CAT PUMPS

Pumps

pumps

Pumps Accessories

pumps-accessories

Water Pumps

water-pumps

Cat Pumps custom blend crankcase oil is exclusively designed, tested, and proven to maximize the life of your Cat Pump. This specially formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust, and corrosion. Model 6107 contains one 21 oz. bottle. 

Genuine Cat Pumps crankcase oil provides maximum life and performance.  6107 Bottle – 21 ounces.  ISO 68 Change after first 50 hours, then every 500 hours. Suitable for  all piston and plunger pumps 

• Custom blend, premium grade, petroleum-based hydraulic oil for all Cat Pumps. • Anti-wear additives protects metal-to-metal drive surfaces, extending drive life. • High oxidative and chemical stability resists deposit formations and provides consistent fluid performance. • Premium anti-corrosion additives offer protection in the most demanding operating environments. 

Introduction: Cat Pumps custom blend crankcase oil is exclusively designed, tested, and proven to maximize the life of your Cat Pump. This specially formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust, and corrosion. Model 6107 contains one 21 oz. bottle. Genuine Cat Pumps crankcase oil provides maximum life and performance. 6107 Bottle – 21 ounces. ISO 68 Change after first 50 hours, then every 500 hours. Suitable for all piston and plunger pumps Features:• Custom blend, premium grade, petroleum-based hydraulic oil for all Cat Pumps. • Anti-wear additives protects metal-to-metal drive surfaces, extending drive life. • High oxidative and chemical stability resists deposit formations and provides consistent fluid performance. • Premium anti-corrosion additives offer protection in the most demanding operating environments.

<ins>Introduction:</ins> 

Cat Pumps custom blend crankcase oil is exclusively designed, tested, and proven to maximize the life of your Cat Pump. This specially formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust, and corrosion. Model 6107 contains one 21 oz. bottle.&nbsp;
Genuine Cat Pumps crankcase oil provides maximum life and performance. 6107 Bottle – 21 ounces. ISO 68 Change after first 50 hours, then every 500 hours. Suitable for all piston and plunger pumps&nbsp;
<ins>Features:</ins>
• Custom blend, premium grade, petroleum-based hydraulic oil for all Cat Pumps. • Anti-wear additives protects metal-to-metal drive surfaces, extending drive life. • High oxidative and chemical stability resists deposit formations and provides consistent fluid performance. • Premium anti-corrosion additives offer protection in the most demanding operating environments.&nbsp;

Crankcase Oil SDS

Ong Ming Jun Andre

Kranzle

Jabsco

Leader

Others

Pedrollo

Burks

MITSUBISHI

Barnes

Pressure Washers

Diaphragm Pumps

Rotating Piston Pumps

Lubricant Pumps

Rotary Pumps

Electrical Flexible Hose

Multi Purpose Cleaners

Rice, Cereal, Water & Sauce Dispensers

buyerIntroduction

Crankcase Oil Bottle

crankcase oil bottle botol minyak pumps accessories aksesoris pompa cat kotak engkol aksesori pam pumps/猫泵 曲轴箱油瓶 泵配件 猫泵

crankcase-oil-bottle

This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.

• Triplex plunger design ensures high efficiency and low pulsation. 

• Durable high-pressure seals are lubricated and cooled by pumped liquid.

 • Preset low-pressure seals provide secondary protection against external leaks and require no packing adjustments.

 • Belt-driven option provides precision flow setting.

 • Direct-drive option offers a compact footprint for SAE hydraulic motors with a bell housing/flexible coupler assembly. 

• Model 2531C offers an external flush for high-temperature or lowlubricity liquids.

 • Pump comes standard with NBR seals. 

Alternative seal materials are available for higher temperature or chemical compatibility 

INTRODUCTION:This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. Technical Specifications Max Flow: 25 gpm / 94.6 lpmMax Pressure1200Inlet Port Size: 1 1/4&quot; NPT(F)Discharge Port Size: 3/4&quot; NPT(F)RPM: 1025Drive Type(s): Belt, ClutchMaterial: 316 Stainless Steel FEATURES • Triplex plunger design ensures high efficiency and low pulsation. • Durable high-pressure seals are lubricated and cooled by pumped liquid. • Preset low-pressure seals provide secondary protection against external leaks and require no packing adjustments. • Belt-driven option provides precision flow setting. • Direct-drive option offers a compact footprint for SAE hydraulic motors with a bell housing/flexible coupler assembly. • Model 2531C offers an external flush for high-temperature or lowlubricity liquids. • Pump comes standard with NBR seals. <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/gmAwD25RWnO4TXyN9IwvZI.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>Alternative seal materials are available for higher temperature or chemical compatibility

&nbsp;
<ins>INTRODUCTION:</ins>
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.

