Anti-static virgin rubber rubber mat, usually 2mm, 3mm, 4mm and 5mm thick,

double-layer composite structure, the surface layer is about 0.4-0.5mm thick static

dissipative layer, and the bottom layer is about 1.5-4.6mm thick static conductive

layer . The key raw materials are made of imported nitrile rubber, superconducting

carbon black and domestic high-quality virgin rubber. Compared with rubber pads

made of recycled rubber raw materials, it has more stability, environmental

protection and long-term anti-static properties. This product can meet the

environmental protection requirements of the latest EU ROHS2.0 standard, and the

smell is very low. The product type number of the anti-static native rubber pad is

CXB15.

Width : 1000 mm / 1200 mm(addtional cost)     

Length : 10 m/roll   

Colour : Green/Black/Grey

TRANSCOL dissipative / conductive native rubber mat

( CXB15, Changan series )

1. Anti-static safety performance indicators

1） Point-to-point resistance ( RTT) : 1. 0 E + 05 --- 1.0 E + 08 ohms

2） System Resistance(resistance to ground,RTG) : ≤ 1.0 E+ 08 ohms;

3） Electrostatic leakage resistance: ≤ 100M ohms

4） Point-to-point resistance > the electrostatic leakage resistance

5） Static sensitive environment: A Class area

6） Static Hazardous Environment: E b Grade or above

7） Triboelectric voltage : ≤ 20V ( volts ) ;

8） Electrostatic decay period (ie electrostatic discharge time) : ≤ 0.3S (seconds ) ;

9） 12.0% RH low humidity environment:

Point-to-point resistance < 1.0 E + 09 ohms;

Point to groundable point resistance < 1.0 E + 09 ohms;

The above nine anti-static safety indicators must be met at the same time;

2. Non - flammable (explosion-proof) surface layer : non-flammable rubber, no sparks are produced；

（it has passed the authoritative appraisal of the non-flammable test. ）

3. Fire safety:

1 ) Flame retardant B1 Class combustion performance ;

2 ) C-class critical heat radiation flux , up to 4.7 kW/m 2

( Standards require Class C: CHF ≥ 4.5 kW/m 2 ) ;

3 ) The smoke production is s1 level , reaching 366% Xmin

(standard requirement ≤ 750 % Xmin );

4 ) The height of the flame tip within 20s is Class C , reaching 45mm

(standard requirement ≤ 150mm ) ;

5） Flue gas toxicity level t0 , reaching ZA1 level ;

4. Electrical insulation safety:

AC breakdown voltage ≥1 KV (above 3mm thickness specifications)

5. Environmental protection and safety:

EU RoHS2.0;

No lead (lead poisoning);

No carcinogen of o-benzene plasticizer;

Free of formaldehyde;

Slight rubber smell , no pungent odor;

Low halogen (below 3000ppm) or customizable halogen free (below 900ppm);

(The halogen content is generally required in the field of precision electronics, please specify the

specific requirements for the content range. Halogen free products can be customized.)

6. Anti-static long-term effect: Offical warranty two years; Effective use > 5 Years (customer tracking data)

(According to the customer tracking data accumulated by TRANSCOL, under normal use conditions, the validity is

more than 5 years.)

The above product performance indicators are all basic safety indicators and must be met at the same time. Each

safety indicator must provide a corresponding authoritative third-party inspection and appraisal report!

Remarks: The above indicators can be used as a reference for product safety selection, bidding

or technical disclosure; the above indicators can be verified, and there are corresponding

authoritative third-party testing and appraisal reports for verification or real samples for client-

side testing and verification . (If it involves the identification of confidentiality standards, it is

necessary to sign a confidentiality contract or provide a copy of the stamped version after the

confidentiality responsibility is specified in the purchase contract)