CB-200 A4 21-Ring Plastic Comb Binding Machine

In the modern digital world and its projected paperless world, we are using more paper in offices and homes than before. One simple way to avoid paper disorganistion is to use a binding machine to bind them into volumes. Be it reports, legal documents, meeting notes, research papers or business plans, technically this can be accomplished by anyone using a simple binding machine, together with plastic combs or steel wire-O type. Once done, they can be neatly put away or stored.

The CB200 Binding machine is designed with a heavy and sturdy metal base for firm operations. Four rubber studs at four corners provide non-slip operations. It has a punching capacity of 12 sheets of 80gsm paper with a maximum binding capacity of 420 sheets using a plastic comb of 51mm diameter.

The machine is used to punch and bind A4 size or smaller size paper documents. The Adjustable Edge Guide on the left side, together with the printed guides on the metal surface top easily assist to position the paper alignment and provide for accurate hole punching each time and everytime. Hole punching is effortless with the U-shape large metal handle. A Depth Plunger Device in front of the machine helps to measure the thickness of the paper put in to be punched. On the right side of machine, near the back, a Depth Margin Slider allows for the depth margin between the edge of paper and the hole to be punched to be adjusted to suit different diameter of the comb used. A built-in storage tray is used to collect waste paper.

The binding process is very simple:

• Adjust depth margin using Depth Margin Slider on the right hand side
• Make adjustment using the Adjustable Edge Guide to align for paper size used
• Punch one piece of same size paper to determine correct settings of steps 1 & 2
• Punch all stack of paper as required for the volume (note: do a small stack one at a time only), including covers & dividers if needed
• Determine the size of comb to be used, dependent on number of sheets in the volume
• Put plastic comb in position and crank open the plastic rings with the U-shape metal handle
• Insert the whole stack, aligning the holes and the fingers, release handle to complete binding process

Technical Data:

• Overall Dimension: W:376mm x D:245mm x H:300mm
• Punching Capacity: Up to 12 shts of 80g A4 paper each time
• Binding Capacity: Up to 420 shts of 80g paper (51mm comb)
• Number of Holes: 21 x (Rectagular hole: 3mm x 8mm)
• Sliding locating block for easy paper alignment on the left
• Depth margin slider (4 different positions)
• Document thickness measure
• Removable waste bin tray
• Rubber studded base offering non-slip operation
• Nett Weight: 5.7kg; Individually packed
• Also A5 size binding(15 holes); or B5 size binding(17 holes)

Warranty against Factory Defects: 6 months from date of purchase, carry-in with proof of purchase required.