<ins>Technical Specifications</ins>
 
Max Flow: 25 gpm / 94.6 lpm
Max Pressure1200
Inlet Port Size: 1 1/4" NPT(F)
Discharge Port Size: 3/4" NPT(F)
RPM: 1025
Drive Type(s): Belt, Clutch
Material: 316 Stainless Steel

<ins>FEATURES </ins>
• Triplex plunger design ensures high efficiency and low pulsation.&nbsp;
• Durable high-pressure seals are lubricated and cooled by pumped liquid.
&nbsp;• Preset low-pressure seals provide secondary protection against external leaks and require no packing adjustments.
&nbsp;• Belt-driven option provides precision flow setting.
&nbsp;• Direct-drive option offers a compact footprint for SAE hydraulic motors with a bell housing/flexible coupler assembly.&nbsp;
• Model 2531C offers an external flush for high-temperature or lowlubricity liquids.
&nbsp;• Pump comes standard with NBR seals.&nbsp;

 <div class="img-ctnr">
 <amp-img 
 on="tap:2tepd"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/gmAwD25RWnO4TXyN9IwvZI.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2tepd" 
 layout="nodisplay"></amp-image-lightbox>

 
Alternative seal materials are available for higher temperature or chemical compatibility&nbsp;

25 Plunger Pump Technical Data Sheet

25 PFR Plunger Pump Service Manual

Cat Pumps 25 Frame Plunger Pump 2531

cat pumps 25 frame plunger pump 2531 pompa rangka water air pam pumps/猫泵 框架柱塞泵 水泵 猫泵

cat-pumps-25-frame-plunger-pump-2531

 This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel inlet manifold, duplex stainless steel discharge manifold, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. 

Drive Type(s)Belt, Flexible Coupling and Bellhousing

 • Triplex design delivers high efficiency and low pulsation. 

• Durable dual V-Packings are lubricated and cooled by pumped liquid. 

• Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.

• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.

• Standard NBR seals with alternative options for temperature and chemical compatibility. 

Introduction: This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel inlet manifold, duplex stainless steel discharge manifold, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. Technical Specifications: Max Flow40 gpm / 151.4 lpmMax Pressure2000Inlet Port Size1 1/2&quot; NPT(F)Discharge Port Size1&quot; NPT(F)RPM888Drive Type(s)Belt, Flexible Coupling and BellhousingMaterial316 Stainless Steel • Triplex design delivers high efficiency and low pulsation. • Durable dual V-Packings are lubricated and cooled by pumped liquid. • Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.• Standard NBR seals with alternative options for temperature and chemical compatibility.

<ins>Introduction:</ins>&nbsp;
&nbsp;This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel inlet manifold, duplex stainless steel discharge manifold, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.&nbsp;
<ins>Technical Specifications:</ins>
&nbsp;Max Flow40 gpm / 151.4 lpm
Max Pressure2000
Inlet Port Size1 1/2" 
NPT(F)Discharge Port Size
1" NPT(F)RPM888
Drive Type(s)Belt, Flexible Coupling and Bellhousing
Material316 Stainless Steel&nbsp;
&nbsp;• Triplex design delivers high efficiency and low pulsation.&nbsp;
• Durable dual V-Packings are lubricated and cooled by pumped liquid.&nbsp;
• Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.
• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
• Standard NBR seals with alternative options for temperature and chemical compatibility.&nbsp;

3531 Data Sheet

35 Frame Stainless Steel Plunger Pump 3531DHS

35 frame stainless steel plunger pump 3531dhs pompa bingkai water pumps air cat pam keluli tahan karat pumps/猫泵 35框架不锈钢柱塞泵3531dhs 水泵 猫泵

35-frame-stainless-steel-plunger-pump-3531dhs

This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Stainless Steel manifolds, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as salt water.

