Machinery Lubricants

machinery-lubricants

Lubricants

lubricants

Machinery

machinery

Other Machines

other-machines

Other Hand Tools

other-hand-tools

Other Tools

other-tools

Pullers

pullers

Simatherm

simatherm Bearing BInduction Heater IH 210, 400-460V
Heat large rolling bearings up to 300 kg

The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. 

· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty 

Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / < 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum

Scope of delivery 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm 

Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm 

 Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices
 
Typical components which can be heated with the IH 210
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

*Lead time: 3 to 4 weeks upon order confirmation

simatherm Bearing BInduction Heater IH 210, 400-460V Heat large rolling bearings up to 300 kgThe most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. · For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Available for voltages of 200, 400–480 and 500–575 V · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 year manufacturer warranty Technical data for simather IH 210 Designation: Heater for large workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 10.0 kVA - 440–480 V / 50–60 Hz / 11.5 kVA - 575 V / 60 Hz / 10.4 kVA Workpiece: - Maximum weight: 300 kg - Bore diameter: From 60 mm inner diameter to 640 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal magnetic flux: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 250 x 250 mm Coil diameter: 135 mm Measurements (LxWxH): 600 x 350 x 420 mm Overall weight including yokes: 75 kg Number of standard yokes: 2 Standard yokes: - 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm - 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm Core cross-section: 70 x 70 mm Yoke storage: yes, integrated Cooling fan: optional Sliding yoke: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 210 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm · 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment/lifting devices Typical components which can be heated with the IH 210 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/s1kybNXRhBctdkyZtOjuEV.jpg" alt="
 " /><figcaption class="md-block-image-caption"> </figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/JyODLzjFEAaaQ1E35iMtnL.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Bearing BInduction Heater IH 210, 400-460V 
Heat large rolling bearings up to 300 kg
The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing.&nbsp;
· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty&nbsp;
<ins>Technical data for simather IH 210</ins>&nbsp;
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum&nbsp;
<ins>Scope of delivery</ins> 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm&nbsp;
Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm&nbsp;
Industry target groups and applications&nbsp;
&nbsp;<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment/lifting devices 
 
<ins>Typical components which can be heated with the IH 210</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:74sn7"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/s1kybNXRhBctdkyZtOjuEV.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="74sn7" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:9k098"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/JyODLzjFEAaaQ1E35iMtnL.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="9k098" 
 layout="nodisplay"></amp-image-lightbox>

Technical Data

simatherm & simatool product catalog

Silver

Simalube

Silver 

buyerIntroduction

Simatherm Bearing Induction Heater Ih 210 (400-460V, up to 300kg)

simatherm bearing induction heater ih 210 (400-460v, 300kg) pemanas induksi bantalan hingga machines mesin lainnya aruhan galas sehingga lain-lain simatherm/西马瑟姆 轴承感应加热器 210（400-460v，最高 300kg） 其他机器 西马瑟姆

simatherm-bearing-induction-heater-ih-210-400-460v-up-to-300kg

 * Lead time: 3 to 4 weeks upon order confirmation

Enhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator. Its compact size makes it unique in the global market as the smallest automatic lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. 

unlimited range of uses in any location, confined and hard-to-reach spaces

freely selectable dispensing cycle of 1 to 12 months

IP68 certified and EX certified for all zones

environmental sustainability,  easy disposal at the end of the dispensing cycle

No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance

Easy installation and cost-saving solution suitable for a wide range of industries.  The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). 

Applications of simalube single-point lubricators:

ventilation system (HVAC Heating, ventilation, and air-conditioning)

Direct application to lubrication point to prevent contamination by dust and debris (IP68).

Keep your equipment running smoothly and extend its lifespan with Simalube 15ml Automatic Lubricator. Order now and experience improved efficiency and reduced operational hassles,

* Lead time: 3 to 4 weeks upon order confirmationEnhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator. Its compact size makes it unique in the global market as the smallest automatic lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 15ML Automatic Lubricator:<ul class="md-block-unordered-list-item"><li>unlimited range of uses in any location, confined and hard-to-reach spaces</li><li>freely selectable dispensing cycle of 1 to 12 months</li><li>IP68 certified and EX certified for all zones</li><li>environmental sustainability, easy disposal at the end of the dispensing cycle</li><li>simalube can be refilled up to 3 times </li><li>No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance</li></ul>Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of simalube single-point lubricators:<ul class="md-block-unordered-list-item"><li>pump</li><li>motor engine</li><li>rolling bearings</li><li>chains</li><li>conveyor belts</li><li>gears</li><li>lifting systems</li><li>linear/sliding guides</li><li>threaded spindles</li><li>ventilation system (HVAC Heating, ventilation, and air-conditioning)</li></ul><figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/KcepBkRaJhQS0CynmFYPFZ.png" alt="Direct application to lubrication point to prevent contamination by dust and debris (IP68)." /><figcaption class="md-block-image-caption">Direct application to lubrication point to prevent contamination by dust and debris (IP68).</figcaption></figure>Keep your equipment running smoothly and extend its lifespan with Simalube 15ml Automatic Lubricator. Order now and experience improved efficiency and reduced operational hassles,

&nbsp;* Lead time: 3 to 4 weeks upon order confirmation
Enhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator. Its compact size makes it unique in the global market as the smallest automatic lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.&nbsp;
<ins>Simalube 15ML Automatic Lubricator:</ins>
<ul>
<li>unlimited range of uses in any location, confined and hard-to-reach spaces</li>
<li>freely selectable dispensing cycle of 1 to 12 months</li>
<li>IP68 certified and EX certified for all zones</li>
<li>environmental sustainability, easy disposal at the end of the dispensing cycle</li>
<li>simalube can be refilled up to 3 times&nbsp;</li>
<li>No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance</li>
</ul>
Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX).&nbsp;
<ins>Applications of simalube single-point lubricators:</ins>
<ul>
<li>pump</li>
<li>motor engine</li>
<li>rolling bearings</li>
<li>chains</li>
<li>conveyor belts</li>
<li>gears</li>
<li>lifting systems</li>
<li>linear/sliding guides</li>
<li>threaded spindles</li>
<li>ventilation system (HVAC Heating, ventilation, and air-conditioning)</li>
</ul>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bq0mi"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/KcepBkRaJhQS0CynmFYPFZ.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bq0mi" 
 layout="nodisplay"></amp-image-lightbox>

 
Keep your equipment running smoothly and extend its lifespan with Simalube 15ml Automatic Lubricator. Order now and experience improved efficiency and reduced operational hassles,

Simalube Automatic Lubrication Catalog & Spec Sheet

Simalube 15ml Automatic Lubricator

simalube 15ml automatic lubricator pelumas otomatis lubricants pelincir automatik simalube/西马鲁贝 自动润滑器 润滑剂 西马鲁贝

simalube-15ml-automatic-lubricator

simalube 15ml empty for self-filling with grease

simalube 15ml empty for self-filling with oil

simalube 15ml with multipurpose grease

simalube 15ml with food industry grease

simalube 15ml with chain oil

Lubricator Type

Simatool

simatool Bearing Puller BP 61
Remove grooved ball bearings efficiently from shafts

The tool for efficient dismounting of deep groove ball bearings
With the extractor tool BP 61, deep groove ball bearings can be removed from the shaft. It is also equally suited for removing bearings from just a shaft. Even sealed bearings can be dismounted once the seal is removed. The hooks of the puller arms are placed in the outer ring. The toolset can be used with 70 different kinds of deep groove ball bearings with diameters of 10 to 100 mm.

· The hooks of the puller arms latch directly into the outer raceway and support themselves on the shoulder of the inner ring, creating a secure hold and optimal power transfer 

· The hooks are spring-mounted onto the puller arms so that they can easily fit into the bearing 

· The high-quality steel puller arms are resilient and intended for long-lasting use 

· For shaft diameters measuring from 10–100 mm 

· All components are available as spare parts 

· An elastomer locking ring simplifies the attachment of the puller arms and holds them in position during the extraction process 

· The elastic locking ring simplifies tool set-up and holds the puller arms in position during extraction 

· The puller can also be used to remove sealed bearings from blind housings after the seal has been removed 

· Retaining flap simplifies attachment of the puller arms to the spindle and holds them in position

Scope of delivery
· 6 sets with 3 puller arms each
· 2 spindles
· 1 counter bracket

Application areas of the BP 61
· General manufacture and maintenance in plant and mechanical engineering
· Maintenance of agricultural, municipal and construction machinery
· Maintenance of electric motors
· Maintenance of pumps
· Gearbox maintenance
· Maintenance of materials handling equipment
· Maintenance of paper and plastics processing

