Shopping List
Shopping List
MYR - RM
Image
/
/
/
/
Drylin® D1 Motor Control System for Stepper, Dc and EC/BLDC Motors
Drylin® D1 Motor Control System for Stepper, Dc and EC/BLDC Motors
Image
Image
Image
Image
Product Description

  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff
  • Free pattern programs
  • dryve motor control system - select, click, control...

    Travel distances, positions, speeds, operating times - easily defined with the new igus® web-based control system for drylin® E linear systems.
  • No software or app installation necessary, fast commissioning
  • Control possible via smartphone (browser), tablet or laptop
  • Simple and intuitive user interface, control system set up in just a few minutes
  • Compatible with numerous industrial controllers (e.g. Siemens S7/Beckhoff)
  • For DC, EC and stepper motors
  • Cost-effective

Ready to use immediately

The dryve motor control system can either be connected to your network or you can connect it directly to the control unit (PC or PLC) by means of a network cable.
You can then call up the control system directly in the browser without installing any software.
Settings can therefore be made in one minute.
Easy control

You can use the simple intuitive user interface to parameterise travels, position,
speed and operating time of your linear axis even as an amateur. Movements that are continuously repeated
are known as "looping" and can be set in just a few seconds. A teach function enables position settings to be made with just one mouse click.
Industry standards

Due to standardised communication protocols such as CANopen or Modbus TCP as gateway,
it is very easy to connect the system to industrial controllers, such as the Siemens S7 or Beckhoff.
The ten digital inputs and five outputs enable extremely easy communication with industrial controllers  
but also with low-price open-source modules, such as Arduino or Raspberry Pi.Powerful technology

dryve supports DC, EC and stepper motors both in open loop and closed loop technology.

The supply voltage of up to 48V ensures high motor speeds. The nominal current
of 7A and the peak current of 21A results in powerful and dynamic movements.

Highly Matched Items
View items that have the same or are a close match to the specifications of this item
Electric Motors from Igus
Source & compare similar products
More from Electric Motors
Expand your search with a wider selection
Recently Viewed Products
Compare & Refer to previously viewed items
Image
Top