Drive Type(s): Belt, Flexible Coupling and Bellhousing

Introduction: This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Stainless Steel manifolds, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as salt water.Technical Specifications:Max Flow: 14 gpm / 53 lpmMax Pressure: 3000Inlet Port Size1 1/2&quot; NPT(F)Discharge Port Size 1&quot; NPT(F)RPM: 800Drive Type(s): Belt, Flexible Coupling and BellhousingMaterial: 316 Stainless Steel FEATURES: • Triplex design delivers high efficiency and low pulsation. • Durable dual V-Packings are lubricated and cooled by pumped liquid. • Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.• Standard NBR seals with alternative options for temperature and chemical compatibility.

<ins>Introduction:</ins>&nbsp;
This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Stainless Steel manifolds, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as salt water.
<ins>Technical Specifications:</ins>
Max Flow: 14 gpm / 53 lpm
Max Pressure: 3000
Inlet Port Size1 1/2" NPT(F)
Discharge Port Size 1" NPT(F)
RPM: 800
Drive Type(s): Belt, Flexible Coupling and Bellhousing
Material: 316 Stainless Steel&nbsp;
<ins> FEATURES:</ins>
&nbsp;• Triplex design delivers high efficiency and low pulsation.&nbsp;
• Durable dual V-Packings are lubricated and cooled by pumped liquid.&nbsp;
• Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.
• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
• Standard NBR seals with alternative options for temperature and chemical compatibility.&nbsp;

CAT Pumps 3511 Technical Data Sheet

CAT Pumps 3511 Service Manual

Cat Pumps 35 Frame Plunger Pump 3511

cat pumps 35 frame plunger pump 3511 water pompa air pam pumps/猫泵 框架柱塞泵 水泵 猫泵

cat-pumps-35-frame-plunger-pump-3511

 This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316SS manifold, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as DI water and salt water. 

Inlet Pressure v Water Temperature Vaporization and Caviation Analaysis

With ambient temperatures, piston pumps can handle a maximum negative suction of -8.5 psi (20 feet of water) and plunger  pumps can handle a maximum negative suction -5 psi (11.5 feet of water). As the temperature of the water increases, the vapor  pressure (pressure required to remain liquid) also increases. By increasing the inlet pressure to the pump, you can minimize the  increased risk of cavitation.  To achieve the recommended inlet pressures with elevated temperatures, it is often necessary to use a booster pump. The booster  pump should be approximately twice the system capacity to assure adequate flow into the pump. See chart on front page.  REDUCTION IN RPM In addition to increasing the inlet pressure to the pump as temperature increases, reducing the pump rpm will also offer added  protection. Reducing the rpm reduces the acceleration and vaporization of the water. Lower rpm reduces the risk of cavitation and  its damaging effects. See chart on front for recommended rpm.

 If more than 5-6 feet from the pump or long feed lines or a booster pump or high temperature are present, an inlet stabilizer  should be installed to stabilize inlet pressure.  Note: An inlet stabilizer will not function with a negative suction inlet. INCREASED LINE SIZE It is always important to have the inlet supply line sized to match or be one size larger than the pump inlet port for optimum  performance, but it is most critical when the pumped liquid is at elevated temperatures. Under sizing the line will only compound  the problems of high temperature vaporization. See individual pump data sheet. 

The optimum installation for ambient temperature water requires a properly sized baffled supply tank. The tank should be  enclosed and 6-10 times the system capacity with at least two baffles. 

Introduction: This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316SS manifold, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as DI water and salt water. Technical Specifications:Max Flow: 10 gpm / 37.9 lpmMax Pressure: 2200Inlet Port: Size3/4&quot; NPT(F)Discharge Port Size1/2&quot; NPT(F)RPM: 958Drive Type(s): Belt, ClutchMaterial316 Stainless SteelInlet Pressure v Water Temperature Vaporization and Caviation Analaysis<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/mCAnnKkJMK3J3Qw6J5zc3x.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure> PRESSURIZED INLET With ambient temperatures, piston pumps can handle a maximum negative suction of -8.5 psi (20 feet of water) and plunger pumps can handle a maximum negative suction -5 psi (11.5 feet of water). As the temperature of the water increases, the vapor pressure (pressure required to remain liquid) also increases. By increasing the inlet pressure to the pump, you can minimize the increased risk of cavitation. To achieve the recommended inlet pressures with elevated temperatures, it is often necessary to use a booster pump. The booster pump should be approximately twice the system capacity to assure adequate flow into the pump. See chart on front page. REDUCTION IN RPM In addition to increasing the inlet pressure to the pump as temperature increases, reducing the pump rpm will also offer added protection. Reducing the rpm reduces the acceleration and vaporization of the water. Lower rpm reduces the risk of cavitation and its damaging effects. See chart on front for recommended rpm.INLET STABILIZER If more than 5-6 feet from the pump or long feed lines or a booster pump or high temperature are present, an inlet stabilizer should be installed to stabilize inlet pressure. Note: An inlet stabilizer will not function with a negative suction inlet. INCREASED LINE SIZE It is always important to have the inlet supply line sized to match or be one size larger than the pump inlet port for optimum performance, but it is most critical when the pumped liquid is at elevated temperatures. Under sizing the line will only compound the problems of high temperature vaporization. See individual pump data sheet. PROPERLY SIZED AND BAFFLED SUPPLY TANK The optimum installation for ambient temperature water requires a properly sized baffled supply tank. The tank should be enclosed and 6-10 times the system capacity with at least two baffles.