Lead time: 3 to 4 weeks upon order confirmation

simatool Bearing Puller BP 61 Remove grooved ball bearings efficiently from shafts The tool for efficient dismounting of deep groove ball bearings With the extractor tool BP 61, deep groove ball bearings can be removed from the shaft. It is also equally suited for removing bearings from just a shaft. Even sealed bearings can be dismounted once the seal is removed. The hooks of the puller arms are placed in the outer ring. The toolset can be used with 70 different kinds of deep groove ball bearings with diameters of 10 to 100 mm.· The hooks of the puller arms latch directly into the outer raceway and support themselves on the shoulder of the inner ring, creating a secure hold and optimal power transfer · The hooks are spring-mounted onto the puller arms so that they can easily fit into the bearing · The high-quality steel puller arms are resilient and intended for long-lasting use · For shaft diameters measuring from 10–100 mm · All components are available as spare parts · An elastomer locking ring simplifies the attachment of the puller arms and holds them in position during the extraction process · The elastic locking ring simplifies tool set-up and holds the puller arms in position during extraction · The puller can also be used to remove sealed bearings from blind housings after the seal has been removed · Retaining flap simplifies attachment of the puller arms to the spindle and holds them in position Scope of delivery · 6 sets with 3 puller arms each · 2 spindles · 1 counter bracket Application areas of the BP 61 · General manufacture and maintenance in plant and mechanical engineering · Maintenance of agricultural, municipal and construction machinery · Maintenance of electric motors · Maintenance of pumps · Gearbox maintenance · Maintenance of materials handling equipment · Maintenance of paper and plastics processingLead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/g~u1R0qj4NyfPQzNGE6CVz.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatool Bearing Puller BP 61 
Remove grooved ball bearings efficiently from shafts 
 
<ins>The tool for efficient dismounting of deep groove ball bearings</ins> 
With the extractor tool BP 61, deep groove ball bearings can be removed from the shaft. It is also equally suited for removing bearings from just a shaft. Even sealed bearings can be dismounted once the seal is removed. The hooks of the puller arms are placed in the outer ring. The toolset can be used with 70 different kinds of deep groove ball bearings with diameters of 10 to 100 mm.
· The hooks of the puller arms latch directly into the outer raceway and support themselves on the shoulder of the inner ring, creating a secure hold and optimal power transfer&nbsp;
· The hooks are spring-mounted onto the puller arms so that they can easily fit into the bearing&nbsp;
· The high-quality steel puller arms are resilient and intended for long-lasting use&nbsp;
· For shaft diameters measuring from 10–100 mm&nbsp;
· All components are available as spare parts&nbsp;
· An elastomer locking ring simplifies the attachment of the puller arms and holds them in position during the extraction process&nbsp;
· The elastic locking ring simplifies tool set-up and holds the puller arms in position during extraction&nbsp;
· The puller can also be used to remove sealed bearings from blind housings after the seal has been removed&nbsp;
· Retaining flap simplifies attachment of the puller arms to the spindle and holds them in position 
 
<ins>Scope of delivery</ins> 
· 6 sets with 3 puller arms each 
· 2 spindles 
· 1 counter bracket 
 
<ins>Application areas of the BP 61</ins> 
· General manufacture and maintenance in plant and mechanical engineering 
· Maintenance of agricultural, municipal and construction machinery 
· Maintenance of electric motors 
· Maintenance of pumps 
· Gearbox maintenance 
· Maintenance of materials handling equipment 
· Maintenance of paper and plastics processing
Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:5pt9v"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/g~u1R0qj4NyfPQzNGE6CVz.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5pt9v" 
 layout="nodisplay"></amp-image-lightbox>

simatool & simatherm product flyer

Bearing Puller BP 61

bearing puller bp 61 bantalan penarik pullers simatool galas simatool/西马工具 轴承拉拔器 拔轮器 西马工具

bearing-puller-bp-61

simatherm Bearing BInduction Heater IH 210, 200-230V 
Heat large rolling bearings up to 300 kg

The most powerful table-top heater
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.

· For rolling bearings weighing up to 300 kg
· Extremely simple operation thanks to the sliding yoke
· Available for voltages of 200, 400–480 and 500–575 V
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption
· Particularly compact design - including the yokes only 75 kg in weight
· Automatic demagnetization
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy
· For workpieces with an inner diameter of 60 to 640 mm
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· 3 year manufacturer warranty

 
Technical data for simather IH 210
Designation: Heater for large workpieces
Voltage V / Hz / power:
- 400 V / 50 Hz / 10.0 kVA
- 440–480 V / 50–60 Hz / 11.5 kVA
- 575 V / 60 Hz / 10.4 kVA
Workpiece:
- Maximum weight: 300 kg
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter
Temperature control: 
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
- Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Error guide codes: yes
Thermal magnetic flux: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard with LED-display
Size of the operating area (WxH): 250 x 250 mm
Coil diameter: 135 mm
Measurements (LxWxH): 600 x 350 x 420 mm
Overall weight including yokes: 75 kg
Number of standard yokes: 2
Standard yokes:
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm
Core cross-section: 70 x 70 mm
Yoke storage: yes, integrated
Cooling fan: optional
Sliding yoke: yes
Housing material: aluminum
 
Scope of delivery
· 1x simatherm IH 210
· 1x User manual
· 1x Temperature probe
· 1x Power cord
· 1x Protective gloves
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm

Optional:
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm

Industry target groups and applications
 
Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

 General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices
 
Typical components which can be heated with the VOLCANO
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Bearing BInduction Heater IH 210, 200-230V Heat large rolling bearings up to 300 kgThe most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.· For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Available for voltages of 200, 400–480 and 500–575 V · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 year manufacturer warranty Technical data for simather IH 210 Designation: Heater for large workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 10.0 kVA - 440–480 V / 50–60 Hz / 11.5 kVA - 575 V / 60 Hz / 10.4 kVA Workpiece: - Maximum weight: 300 kg - Bore diameter: From 60 mm inner diameter to 640 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal magnetic flux: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 250 x 250 mm Coil diameter: 135 mm Measurements (LxWxH): 600 x 350 x 420 mm Overall weight including yokes: 75 kg Number of standard yokes: 2 Standard yokes: - 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm - 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm Core cross-section: 70 x 70 mm Yoke storage: yes, integrated Cooling fan: optional Sliding yoke: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 210 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm · 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment/lifting devices Typical components which can be heated with the VOLCANO · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/XBuTetHObwZeIg4hHSkoMc.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Ej7SyR_Gybyklxz349lyxK.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Bearing BInduction Heater IH 210, 200-230V 
Heat large rolling bearings up to 300 kg
The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.
· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty 
 
 
<ins>Technical data for simather IH 210</ins> 
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm 
 
Optional: 
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
 <ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment/lifting devices 
 
<ins>Typical components which can be heated with the VOLCANO</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:l51i"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/XBuTetHObwZeIg4hHSkoMc.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="l51i" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:4tp35"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Ej7SyR_Gybyklxz349lyxK.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="4tp35" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 210 (200-230V, up to 300kg)

simatherm bearing induction heater ih 210 (200-230v, 300kg) pemanas induksi bantalan hingga machines mesin lainnya aruhan galas sehingga lain-lain simatherm/西马瑟姆 轴承感应加热器 210（200-230v，最高 300kg） 其他机器 西马瑟姆

simatherm-bearing-induction-heater-ih-210-200-230v-up-to-300kg

simatherm Induction Heater IH 025 VOLCANO
The lightest portable induction heater in the world

The lightweight portable device with excellent performance
With a weight of only 3.5 kg, the simatherm IH 025 VOLCANO is the lightest portable induction heater in the world. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg.

· Portable, compact and very light (3.5 kg) - comes in a practical carrying case
· No support yoke required – simply place the workpiece on the device
· A bearing weighing 5 kg can be heated to 110°C in under four minutes
· Predictive Temperature Control (PTC) for automatic temperature monitoring
· Automatic demagnetization
· For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm
· For workpieces weighing up to 10 kg
· Multi-stage power reduction for heating smaller parts
· Silent in operation
· 3 year manufacturer warranty

 
Technical data for simatherm IH 025 VOLCANO
Designation: Heaters for small workpieces
Voltage V / Hz / power:
- 220 – 240 V / 50 – 60 Hz / 1.5 kVA
- 110 – 120 V / 50 – 60 Hz / 1.15 kVA
- 100 V / 50 – 60 Hz / 1.0 kVA
Workpiece:
- Maximum weight: 10 kg
- Bore diameter: From 20 mm inner diameter to 160 mm outer diameter
Temperature control: 
- Range: 20 – 180°C (68–356°F)
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C to 110°C (± 6°F to 230°F)
Time control: Range 0 – 10 minutes, in steps of 0.1 minutes
Maximum temperature (approx.): 180°C (356°F)
Thermometer mode: yes
Bearing temperature mode: yes
Power reduction: 8 levels/ 10-20-30-40-50-60-80-100% (at each level, the performance can be additionally halved)
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Suitability for precision bearings: yes
Error guide codes: yes
Thermal overload protection: yes
Control panel: Keyboard with LED-display
Dimensions (LxWxH): 340 x 250 x 64 mm (over the cone 121 mm)
Overall weight: 3.5 kg
Housing material: plastic
Cooling fan: yes


Scope of delivery 
· 1x simatherm IH 025 VOLCANO
· 1x User manual
· 1x Temperature probe
· 1x Carrying bag
· 1x Protective gloves
· 1x Power cord

