Enerpac 50 Ton D/A Cylinder c/w Standard Saddle CLRG504
Integral stop ring provides piston blow-out protection
- Double-acting for positive retraction
- Baked enamel outside finish and plated pistons provide superior corrosion resistance
- Safety valve in retract side of cylinder helps to prevent damage in case of accidental over pressurization
- Interchangeable, hardened grooved saddles are standard
- Plunger wiper reduces contamination, extending cylinder life Saddles
All CLRG-Series cylinders are equipped with bolt-on removable grooved saddles. For information on optional tilt saddles, see selection chart.
Gauges
A pilot-operated check valve (V-42) can be inserted between cylinder ports. This valve provides a safety lock on the cylinder under load at any position and remote control for unlocking.
Optimum Performance
Enerpac’s range of Z-Class electric pumps, fitted with manual or solenoid operated 3-way valves, offer optimum combinations with CLGR cylinders
Low Height-High Tonnage
When low height with high force is required, CLPSeries Pancake Cylinders with lock nut offer the solution to lift the first few inches.
Specifications
Model Number CLRG504
Unit 1 pc
Max. Cylinder Capacity (t) 50
Stroke (inch) 3.94
Cylinder Effective Area Push (inch)11.81
Cylinder Effective Area Pull (inch) 5.85
Oil Capacity Push (inch)46.50
Oil Capacity Pull (inch)23.02
Collapsed Height (inch) 8.35
Maximum Operating Pressure (psi) 10000
Extended Height B (inch) 12.28
Outside Diameter D (inch) 5.12
Cylinder Bore Diameter E (inch) 3.88
Plug Diameter F (mm) 2.76
Base to Advance Port H (inch) 1.65
Standard Saddle Diameter J (inch) 1.97
Saddle Protrusion from Plunger K (inch) 0.04
Depth of Plunger Hole L (inch)0.75