<ins>Introduction:</ins>
&nbsp;This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316SS manifold, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as DI water and salt water.&nbsp;
<ins>Technical Specifications:</ins>
Max Flow: 10 gpm / 37.9 lpm
Max Pressure: 2200
Inlet Port: Size3/4" NPT(F)
Discharge Port Size1/2" NPT(F)
RPM: 958
Drive Type(s): Belt, Clutch
Material316 Stainless Steel
<ins>Inlet Pressure v Water Temperature Vaporization and Caviation Analaysis</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:brgd3"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/mCAnnKkJMK3J3Qw6J5zc3x.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="brgd3" 
 layout="nodisplay"></amp-image-lightbox>

 
<ins> PRESSURIZED INLET </ins>
With ambient temperatures, piston pumps can handle a maximum negative suction of -8.5 psi (20 feet of water) and plunger pumps can handle a maximum negative suction -5 psi (11.5 feet of water). As the temperature of the water increases, the vapor pressure (pressure required to remain liquid) also increases. By increasing the inlet pressure to the pump, you can minimize the increased risk of cavitation. To achieve the recommended inlet pressures with elevated temperatures, it is often necessary to use a booster pump. The booster pump should be approximately twice the system capacity to assure adequate flow into the pump. See chart on front page. REDUCTION IN RPM In addition to increasing the inlet pressure to the pump as temperature increases, reducing the pump rpm will also offer added protection. Reducing the rpm reduces the acceleration and vaporization of the water. Lower rpm reduces the risk of cavitation and its damaging effects. See chart on front for recommended rpm.
<ins>INLET STABILIZER</ins>
&nbsp;If more than 5-6 feet from the pump or long feed lines or a booster pump or high temperature are present, an inlet stabilizer should be installed to stabilize inlet pressure. Note: An inlet stabilizer will not function with a negative suction inlet. INCREASED LINE SIZE It is always important to have the inlet supply line sized to match or be one size larger than the pump inlet port for optimum performance, but it is most critical when the pumped liquid is at elevated temperatures. Under sizing the line will only compound the problems of high temperature vaporization. See individual pump data sheet.&nbsp;
<ins>PROPERLY SIZED AND BAFFLED SUPPLY TANK</ins>&nbsp;
The optimum installation for ambient temperature water requires a properly sized baffled supply tank. The tank should be enclosed and 6-10 times the system capacity with at least two baffles.&nbsp;

Cat Pumps 1051 Service Manual

Cat Pumps 1051 Data Sheet

TSURUMI PUMP

Cat Pumps 15 Frame Plunger Reverse Osmosis Pump

cat pumps 15 frame plunger reverse osmosis pump pompa water air pam pumps/猫泵 框架柱塞反渗透泵 水泵 猫泵

cat-pumps-15-frame-plunger-reverse-osmosis-pump

 Due to the design of positive displacement pumps, small pressure spikes are caused during each rotation. In certain operations, these spikes can cause accelerated wear or damage to the pump or downstream components. The installation of a pulsation dampener is the best practice to reduce pressure fluctuations 

 • Protects downstream components (e.g., regulator, unloader, relief valve) 

• Reduces water hammer • Improved performance at low rpm  

Introduction: Due to the design of positive displacement pumps, small pressure spikes are caused during each rotation. In certain operations, these spikes can cause accelerated wear or damage to the pump or downstream components. The installation of a pulsation dampener is the best practice to reduce pressure fluctuations Pulsation Dampener Benefits: • Produces smooth, consistent flow • Protects downstream components (e.g., regulator, unloader, relief valve) • Reduces water hammer • Improved performance at low rpm