Industry target groups and applications

Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

 General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

 Typical components which can be heated with the VOLCANO
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Induction Heater IH 025 VOLCANO The lightest portable induction heater in the world The lightweight portable device with excellent performance With a weight of only 3.5 kg, the simatherm IH 025 VOLCANO is the lightest portable induction heater in the world. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg. · Portable, compact and very light (3.5 kg) - comes in a practical carrying case · No support yoke required – simply place the workpiece on the device · A bearing weighing 5 kg can be heated to 110°C in under four minutes · Predictive Temperature Control (PTC) for automatic temperature monitoring · Automatic demagnetization · For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm · For workpieces weighing up to 10 kg · Multi-stage power reduction for heating smaller parts · Silent in operation · 3 year manufacturer warranty Technical data for simatherm IH 025 VOLCANO Designation: Heaters for small workpieces Voltage V / Hz / power: - 220 – 240 V / 50 – 60 Hz / 1.5 kVA - 110 – 120 V / 50 – 60 Hz / 1.15 kVA - 100 V / 50 – 60 Hz / 1.0 kVA Workpiece: - Maximum weight: 10 kg - Bore diameter: From 20 mm inner diameter to 160 mm outer diameter Temperature control: - Range: 20 – 180°C (68–356°F) - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C to 110°C (± 6°F to 230°F) Time control: Range 0 – 10 minutes, in steps of 0.1 minutes Maximum temperature (approx.): 180°C (356°F) Thermometer mode: yes Bearing temperature mode: yes Power reduction: 8 levels/ 10-20-30-40-50-60-80-100% (at each level, the performance can be additionally halved) Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Suitability for precision bearings: yes Error guide codes: yes Thermal overload protection: yes Control panel: Keyboard with LED-display Dimensions (LxWxH): 340 x 250 x 64 mm (over the cone 121 mm) Overall weight: 3.5 kg Housing material: plastic Cooling fan: yes Scope of delivery · 1x simatherm IH 025 VOLCANO · 1x User manual · 1x Temperature probe · 1x Carrying bag · 1x Protective gloves · 1x Power cord Industry target groups and applicationsFabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the VOLCANO · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/nOQYUt_5XuihrDsz0BwHqq.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/hxwrTmZSokjDwyNfRjEKn2.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 025 VOLCANO 
The lightest portable induction heater in the world 
 
The lightweight portable device with excellent performance 
With a weight of only 3.5 kg, the simatherm IH 025 VOLCANO is the lightest portable induction heater in the world. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg. 
 
· Portable, compact and very light (3.5 kg) - comes in a practical carrying case 
· No support yoke required – simply place the workpiece on the device 
· A bearing weighing 5 kg can be heated to 110°C in under four minutes 
· Predictive Temperature Control (PTC) for automatic temperature monitoring 
· Automatic demagnetization 
· For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm 
· For workpieces weighing up to 10 kg 
· Multi-stage power reduction for heating smaller parts 
· Silent in operation 
· 3 year manufacturer warranty 
 
 
<ins>Technical data for simatherm IH 025 VOLCANO</ins> 
Designation: Heaters for small workpieces 
Voltage V / Hz / power: 
- 220 – 240 V / 50 – 60 Hz / 1.5 kVA 
- 110 – 120 V / 50 – 60 Hz / 1.15 kVA 
- 100 V / 50 – 60 Hz / 1.0 kVA 
Workpiece: 
- Maximum weight: 10 kg 
- Bore diameter: From 20 mm inner diameter to 160 mm outer diameter 
Temperature control: 
- Range: 20 – 180°C (68–356°F) 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C to 110°C (± 6°F to 230°F) 
Time control: Range 0 – 10 minutes, in steps of 0.1 minutes 
Maximum temperature (approx.): 180°C (356°F) 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power reduction: 8 levels/ 10-20-30-40-50-60-80-100% (at each level, the performance can be additionally halved) 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Suitability for precision bearings: yes 
Error guide codes: yes 
Thermal overload protection: yes 
Control panel: Keyboard with LED-display 
Dimensions (LxWxH): 340 x 250 x 64 mm (over the cone 121 mm) 
Overall weight: 3.5 kg 
Housing material: plastic 
Cooling fan: yes 
 
 
Scope of delivery 
· 1x simatherm IH 025 VOLCANO 
· 1x User manual 
· 1x Temperature probe 
· 1x Carrying bag 
· 1x Protective gloves 
· 1x Power cord 
 
Industry target groups and applications
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
 <ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
 <ins>Typical components which can be heated with the VOLCANO</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:dk230"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/nOQYUt_5XuihrDsz0BwHqq.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="dk230" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:9vklc"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/hxwrTmZSokjDwyNfRjEKn2.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="9vklc" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Portable Bearing Induction Heater Volcano (up to 10kg)

simatherm portable bearing induction heater volcano (up 10kg) pemanas induksi bantalan portabel gunung berapi (hingga machines mesin lainnya (sehingga lain-lain simatherm/西马瑟姆 便携式轴承感应加热器火山（最多 10 公斤） 其他机器 西马瑟姆

simatherm-portable-bearing-induction-heater-volcano-up-to-10kg

 simatool Bearing Handling Tool BHT 500-700 (max. lifting force 500kg)   
The safe solution for handling large and heavy bearings

The safe solution for handling medium, large and very large bearings
The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings.

The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control.

· Bearing bore remains free for mounting on shaft
· Mounting on shaft in horizontal and vertical position possible
· Avoidance of accident risk
· Can be used in combination with simatherm induction heaters
· TÜV SÜD certified

Scope of delivery 
· 2 carrying belts
· 2 high-quality handles
· 1 pair of protective gloves
· 2 turning handles for safe handling
· 2 steel clamping strips
· 2 inner race fasteners

Application areas of the BHT
· General manufacture and maintenance in plant and mechanical engineering
· Maintenance of agricultural, municipal and construction machinery
· Maintenance of electric motors
· Maintenance of pumps
· Gearbox maintenance
· Maintenance of conveyor technology
· Maintenance of paper and plastics processing

simatool Bearing Handling Tool BHT 500-700 (max. lifting force 500kg) The safe solution for handling large and heavy bearingsThe safe solution for handling medium, large and very large bearings The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings. The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control. · Bearing bore remains free for mounting on shaft · Mounting on shaft in horizontal and vertical position possible · Avoidance of accident risk · Can be used in combination with simatherm induction heaters · TÜV SÜD certified Scope of delivery · 2 carrying belts · 2 high-quality handles · 1 pair of protective gloves · 2 turning handles for safe handling · 2 steel clamping strips · 2 inner race fasteners Application areas of the BHT · General manufacture and maintenance in plant and mechanical engineering · Maintenance of agricultural, municipal and construction machinery · Maintenance of electric motors · Maintenance of pumps · Gearbox maintenance · Maintenance of conveyor technology · Maintenance of paper and plastics processing*Lead time: 3 to 4 weeks upon order confirmation Application images<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/HxGXpB0qYkOIWXBl35GC6w.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/pShWfCIw3ZbYVYPgcFK19n.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/V3iTI1zzZxho7biXgF3wpw.png" alt="Use with simatherm induction heater" /><figcaption class="md-block-image-caption">Use with simatherm induction heater</figcaption></figure>

&nbsp;simatool Bearing Handling Tool BHT 500-700 (max. lifting force 500kg) 
The safe solution for handling large and heavy bearings
The safe solution for handling medium, large and very large bearings 
The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings. 
 
The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control. 
 
· Bearing bore remains free for mounting on shaft 
· Mounting on shaft in horizontal and vertical position possible 
· Avoidance of accident risk 
· Can be used in combination with simatherm induction heaters 
· TÜV SÜD certified 
 
<ins>Scope of delivery </ins> 
· 2 carrying belts 
· 2 high-quality handles 
· 1 pair of protective gloves 
· 2 turning handles for safe handling 
· 2 steel clamping strips 
· 2 inner race fasteners 
 
<ins>Application areas of the BHT</ins> 
· General manufacture and maintenance in plant and mechanical engineering 
· Maintenance of agricultural, municipal and construction machinery 
· Maintenance of electric motors 
· Maintenance of pumps 
· Gearbox maintenance 
· Maintenance of conveyor technology 
· Maintenance of paper and plastics processing
*Lead time: 3 to 4 weeks upon order confirmation

<ins>Application images</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:166bo"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/HxGXpB0qYkOIWXBl35GC6w.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="166bo" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:elf8v"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/pShWfCIw3ZbYVYPgcFK19n.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="elf8v" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:fmpma"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/V3iTI1zzZxho7biXgF3wpw.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="fmpma" 
 layout="nodisplay"></amp-image-lightbox>

Bearing Handling Tool Product Flyer

Bearing Handling Tool 500-700 (max. Lifting Force 500kg)

bearing handling tool 500-700 (max. lifting force 500kg) alat penanganan bantalan (maks. gaya angkat tools lainnya simatool pengendalian galas daya alatan lain simatool/西马工具 轴承搬运工具 500-700（最大提升力 500kg） 其他工具 西马工具

bearing-handling-tool-500-700-max-lifting-force-500kg

simatherm Induction Heater IH 090, 400-460V/50-60Hz; with fan
Heat smaller to medium-sized rolling bearings up to 150 kg

The compact heater for serial production
The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation.

