.&nbsp;
• StudScan mode locates the edges and center of wood or metal studs up to 3⁄4 in. (19 mm) deep&nbsp;
• DeepScan® mode doubles the scanning depth to 11⁄2 in. (38 mm)&nbsp;
• AC Scan mode locates live, unshielded electrical wire up to 2 in. (51 mm) deep&nbsp;
• Metal Scan mode locates ferrous metal, such as rebar, up to 3 in. (76 mm) deep&nbsp;
• ACT™ (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud&nbsp;

Center Finding Stud Finder with Easy-to-Read  Display Screen StudSensor™ i65 OneStep®  quickly and easily  locates the edges and center of wood and  metal studs and joists behind walls, floors,  and ceilings. Patented CenterVision®  technology  finds the center of studs in a single pass.  Its easy-to-read display screen indicates  directions, edges and center of studs,  while WireWarning®  detection indicates the  presence of live AC voltage. 

• StudScan mode locates the edges and  center of wood or metal studs up to 3⁄4 in.  (19 mm) deep

• DeepScan®  mode doubles the scanning depth to 11⁄2 in. (38 mm)

• LCD display indicates direction, edges,  and center of studs 

• Patented SpotLite®  Pointing System and  audio tone signals when the stud center  is reached 

• WireWarning®  Detection indicates the  presence of live, unshielded electrical wiring  up to 2 in. (51 mm) deep

• ACT™ (Auto Correcting Technology) automatically corrects common user errors,  such as when scanning begins over a stud 

Center Finding Stud Finder with Easy-to-Read Display Screen StudSensor™ i65 OneStep® quickly and easily locates the edges and center of wood and metal studs and joists behind walls, floors, and ceilings. Patented CenterVision® technology finds the center of studs in a single pass. Its easy-to-read display screen indicates directions, edges and center of studs, while WireWarning® detection indicates the presence of live AC voltage. • StudScan mode locates the edges and center of wood or metal studs up to 3⁄4 in. (19 mm) deep• DeepScan® mode doubles the scanning depth to 11⁄2 in. (38 mm)• LCD display indicates direction, edges, and center of studs • Patented SpotLite® Pointing System and audio tone signals when the stud center is reached • WireWarning® Detection indicates the presence of live, unshielded electrical wiring up to 2 in. (51 mm) deep• ACT™ (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud

Center Finding Stud Finder with Easy-to-Read Display Screen StudSensor™ i65 OneStep® quickly and easily locates the edges and center of wood and metal studs and joists behind walls, floors, and ceilings. Patented CenterVision® technology finds the center of studs in a single pass. Its easy-to-read display screen indicates directions, edges and center of studs, while WireWarning® detection indicates the presence of live AC voltage.&nbsp;
• StudScan mode locates the edges and center of wood or metal studs up to 3⁄4 in. (19 mm) deep
• DeepScan® mode doubles the scanning depth to 11⁄2 in. (38 mm)
• LCD display indicates direction, edges, and center of studs&nbsp;
• Patented SpotLite® Pointing System and audio tone signals when the stud center is reached&nbsp;
• WireWarning® Detection indicates the presence of live, unshielded electrical wiring up to 2 in. (51 mm) deep
• ACT™ (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud&nbsp;