<ins>Introduction:</ins>
&nbsp;Due to the design of positive displacement pumps, small pressure spikes are caused during each rotation. In certain operations, these spikes can cause accelerated wear or damage to the pump or downstream components. The installation of a pulsation dampener is the best practice to reduce pressure fluctuations&nbsp;
<ins> Pulsation Dampener Benefits</ins>:&nbsp;
• Produces smooth, consistent flow
&nbsp;• Protects downstream components (e.g., regulator, unloader, relief valve)&nbsp;
• Reduces water hammer • Improved performance at low rpm&nbsp;&nbsp;

Cat Pumps Accessories Catalogue

Pulsation Dampener

pulsation dampener peredam denyut pumps accessories aksesoris pompa cat denyutan aksesori pam pumps/猫泵 脉动阻尼器 泵配件 猫泵

pulsation-dampener

This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a brass manifold, 304 stainless steel valve assemblies, solid ceramic plunger and standard NBR (Buna-N) seals and O-rings.

The 1CX is the perfect fit for misting applications that require 0.5 GPM or less. With seals that run thousands of hours before requiring any servicing, the 1CX is small but has the same life expectancy as our industrial products. This ultra-compact, direct-drive single plunger misting-cooling pump includes a pressure regulator for maintaining pressure with multiple nozzles. 1CX Series pumps couple to custom-designed 1/4 or 1/2 HP single-phase 60 Hz motors to fit in small spaces. There is a 50 Hz motor available as well. An optional pulse hose reduces pulsation and lowers the amp draw.

Electric Motor: ½ HP, 230V, Single Phase, 50Hz

Unit includes Regulator, and arrives assembled and with Pulse Hose.

Introduction: This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a brass manifold, 304 stainless steel valve assemblies, solid ceramic plunger and standard NBR (Buna-N) seals and O-rings.The 1CX is the perfect fit for misting applications that require 0.5 GPM or less. With seals that run thousands of hours before requiring any servicing, the 1CX is small but has the same life expectancy as our industrial products. This ultra-compact, direct-drive single plunger misting-cooling pump includes a pressure regulator for maintaining pressure with multiple nozzles. 1CX Series pumps couple to custom-designed 1/4 or 1/2 HP single-phase 60 Hz motors to fit in small spaces. There is a 50 Hz motor available as well. An optional pulse hose reduces pulsation and lowers the amp draw.Technical Specifications:Max Flow:0.5 gpm / 1.9 lpmMax Pressure: 1250 PSIInlet Port Size: 3/8&quot; NPT(F)Discharge Port Size: 1/4&quot;Electric Motor: ½ HP, 230V, Single Phase, 50HzDrive Type(s): DirectMaterial: Brass Unit includes Regulator, and arrives assembled and with Pulse Hose.

<ins>Introduction:</ins>&nbsp;
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a brass manifold, 304 stainless steel valve assemblies, solid ceramic plunger and standard NBR (Buna-N) seals and O-rings.
The 1CX is the perfect fit for misting applications that require 0.5 GPM or less. With seals that run thousands of hours before requiring any servicing, the 1CX is small but has the same life expectancy as our industrial products. This ultra-compact, direct-drive single plunger misting-cooling pump includes a pressure regulator for maintaining pressure with multiple nozzles. 1CX Series pumps couple to custom-designed 1/4 or 1/2 HP single-phase 60 Hz motors to fit in small spaces. There is a 50 Hz motor available as well. An optional pulse hose reduces pulsation and lowers the amp draw.
<ins>Technical Specifications:</ins>
Max Flow:0.5 gpm / 1.9 lpm
Max Pressure: 1250 PSI
Inlet Port Size: 3/8"&nbsp;
NPT(F)Discharge Port Size: 1/4"
Electric Motor: ½ HP, 230V, Single Phase, 50Hz
Drive Type(s): Direct
Material: Brass&nbsp;
Unit includes Regulator, and arrives assembled and with Pulse Hose.

Misting / Cooling Brochure

Data Sheet

Compact Misting Pump W / Regulator and Pulse Hose

compact misting pump regulator pulse hose pompa kabut kompak dengan dan selang pulsa water pumps air cat pam kabus padat pengawal selia hos nadi pumps/猫泵 带调节器和脉冲软管的紧凑型喷雾泵 水泵 猫泵

compact-misting-pump-w-regulator-and-pulse-hose

 This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. 