· For rolling bearings weighing up to 150 kg
· For workpieces with an inner diameter of 20 to 400 mm
· Fan cooling for continuous operation
· Particularly compact design - including the yokes weighing only 38 kg
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption
· Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy
· Automatic demagnetization
· Supplied with three yokes as standard
· Swivel arm including yoke adapter so that swivel arm can also be used with small yokes
· 3 year manufacturer warranty

Technical data for simatherm IH 090
Designation: Heater with cooling fan for continuous operation with small to medium workpieces
Voltage V / Hz / power:
- 400 V / 50 Hz / 6.4 kVA
- 440 – 480 V / 50–60 Hz / 7.4 kVA
- 575 V / 60 Hz / 9.2 kVA
Workpiece Maximum weight: 150kg
Bore diameter: From 20 mm inner diameter to 400 mm outer diameter
Temperature control:
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
 - Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Error guide codes: yes
Thermal overload protection: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard with LED-display
Size of the operating area (WxH): 145 x 205 mm
Coil diameter: 115 mm
Measurements (LxWxH): 420 x 280 x 420 mm
Overall weight including yokes: 38 kg
Number of standard yokes: 3
Standard yokes:
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm 
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm
Core cross-section: 55 x 55 mm
Yoke storage: yes, integrated
Cooling fan: standard
Swivel arm: yes
Housing material: aluminum

Scope of delivery
· 1x simatherm IH 090
· 1x User manual
· 1x Temperature probe
· 1x Power cord
· 1x Protective gloves
· 1x Swivel arm
· 1x Yoke adapter
· 1x Yoke 14x14 for bearings with bore diameter from 20 mm
· 1x Yoke 28x28 for bearings with bore diameter from 40 mm
· 1x Yoke 55x55 for bearings with bore diameter from 78 mm
Optional:
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm)


Industry target groups and applications
 
Fabrication and assembly 
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

Typical components which can be heated with the IH090 
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Induction Heater IH 090, 400-460V/50-60Hz; with fan Heat smaller to medium-sized rolling bearings up to 150 kg The compact heater for serial production The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation. · For rolling bearings weighing up to 150 kg · For workpieces with an inner diameter of 20 to 400 mm · Fan cooling for continuous operation · Particularly compact design - including the yokes weighing only 38 kg · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · Automatic demagnetization · Supplied with three yokes as standard · Swivel arm including yoke adapter so that swivel arm can also be used with small yokes · 3 year manufacturer warranty Technical data for simatherm IH 090 Designation: Heater with cooling fan for continuous operation with small to medium workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 6.4 kVA - 440 – 480 V / 50–60 Hz / 7.4 kVA - 575 V / 60 Hz / 9.2 kVA Workpiece Maximum weight: 150kg Bore diameter: From 20 mm inner diameter to 400 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal overload protection: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 145 x 205 mm Coil diameter: 115 mm Measurements (LxWxH): 420 x 280 x 420 mm Overall weight including yokes: 38 kg Number of standard yokes: 3 Standard yokes: - 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm - 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm - 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm Core cross-section: 55 x 55 mm Yoke storage: yes, integrated Cooling fan: standard Swivel arm: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 090 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Swivel arm · 1x Yoke adapter · 1x Yoke 14x14 for bearings with bore diameter from 20 mm · 1x Yoke 28x28 for bearings with bore diameter from 40 mm · 1x Yoke 55x55 for bearings with bore diameter from 78 mm Optional: · Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the IH090 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/BgvSA_6g~zSPhZMt2cO6sA.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 090, 400-460V/50-60Hz; with fan 
Heat smaller to medium-sized rolling bearings up to 150 kg 
 
The compact heater for serial production 
The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation. 
 
· For rolling bearings weighing up to 150 kg 
· For workpieces with an inner diameter of 20 to 400 mm 
· Fan cooling for continuous operation 
· Particularly compact design - including the yokes weighing only 38 kg 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· Automatic demagnetization 
· Supplied with three yokes as standard 
· Swivel arm including yoke adapter so that swivel arm can also be used with small yokes 
· 3 year manufacturer warranty 
 
<ins>Technical data for simatherm IH 090</ins> 
Designation: Heater with cooling fan for continuous operation with small to medium workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 6.4 kVA 
- 440 – 480 V / 50–60 Hz / 7.4 kVA 
- 575 V / 60 Hz / 9.2 kVA 
Workpiece Maximum weight: 150kg 
Bore diameter: From 20 mm inner diameter to 400 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
 - Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal overload protection: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 145 x 205 mm 
Coil diameter: 115 mm 
Measurements (LxWxH): 420 x 280 x 420 mm 
Overall weight including yokes: 38 kg 
Number of standard yokes: 3 
Standard yokes: 
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm 
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm 
Core cross-section: 55 x 55 mm 
Yoke storage: yes, integrated 
Cooling fan: standard 
Swivel arm: yes 
Housing material: aluminum 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 090 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Swivel arm 
· 1x Yoke adapter 
· 1x Yoke 14x14 for bearings with bore diameter from 20 mm 
· 1x Yoke 28x28 for bearings with bore diameter from 40 mm 
· 1x Yoke 55x55 for bearings with bore diameter from 78 mm 
Optional: 
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) 
 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
<ins>Typical components which can be heated with the IH090</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:b5kmc"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/BgvSA_6g~zSPhZMt2cO6sA.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="b5kmc" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 090 (up to 150kg)

simatherm bearing induction heater ih 090 (up 150kg) pemanas induksi bantalan (hingga machines mesin lainnya aruhan (sehingga lain-lain simatherm/西马瑟姆 轴承感应加热器 090（最大 150kg） 其他机器 西马瑟姆

simatherm-bearing-induction-heater-ih-090-up-to-150kg

simatool Bearing Handling Tool BHT 200-400 (max. lifting force 150 kg)
The safe solution for handling large and heavy bearings

The safe solution for handling medium, large and very large bearings
The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings.

The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control.

· Bearing bore remains free for mounting on shaft
· Mounting on shaft in horizontal and vertical position possible
· Avoidance of accident risk
· Can be used in combination with simatherm induction heaters
· TÜV SÜD certified


Scope of delivery 
· 2 carrying belts
· 2 high-quality handles
· 1 pair of protective gloves
· 2 turning handles for safe handling
· 2 steel clamping strips
· 2 inner race fasteners

Application areas of the BHT
· General manufacture and maintenance in plant and mechanical engineering
· Maintenance of agricultural, municipal and construction machinery
· Maintenance of electric motors
· Maintenance of pumps
· Gearbox maintenance
· Maintenance of conveyor technology
· Maintenance of paper and plastics processing

simatool Bearing Handling Tool BHT 200-400 (max. lifting force 150 kg) The safe solution for handling large and heavy bearingsThe safe solution for handling medium, large and very large bearings The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings.The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control. · Bearing bore remains free for mounting on shaft · Mounting on shaft in horizontal and vertical position possible · Avoidance of accident risk · Can be used in combination with simatherm induction heaters · TÜV SÜD certified Scope of delivery · 2 carrying belts · 2 high-quality handles · 1 pair of protective gloves · 2 turning handles for safe handling · 2 steel clamping strips · 2 inner race fasteners Application areas of the BHT · General manufacture and maintenance in plant and mechanical engineering · Maintenance of agricultural, municipal and construction machinery · Maintenance of electric motors · Maintenance of pumps · Gearbox maintenance · Maintenance of conveyor technology · Maintenance of paper and plastics processing*Lead time: 3 to 4 weeks upon order confirmation Applications images<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/euFSOMveuFIDnt~UPSwA87.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/CMCVGrRgmS5xcHcII~9QmF.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/XPhhfe4G~~Qmge0uEO2JJB.png" alt="Use with simatherm induction heater" /><figcaption class="md-block-image-caption">Use with simatherm induction heater</figcaption></figure>

simatool Bearing Handling Tool BHT 200-400 (max. lifting force 150 kg) 
The safe solution for handling large and heavy bearings
The safe solution for handling medium, large and very large bearings 
The Bearing Handling Tool is ideally suited for professionally and securely lifting large, heavy bearings.
The BHT reduces the risk of accidents and bearing damage. The BHT encloses the outer race of the bearing with a steel band. With two handles on opposite sides and two carrying belts, the bearing can be easily transported with a lifting crane. The bore remains open so the bearings can be easily placed onto a shaft. With the Bearing Handling Tool, bearings can be both horizontally and vertically fitted onto a shaft. Two anti-twist devices, which are fastened against the inner race, ensure that the inner race of the bearing does not turn out of control. 
 
· Bearing bore remains free for mounting on shaft 
· Mounting on shaft in horizontal and vertical position possible 
· Avoidance of accident risk 
· Can be used in combination with simatherm induction heaters 
· TÜV SÜD certified 
 
 
<ins>Scope of delivery </ins> 
· 2 carrying belts 
· 2 high-quality handles 
· 1 pair of protective gloves 
· 2 turning handles for safe handling 
· 2 steel clamping strips 
· 2 inner race fasteners 
 
<ins>Application areas of the BHT</ins> 
· General manufacture and maintenance in plant and mechanical engineering 
· Maintenance of agricultural, municipal and construction machinery 
· Maintenance of electric motors 
· Maintenance of pumps 
· Gearbox maintenance 
· Maintenance of conveyor technology 
· Maintenance of paper and plastics processing
*Lead time: 3 to 4 weeks upon order confirmation

<ins>Applications images</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:dqtni"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/euFSOMveuFIDnt~UPSwA87.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="dqtni" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:49tpt"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/CMCVGrRgmS5xcHcII~9QmF.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="49tpt" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:dshns"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/XPhhfe4G~~Qmge0uEO2JJB.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="dshns" 
 layout="nodisplay"></amp-image-lightbox>

Bearing Handling Tool 200-400 - (max. Lifting Force 150 Kg)

bearing handling tool 200-400 (max. lifting force 150 kg) alat penanganan (maks. gaya angkat tools lainnya simatool pengendalian galas daya alatan lain simatool/西马工具 轴承搬运工具 -（最大提升力 kg） 其他工具 西马工具

bearing-handling-tool-200-400-max-lifting-force-150-kg

 simatool Twin Puller TP 150

Professional dismounting of deep groove ball bearings and radial shaft seals
The simatool Twin Puller TP 150 can be used to expertly dismount deep groove ball bearings and radial shaft seals. Bearings with a tight fit on the inner or outer ring can be quickly and reliably dismounted with the help of this tool. The TP 150 can also be used to dismount shaft seals, thus making it a unique and professional dismounting tool.

· Three dismounting functions in one tool set: dismounting deep groove ball bearings with shaft, dismounting deep groove ball bearings without shaft, dismounting of radial shaft seals 

· Perfect complement to the well-proven simatool Fitting Tool FT 33 

· Suitable for shaft diameters from 10 to 100 mm and external diameters up to 150 mm 

· Compact toolset includes a selection table in a handy case 

· Case weight of 6.6 kg suitable for mobile use

Scope of delivery
· 6 sets of extraction arms (A1–A6)
· 2 threaded spindles (SW 19)
· 9 support washers (Ø 10–75 mm)
· Sliding hammer
· Extension for sliding hammer
· 50 tapping screws
· 10 spacer rings


refer to the technical data flyer on diagram explanation

Application areas of the TP 150
· General manufacture and maintenance in plant and mechanical engineering
· Maintenance of agricultural, municipal and construction machinery
· Maintenance of electric motors 
· Maintenance of pumps
· Gearbox maintenance
· Maintenance of conveyor technology
· Maintenance of paper and plastics processing

simatool Twin Puller TP 150 Professional dismounting of deep groove ball bearings and radial shaft seals The simatool Twin Puller TP 150 can be used to expertly dismount deep groove ball bearings and radial shaft seals. Bearings with a tight fit on the inner or outer ring can be quickly and reliably dismounted with the help of this tool. The TP 150 can also be used to dismount shaft seals, thus making it a unique and professional dismounting tool.· Three dismounting functions in one tool set: dismounting deep groove ball bearings with shaft, dismounting deep groove ball bearings without shaft, dismounting of radial shaft seals · Perfect complement to the well-proven simatool Fitting Tool FT 33 · All components are available as spare parts · Suitable for shaft diameters from 10 to 100 mm and external diameters up to 150 mm · Compact toolset includes a selection table in a handy case · Case weight of 6.6 kg suitable for mobile use Scope of delivery · 6 sets of extraction arms (A1–A6) · 2 threaded spindles (SW 19) · 9 support washers (Ø 10–75 mm) · Sliding hammer · Extension for sliding hammer · 50 tapping screws · 10 spacer rings <figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/uKW6mhidrFDxB35dLMd_Ir.webp" alt="refer to the technical data flyer on diagram explanation" /><figcaption class="md-block-image-caption">refer to the technical data flyer on diagram explanation</figcaption></figure>Application areas of the TP 150 · General manufacture and maintenance in plant and mechanical engineering · Maintenance of agricultural, municipal and construction machinery · Maintenance of electric motors · Maintenance of pumps · Gearbox maintenance · Maintenance of conveyor technology · Maintenance of paper and plastics processing*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/LuCcTWPSsWjGfrKbH37PzM.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

&nbsp;simatool Twin Puller TP 150 
 
<ins>Professional dismounting of deep groove ball bearings and radial shaft seals</ins> 
The simatool Twin Puller TP 150 can be used to expertly dismount deep groove ball bearings and radial shaft seals. Bearings with a tight fit on the inner or outer ring can be quickly and reliably dismounted with the help of this tool. The TP 150 can also be used to dismount shaft seals, thus making it a unique and professional dismounting tool.
· Three dismounting functions in one tool set: dismounting deep groove ball bearings with shaft, dismounting deep groove ball bearings without shaft, dismounting of radial shaft seals&nbsp;
· Perfect complement to the well-proven simatool Fitting Tool FT 33&nbsp;
· All components are available as spare parts&nbsp;
· Suitable for shaft diameters from 10 to 100 mm and external diameters up to 150 mm&nbsp;
· Compact toolset includes a selection table in a handy case&nbsp;
· Case weight of 6.6 kg suitable for mobile use 
 
<ins>Scope of delivery</ins> 
· 6 sets of extraction arms (A1–A6) 
· 2 threaded spindles (SW 19) 
· 9 support washers (Ø 10–75 mm) 
· Sliding hammer 
· Extension for sliding hammer 
· 50 tapping screws 
· 10 spacer rings 


 <div class="img-ctnr">
 <amp-img 
 on="tap:2gi3d"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/uKW6mhidrFDxB35dLMd_Ir.webp"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2gi3d" 
 layout="nodisplay"></amp-image-lightbox>

 
<ins>Application areas of the TP 150</ins> 
· General manufacture and maintenance in plant and mechanical engineering 
· Maintenance of agricultural, municipal and construction machinery 
· Maintenance of electric motors 
· Maintenance of pumps 
· Gearbox maintenance 
· Maintenance of conveyor technology 
· Maintenance of paper and plastics processing
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:19j53"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/LuCcTWPSsWjGfrKbH37PzM.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="19j53" 
 layout="nodisplay"></amp-image-lightbox>

Simatool & Simatherm Product Flyer

Twin Puller TP 150 (dismount Deep Groove Ball Bearings & Radial Shaft Seals)

twin puller tp 150 (dismount deep groove ball bearings radial shaft seals) (turun dari bearing seal) pullers penarik simatool berkembar (turunkan galas bebola alur dalam pengedap aci jejari) simatool/西马工具 双拉马 150（拆卸深沟球轴承和径向轴密封件） 拔轮器 西马工具

twin-puller-tp-150-dismount-deep-groove-ball-bearings-radial-shaft-seals

simatool Bearing Maintenance Kit MK 10-30
Easy and fast mounting and dismounting of bearings

The combination tool set for quick and easy mounting and dismounting of bearings
The MK 10-30 enables fast and precise installation of bearings with bore diameters of 10-30 mm as well as the extraction of deep groove ball bearings from shafts and from housings of the same series.

The tool set contains a multi-purpose installation tool suitable for the installation of bearings, sliding sleeves, sealing rings, tension rollers as well as similar products.

For extracting deep groove ball bearings from housings and shafts, the kit includes a three-arm puller. The combination of this extractor with a slide hammer and support washers allows easy removal of deep groove ball bearings from housings.

· The correct combination of impact ring and sleeves ensures that no mounting forces are transmitted via the rolling elements of the bearings, thus minimizing bearing damage due to incorrect mounting

· The impact rings are made of high-strength modified plastic. The impact sleeves are made of anodized aluminum, this is extremely robust, stable and very light

· A complete set of different sized extractor arms and spindles simplifies the dismounting of deep groove ball bearings

· Bearing dismounting from blind housings and from shafts possible

· All components are available as spare parts

· The extractor arms were specially developed for precise engagement in the raceways of the bearings. This results in an optimum hold and allows higher dismounting forces.