 • Triplex design offers high-efficiency and low-pulsation. 

• Nickel Aluminum Bronze and 316 Stainless Steel models available to suit a range of high-salinity sea water or chemicals.

• 316 Stainless Steel is stronger and aids in corrosion resistance with aggressive liquids and sea water. • Belt-driven option provides precision flow setting.

• Compact direct-drive with bell housing and flexible coupler assembly.

• NEMA or IEC electric motor or SAE hydraulic options available. 

Drive Type(s): Belt, Clutch, Flexible Coupling and Bellhousing Material Nickel Aluminum Bronze 

Introduction: This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. Features: • Triplex design offers high-efficiency and low-pulsation. • Nickel Aluminum Bronze and 316 Stainless Steel models available to suit a range of high-salinity sea water or chemicals.• 316 Stainless Steel is stronger and aids in corrosion resistance with aggressive liquids and sea water. • Belt-driven option provides precision flow setting.• Compact direct-drive with bell housing and flexible coupler assembly.• NEMA or IEC electric motor or SAE hydraulic options available. • Pump comes standard with NBR seals. Alternative seal materials are available for higher temperature or chemical compatibility Technical SpecificationsMax Flow 3.5 gpm / 13.2 lpmMax Pressure 1500Inlet Port Size1/2&quot; NPT(F)Discharge Port Size3/8&quot; NPT(F)RPM1420Drive Type(s): Belt, Clutch, Flexible Coupling and Bellhousing Material Nickel Aluminum Bronze

<ins>Introduction:</ins>
&nbsp;This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.&nbsp;
&nbsp;<ins>Features:</ins>
&nbsp;• Triplex design offers high-efficiency and low-pulsation.&nbsp;
• Nickel Aluminum Bronze and 316 Stainless Steel models available to suit a range of high-salinity sea water or chemicals.
• 316 Stainless Steel is stronger and aids in corrosion resistance with aggressive liquids and sea water. • Belt-driven option provides precision flow setting.
• Compact direct-drive with bell housing and flexible coupler assembly.
• NEMA or IEC electric motor or SAE hydraulic options available.&nbsp;
• Pump comes standard with NBR seals.&nbsp;
Alternative seal materials are available for higher temperature or chemical compatibility&nbsp;
<ins>Technical Specifications</ins>
Max Flow 3.5 gpm / 13.2 lpm
Max Pressure 1500
Inlet Port Size1/2"
&nbsp;NPT(F)Discharge Port Size
3/8" NPT(F)RPM1420
Drive Type(s): Belt, Clutch, Flexible Coupling and Bellhousing Material Nickel Aluminum Bronze&nbsp;

277 Technical Data Sheet

Cat Pumps 3 Frame Plunger Pump

cat pumps frame plunger pump water pompa air pam pumps/猫泵 框架柱塞泵 水泵 猫泵

cat-pumps-3-frame-plunger-pump

• Unique spring-loaded inlet valves and flow-through ceramic plungers provide a smooth, steady flow.

• Hollow shaft direct-drive configuration provides the smallest possible footprint for confined spaces.

• Pump comes standard with NBR seals. Alternative seal materials are available for higher temperature or chemical compatibility.

Technical SpecificationsMax Flow: 0.5 gpm /1.9 lpmMax Pressure: 1200Inlet Port Size: 3/8&quot; NPT(F)Discharge Port Size: 3/8&quot; NPT(F)RPM: 1725Drive Type(s)DirectMaterial: 316 Stainless Steel FEATURES• Unique spring-loaded inlet valves and flow-through ceramic plungers provide a smooth, steady flow.• Hollow shaft direct-drive configuration provides the smallest possible footprint for confined spaces.• Pump comes standard with NBR seals. Alternative seal materials are available for higher temperature or chemical compatibility.

&nbsp;
<ins>Technical Specifications</ins>
Max Flow: 0.5 gpm /1.9 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725Drive Type(s)
DirectMaterial: 316 Stainless Steel&nbsp;

<ins>FEATURES</ins>
• Unique spring-loaded inlet valves and flow-through ceramic plungers provide a smooth, steady flow.
• Hollow shaft direct-drive configuration provides the smallest possible footprint for confined spaces.
• Pump comes standard with NBR seals. Alternative seal materials are available for higher temperature or chemical compatibility.