· The elastic retaining spring enables easy connection of the puller arms with the spindle

· All components are clearly arranged in the carrying case for quick selection

· Fast, precise mounting of bearings, seals, sliding sleeves and adapter sleeves

 
 Scope of delivery
· 21 impact rings
· 2 impact sleeves
· 1 non-rebound hammer
· 1 sliding hammer
· 2 spindles
· 5 sets of puller arms
· 7 support rings
· 1 counter bracket

· General manufacture and maintenance in plant and mechanical engineering
· Maintenance of scooters and motorcycle
· Service fleets for on-site maintenance
· Maintenance of electric motors 

simatool Bearing Maintenance Kit MK 10-30 Easy and fast mounting and dismounting of bearingsThe combination tool set for quick and easy mounting and dismounting of bearings The MK 10-30 enables fast and precise installation of bearings with bore diameters of 10-30 mm as well as the extraction of deep groove ball bearings from shafts and from housings of the same series.The tool set contains a multi-purpose installation tool suitable for the installation of bearings, sliding sleeves, sealing rings, tension rollers as well as similar products.For extracting deep groove ball bearings from housings and shafts, the kit includes a three-arm puller. The combination of this extractor with a slide hammer and support washers allows easy removal of deep groove ball bearings from housings.· The correct combination of impact ring and sleeves ensures that no mounting forces are transmitted via the rolling elements of the bearings, thus minimizing bearing damage due to incorrect mounting· The impact rings are made of high-strength modified plastic. The impact sleeves are made of anodized aluminum, this is extremely robust, stable and very light· A complete set of different sized extractor arms and spindles simplifies the dismounting of deep groove ball bearings· Bearing dismounting from blind housings and from shafts possible· All components are available as spare parts· The extractor arms were specially developed for precise engagement in the raceways of the bearings. This results in an optimum hold and allows higher dismounting forces.· The elastic retaining spring enables easy connection of the puller arms with the spindle· All components are clearly arranged in the carrying case for quick selection· Fast, precise mounting of bearings, seals, sliding sleeves and adapter sleeves Scope of delivery · 21 impact rings · 2 impact sleeves · 1 non-rebound hammer · 1 sliding hammer · 2 spindles · 5 sets of puller arms · 7 support rings · 1 counter bracketApplication areas of the MK 10-30· General manufacture and maintenance in plant and mechanical engineering · Maintenance of scooters and motorcycle · Service fleets for on-site maintenance · Maintenance of electric motors Lead time: 3 to 4 weeks upon order confirmation

simatool Bearing Maintenance Kit MK 10-30 
Easy and fast mounting and dismounting of bearings
The combination tool set for quick and easy mounting and dismounting of bearings 
The MK 10-30 enables fast and precise installation of bearings with bore diameters of 10-30 mm as well as the extraction of deep groove ball bearings from shafts and from housings of the same series.
The tool set contains a multi-purpose installation tool suitable for the installation of bearings, sliding sleeves, sealing rings, tension rollers as well as similar products.
For extracting deep groove ball bearings from housings and shafts, the kit includes a three-arm puller. The combination of this extractor with a slide hammer and support washers allows easy removal of deep groove ball bearings from housings.
· The correct combination of impact ring and sleeves ensures that no mounting forces are transmitted via the rolling elements of the bearings, thus minimizing bearing damage due to incorrect mounting
· The impact rings are made of high-strength modified plastic. The impact sleeves are made of anodized aluminum, this is extremely robust, stable and very light
· A complete set of different sized extractor arms and spindles simplifies the dismounting of deep groove ball bearings
· Bearing dismounting from blind housings and from shafts possible
· All components are available as spare parts
· The extractor arms were specially developed for precise engagement in the raceways of the bearings. This results in an optimum hold and allows higher dismounting forces.
· The elastic retaining spring enables easy connection of the puller arms with the spindle
· All components are clearly arranged in the carrying case for quick selection
· Fast, precise mounting of bearings, seals, sliding sleeves and adapter sleeves
&nbsp; 
 <ins>Scope of delivery 
</ins>· 21 impact rings 
· 2 impact sleeves 
· 1 non-rebound hammer 
· 1 sliding hammer 
· 2 spindles 
· 5 sets of puller arms 
· 7 support rings 
· 1 counter bracket
<ins>Application areas of the MK 10-30</ins>
· General manufacture and maintenance in plant and mechanical engineering 
· Maintenance of scooters and motorcycle 
· Service fleets for on-site maintenance 
· Maintenance of electric motors&nbsp;
Lead time: 3 to 4 weeks upon order confirmation

Bearing Maintenance Kit MK 10-30 (mounting and Dismounting of Bearings)

bearing maintenance kit mk 10-30 (mounting dismounting bearings) perawatan (pemasangan dan pelepasan bearing) tools alat lainnya simatool penyelenggaraan galas (memasang melepaskan galas) alatan lain simatool/西马工具 轴承维护套件 10-30（轴承的安装和拆卸） 其他工具 西马工具

bearing-maintenance-kit-mk-10-30-mounting-and-dismounting-of-bearings

Electric hot plate with thermostat controlled bearing heating.  

Electric heating plate with temperature control
The electric heating plates with thermostat-controlled heating are especially suitable for small bearings and machine parts. The temperature can be continuously adjusted between 50 °C and 200 °C on the controller.
 
· HPS for workpieces weighing up to 5 kg
· Designed to heat multiple workpieces simultaneously
· Flat heating surface for gentle and uniform heating of the bearing
· Also suitable for heating non-ferritic workpieces such as aluminum or brass
· Available for voltages of 100–115 and 230V
· Control range from 50 to 200 °C
· 3 years manufacturer warranty
· The cover prevents contamination of the workpieces during heating. In addition, the workpieces are heated quicker when the cover is closed.

Application areas
· General manufacture and maintenance in plant and mechanical engineering
· Maintenance and repair shops
· Maintenance of agricultural, municipal and construction machinery
· Maintenance of gearboxes
· Maintenance of electric motors

Technical Data for Hot Plate HPS
Designation: Heaters for small workpieces
Voltage V / Hz: 220 – 240 V / 50 – 60 Hz OR 100 – 120 V / 50 – 60 Hz
Workpiece - Maximum weight: HPS 5 kg
Temperature control: Range 50 – 200°C
Accuracy (electronic): ± 5°C
Maximum temperature (approx.): 200°C
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Control panel: Main switch, temperature control
Size of the operating surface (LxW): 380 x 180 mm 
Measurements (LxWxH): HPS 390 x 190 x 150 mm
Overall weight: HPS 6 kg
Maximum power consumption: HPS 1.0 kVA and HPL 2.0 kVA

Scope of delivery
· 1x HPS 
· 1x Protective gloves
· 1x User manual
· 1x Power cord

Electric hot plate with thermostat controlled bearing heating. Electric heating plate with temperature control The electric heating plates with thermostat-controlled heating are especially suitable for small bearings and machine parts. The temperature can be continuously adjusted between 50 °C and 200 °C on the controller. · HPS for workpieces weighing up to 5 kg · Designed to heat multiple workpieces simultaneously · Flat heating surface for gentle and uniform heating of the bearing · Also suitable for heating non-ferritic workpieces such as aluminum or brass · Available for voltages of 100–115 and 230V · Control range from 50 to 200 °C · 3 years manufacturer warranty · The cover prevents contamination of the workpieces during heating. In addition, the workpieces are heated quicker when the cover is closed. Application areas · General manufacture and maintenance in plant and mechanical engineering · Maintenance and repair shops · Maintenance of agricultural, municipal and construction machinery · Maintenance of gearboxes · Maintenance of electric motors Technical Data for Hot Plate HPS Designation: Heaters for small workpieces Voltage V / Hz: 220 – 240 V / 50 – 60 Hz OR 100 – 120 V / 50 – 60 Hz Workpiece - Maximum weight: HPS 5 kg Temperature control: Range 50 – 200°C Accuracy (electronic): ± 5°C Maximum temperature (approx.): 200°C Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Control panel: Main switch, temperature control Size of the operating surface (LxW): 380 x 180 mm Measurements (LxWxH): HPS 390 x 190 x 150 mm Overall weight: HPS 6 kg Maximum power consumption: HPS 1.0 kVA and HPL 2.0 kVA Scope of delivery · 1x HPS · 1x Protective gloves · 1x User manual · 1x Power cord*Lead time: 3 to 4 weeks upon order confirmation

Electric hot plate with thermostat controlled bearing heating.&nbsp;&nbsp;
Electric heating plate with temperature control 
The electric heating plates with thermostat-controlled heating are especially suitable for small bearings and machine parts. The temperature can be continuously adjusted between 50 °C and 200 °C on the controller. 
 
· HPS for workpieces weighing up to 5 kg 
· Designed to heat multiple workpieces simultaneously 
· Flat heating surface for gentle and uniform heating of the bearing 
· Also suitable for heating non-ferritic workpieces such as aluminum or brass 
· Available for voltages of 100–115 and 230V 
· Control range from 50 to 200 °C 
· 3 years manufacturer warranty 
· The cover prevents contamination of the workpieces during heating. In addition, the workpieces are heated quicker when the cover is closed. 
 
<ins>Application areas</ins> 
· General manufacture and maintenance in plant and mechanical engineering 
· Maintenance and repair shops 
· Maintenance of agricultural, municipal and construction machinery 
· Maintenance of gearboxes 
· Maintenance of electric motors 
 
<ins>Technical Data for Hot Plate HPS</ins> 
Designation: Heaters for small workpieces 
Voltage V / Hz: 220 – 240 V / 50 – 60 Hz OR 100 – 120 V / 50 – 60 Hz 
Workpiece - Maximum weight: HPS 5 kg 
Temperature control: Range 50 – 200°C 
Accuracy (electronic): ± 5°C 
Maximum temperature (approx.): 200°C 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Control panel: Main switch, temperature control 
Size of the operating surface (LxW): 380 x 180 mm 
Measurements (LxWxH): HPS 390 x 190 x 150 mm 
Overall weight: HPS 6 kg 
Maximum power consumption: HPS 1.0 kVA and HPL 2.0 kVA 
 
<ins>Scope of delivery</ins> 
· 1x HPS 
· 1x Protective gloves 
· 1x User manual 
· 1x Power cord
*Lead time: 3 to 4 weeks upon order confirmation

Simatherm & simatool product catalog

Simatherm - Bearing Electric Heating Hot Plate Small

simatherm bearing electric heating hot plate small bantalan pemanas listrik kecil machines mesin lainnya lain-lain simatherm/西马瑟姆 小型轴承电加热板 其他机器 西马瑟姆

simatherm-bearing-electric-heating-hot-plate-small

 Electric hot plate with thermostat-controlled bearing heating.  

Electric heating plate with temperature control
The electric heating plates with thermostat-controlled heating are especially suitable for small bearings and machine parts. The temperature can be continuously adjusted between 50 °C and 200 °C on the controller.
 
· HPL for workpieces weighing up to 10 kg
· Designed to heat multiple workpieces simultaneously
· Flat heating surface for gentle and uniform heating of the bearing
· Also suitable for heating non-ferritic workpieces such as aluminum or brass
· Available for voltages of 100–115 and 230V
· Control range from 50 to 200 °C
· 3 years manufacturer warranty
· The cover prevents contamination of the workpieces during heating. In addition, the workpieces are heated quicker when the cover is closed.

Application areas
· General manufacture and maintenance in plant and mechanical engineering
· Maintenance and repair shops
· Maintenance of agricultural, municipal and construction machinery
· Maintenance of gearboxes
· Maintenance of electric motors

Technical Data for Hot Plate HPL
Designation: Heaters for small workpieces
Voltage V / Hz: 220 – 240 V / 50 – 60 Hz OR 100 – 120 V / 50 – 60 Hz
Workpiece - Maximum weight: HPL 10kg
Temperature control: Range 50 – 200°C
Accuracy (electronic): ± 5°C
Maximum temperature (approx.): 200°C
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Control panel: Main switch, temperature control
Size of the operating surface (LxW): 380 x 380 mm 
Measurements (LxWxH): HPL 390 x 390 x 170 mm
Overall weight: HPL: 10 kg
Maximum power consumption: HPS 1.0 kVA and HPL 2.0 kVA

Scope of delivery
· 1x HPL 
· 1x Protective gloves
· 1x User manual
· 1x Power cord

Electric hot plate with thermostat-controlled bearing heating. Electric heating plate with temperature control The electric heating plates with thermostat-controlled heating are especially suitable for small bearings and machine parts. The temperature can be continuously adjusted between 50 °C and 200 °C on the controller. · HPL for workpieces weighing up to 10 kg · Designed to heat multiple workpieces simultaneously · Flat heating surface for gentle and uniform heating of the bearing · Also suitable for heating non-ferritic workpieces such as aluminum or brass · Available for voltages of 100–115 and 230V · Control range from 50 to 200 °C · 3 years manufacturer warranty · The cover prevents contamination of the workpieces during heating. In addition, the workpieces are heated quicker when the cover is closed. Application areas · General manufacture and maintenance in plant and mechanical engineering · Maintenance and repair shops · Maintenance of agricultural, municipal and construction machinery · Maintenance of gearboxes · Maintenance of electric motors Technical Data for Hot Plate HPL Designation: Heaters for small workpieces Voltage V / Hz: 220 – 240 V / 50 – 60 Hz OR 100 – 120 V / 50 – 60 Hz Workpiece - Maximum weight: HPL 10kg Temperature control: Range 50 – 200°C Accuracy (electronic): ± 5°C Maximum temperature (approx.): 200°C Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Control panel: Main switch, temperature control Size of the operating surface (LxW): 380 x 380 mm Measurements (LxWxH): HPL 390 x 390 x 170 mm Overall weight: HPL: 10 kg Maximum power consumption: HPS 1.0 kVA and HPL 2.0 kVA Scope of delivery · 1x HPL · 1x Protective gloves · 1x User manual · 1x Power cord*Lead time: 3 to 4 weeks upon order confirmation

&nbsp;Electric hot plate with thermostat-controlled bearing heating.&nbsp;&nbsp;
Electric heating plate with temperature control 
The electric heating plates with thermostat-controlled heating are especially suitable for small bearings and machine parts. The temperature can be continuously adjusted between 50 °C and 200 °C on the controller. 
 
· HPL for workpieces weighing up to 10 kg 
· Designed to heat multiple workpieces simultaneously 
· Flat heating surface for gentle and uniform heating of the bearing 
· Also suitable for heating non-ferritic workpieces such as aluminum or brass 
· Available for voltages of 100–115 and 230V 
· Control range from 50 to 200 °C 
· 3 years manufacturer warranty 
· The cover prevents contamination of the workpieces during heating. In addition, the workpieces are heated quicker when the cover is closed. 
 
<ins>Application areas</ins> 
· General manufacture and maintenance in plant and mechanical engineering 
· Maintenance and repair shops 
· Maintenance of agricultural, municipal and construction machinery 
· Maintenance of gearboxes 
· Maintenance of electric motors 
 
<ins>Technical Data for Hot Plate HPL</ins> 
Designation: Heaters for small workpieces 
Voltage V / Hz: 220 – 240 V / 50 – 60 Hz OR 100 – 120 V / 50 – 60 Hz 
Workpiece - Maximum weight: HPL 10kg 
Temperature control: Range 50 – 200°C 
Accuracy (electronic): ± 5°C 
Maximum temperature (approx.): 200°C 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Control panel: Main switch, temperature control 
Size of the operating surface (LxW): 380 x 380 mm 
Measurements (LxWxH): HPL 390 x 390 x 170 mm 
Overall weight: HPL: 10 kg 
Maximum power consumption: HPS 1.0 kVA and HPL 2.0 kVA 
 
<ins>Scope of delivery</ins> 
· 1x HPL 
· 1x Protective gloves 
· 1x User manual 
· 1x Power cord
*Lead time: 3 to 4 weeks upon order confirmation

Simatherm - Bearing Electric Heating Hot Plate Large

simatherm bearing electric heating hot plate large bantalan pemanas listrik besar machines mesin lainnya elektrik lain-lain simatherm/西马瑟姆 大型轴承电加热板 其他机器 西马瑟姆

simatherm-bearing-electric-heating-hot-plate-large

simatherm Induction Heater IH 045
Heat the most common rolling bearings up to 45 kg

World's first controllable induction heater with an app
The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required.

· Connectivity with the "simatec World of Maintenance" app
· Remote control
· For rolling bearings weighing up to 45 kg
· For workpieces with an inner diameter of 20 to 310 mm
· Available for voltages of 100, 115 and 230 V
· 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy
· Extendable bearing support arms
· Smallest and fastest device in its performance class
· Smallest external induction coil
· Supplied with three yokes as standard
· Particularly compact design - including the yokes only 17 kg in weight
· 3 year manufacturer warranty
· Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· Automatic demagnetization

Technical data for simatherm IH 045
Designation: Heater for the most common rolling bearings
Voltage V / Hz / power:
- 100 V / 50 – 60 Hz / 1.5 kVA
- 110 – 120 V / 50 – 60 Hz / 1.7 kVA
- 220 – 240 V / 50 – 60 Hz / 2.1 kVA
Workpiece Maximum weight: 45kg
Bore diameter: From 20 mm inner diameter to 310 mm outer diameter
Temperature control:
- Range: 20 – 180°C
- Magnetic probe: Type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
- Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 180 °C
Thermometer mode: yes
Two-sensor technology: yes
Bearing temperature mode: yes
Power level: 8 levels / 10-20-30-40-50-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Suitability for precision bearings: yes
Thermal overload protection: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard wtih LED-display or remote control via app
Size of the operating area (WxH): 114 x 160 mm
Coil diameter: 89 mm
Measurements (LxWxH): 320 x 267 x 293 mm
Overall weight including yokes: 17 kg
Number of standard yokes: 3
Standard yokes:
- 42.5 x 42.5 x 219 mm for bearings with a bore diameter of at least 60 mm
- 28 x 28 x 219 mm for bearings with a bore diameter of at least 40 mm
- 14 x 14 x 219 mm for bearings with a bore diameter of at least 20 mm
Core cross-section: 42.5 x 42.5 mm
Yoke storage: yes, integrated
Housing material: plastic
Error guide codes: yes; error messages in text form visible in the app

Scope of delivery
· 1x simatherm IH 045
· 1x Quick instruction guide
· 1x Temperature probe
· 1x Protective gloves
· 1x Power cord
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm
· 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm

Optional:
· Second temperature probe needed to use two-sensor technology

Industry target groups and applications

Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

Typical components which can be heated with the IH 045
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

remote control via "world of maintanenace" app

simatherm Induction Heater IH 045 Heat the most common rolling bearings up to 45 kg World&#x27;s first controllable induction heater with an app The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required. · Connectivity with the &quot;simatec World of Maintenance&quot; app · Remote control · For rolling bearings weighing up to 45 kg · For workpieces with an inner diameter of 20 to 310 mm · Available for voltages of 100, 115 and 230 V · 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy · Extendable bearing support arms · Smallest and fastest device in its performance class · Smallest external induction coil · Supplied with three yokes as standard · Particularly compact design - including the yokes only 17 kg in weight · 3 year manufacturer warranty · Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · Automatic demagnetization Technical data for simatherm IH 045 Designation: Heater for the most common rolling bearings Voltage V / Hz / power: - 100 V / 50 – 60 Hz / 1.5 kVA - 110 – 120 V / 50 – 60 Hz / 1.7 kVA - 220 – 240 V / 50 – 60 Hz / 2.1 kVA Workpiece Maximum weight: 45kg Bore diameter: From 20 mm inner diameter to 310 mm outer diameter Temperature control: - Range: 20 – 180°C - Magnetic probe: Type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 180 °C Thermometer mode: yes Two-sensor technology: yes Bearing temperature mode: yes Power level: 8 levels / 10-20-30-40-50-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Suitability for precision bearings: yes Thermal overload protection: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard wtih LED-display or remote control via app Size of the operating area (WxH): 114 x 160 mm Coil diameter: 89 mm Measurements (LxWxH): 320 x 267 x 293 mm Overall weight including yokes: 17 kg Number of standard yokes: 3 Standard yokes: - 42.5 x 42.5 x 219 mm for bearings with a bore diameter of at least 60 mm - 28 x 28 x 219 mm for bearings with a bore diameter of at least 40 mm - 14 x 14 x 219 mm for bearings with a bore diameter of at least 20 mm Core cross-section: 42.5 x 42.5 mm Yoke storage: yes, integrated Housing material: plastic Error guide codes: yes; error messages in text form visible in the app Scope of delivery · 1x simatherm IH 045 · 1x Quick instruction guide · 1x Temperature probe · 1x Protective gloves · 1x Power cord · 1x Yoke 14x14 for bearings with a bore diameter from 20 mm · 1x Yoke 28x28 for bearings with a bore diameter from 40 mm · 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm Optional: · Second temperature probe needed to use two-sensor technology Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the IH 045 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/Dvvje7J4uiAlXV1cxs9W1m.jpg" alt="remote control via "world of maintanenace" app" /><figcaption class="md-block-image-caption">remote control via &quot;world of maintanenace&quot; app</figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Y8nTQWUbh2CHAPfZUy10t4.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/8ahOmpNppatDGixSwvwT_N.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 045 
Heat the most common rolling bearings up to 45 kg 
 
World's first controllable induction heater with an app 
The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required. 
 
· Connectivity with the "simatec World of Maintenance" app 
· Remote control 
· For rolling bearings weighing up to 45 kg 
· For workpieces with an inner diameter of 20 to 310 mm 
· Available for voltages of 100, 115 and 230 V 
· 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy 
· Extendable bearing support arms 
· Smallest and fastest device in its performance class 
· Smallest external induction coil 
· Supplied with three yokes as standard 
· Particularly compact design - including the yokes only 17 kg in weight 
· 3 year manufacturer warranty 
· Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· Automatic demagnetization 
 
<ins>Technical data for simatherm IH 045</ins> 
Designation: Heater for the most common rolling bearings 
Voltage V / Hz / power: 
- 100 V / 50 – 60 Hz / 1.5 kVA 
- 110 – 120 V / 50 – 60 Hz / 1.7 kVA 
- 220 – 240 V / 50 – 60 Hz / 2.1 kVA 
Workpiece Maximum weight: 45kg 
Bore diameter: From 20 mm inner diameter to 310 mm outer diameter 
Temperature control: 
- Range: 20 – 180°C 
- Magnetic probe: Type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 180 °C 
Thermometer mode: yes 
Two-sensor technology: yes 
Bearing temperature mode: yes 
Power level: 8 levels / 10-20-30-40-50-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Suitability for precision bearings: yes 
Thermal overload protection: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard wtih LED-display or remote control via app 
Size of the operating area (WxH): 114 x 160 mm 
Coil diameter: 89 mm 
Measurements (LxWxH): 320 x 267 x 293 mm 
Overall weight including yokes: 17 kg 
Number of standard yokes: 3 
Standard yokes: 
- 42.5 x 42.5 x 219 mm for bearings with a bore diameter of at least 60 mm 
- 28 x 28 x 219 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 219 mm for bearings with a bore diameter of at least 20 mm 
Core cross-section: 42.5 x 42.5 mm 
Yoke storage: yes, integrated 
Housing material: plastic 
Error guide codes: yes; error messages in text form visible in the app 
 
Scope of delivery 
· 1x simatherm IH 045 
· 1x Quick instruction guide 
· 1x Temperature probe 
· 1x Protective gloves 
· 1x Power cord 
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm 
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm 
· 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm 
 
Optional: 
· Second temperature probe needed to use two-sensor technology 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
<ins>Typical components which can be heated with the IH 045</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:3i1pj"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Dvvje7J4uiAlXV1cxs9W1m.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="3i1pj" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:5vtg4"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Y8nTQWUbh2CHAPfZUy10t4.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5vtg4" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:c57dp"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/8ahOmpNppatDGixSwvwT_N.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="c57dp" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 045 With Remote App Control (up to 45kg)

simatherm bearing induction heater ih 045 remote app control (up 45kg) pemanas induksi bantalan dengan kontrol aplikasi jarak jauh (hingga machines mesin lainnya aruhan kawalan (sehingga lain-lain simatherm/西马瑟姆 轴承感应加热器 带远程应用程序控制（最多 45 公斤） 其他机器 西马瑟姆

simatherm-bearing-induction-heater-ih-045-with-remote-app-control-up-to-45kg

  * Lead time: 3 to 4 weeks upon order confirmation

Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. 

· unlimited range of uses in any location, confined and hard-to-reach spaces

· freely selectable dispensing cycle of 1 to 12 months

· IP68 certified and EX certified for all zones

· environmental sustainability, easy disposal at the end of the dispensing cycle

· simalube can be refilled up to 3 times 

· No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance

Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). 

· ventilation system (HVAC Heating, ventilation, and air-conditioning)

simalube attached with brush, lubricating and cleaning chains at one-go 

Keep your equipment running smoothly and extend its lifespan with Simalube 250ml Automatic Lubricator. Order now and experience improved efficiency and reduced operational hassles.

* Lead time: 3 to 4 weeks upon order confirmationEnhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 250ML Automatic Lubricator:· unlimited range of uses in any location, confined and hard-to-reach spaces· freely selectable dispensing cycle of 1 to 12 months· IP68 certified and EX certified for all zones· environmental sustainability, easy disposal at the end of the dispensing cycle· simalube can be refilled up to 3 times · No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performanceEasy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of simalube single-point lubricators:· pump· motor engine· rolling bearings· chains· conveyor belts· gears· lifting systems· linear/sliding guides· threaded spindles· ventilation system (HVAC Heating, ventilation, and air-conditioning)<figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/7U~hMOvH0CLeDkqnoaSTJf.jpg" alt="simalube attached with brush, lubricating and cleaning chains at one-go " /><figcaption class="md-block-image-caption">simalube attached with brush, lubricating and cleaning chains at one-go </figcaption></figure>Keep your equipment running smoothly and extend its lifespan with Simalube 250ml Automatic Lubricator. Order now and experience improved efficiency and reduced operational hassles.

&nbsp;&nbsp;* Lead time: 3 to 4 weeks upon order confirmation
Enhance the performance and durability of your rotating machinery components with the Simalube 250ml Automatic Lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.&nbsp;
<ins>Simalube 250ML Automatic Lubricator:</ins>
· unlimited range of uses in any location, confined and hard-to-reach spaces
· freely selectable dispensing cycle of 1 to 12 months
· IP68 certified and EX certified for all zones
· environmental sustainability, easy disposal at the end of the dispensing cycle
· simalube can be refilled up to 3 times&nbsp;
· No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance
Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX).&nbsp;
<ins>Applications of simalube single-point lubricators:</ins>
· pump
· motor engine
· rolling bearings
· chains
· conveyor belts
· gears
· lifting systems
· linear/sliding guides
· threaded spindles
· ventilation system (HVAC Heating, ventilation, and air-conditioning)

 <div class="img-ctnr">
 <amp-img 
 on="tap:ceejv"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/7U~hMOvH0CLeDkqnoaSTJf.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="ceejv" 
 layout="nodisplay"></amp-image-lightbox>

 
Keep your equipment running smoothly and extend its lifespan with Simalube 250ml Automatic Lubricator. Order now and experience improved efficiency and reduced operational hassles.

Simalube Automatic Lubricator Product Catalog & Spec Sheet

Simalube 250ml Automatic Single-Point Lubricator

simalube 250ml automatic single-point lubricator pelumas titik tunggal otomatis lubricants pelincir automatik simalube/西马鲁贝 自动单点润滑器 润滑剂 西马鲁贝

simalube-250ml-automatic-single-point-lubricator

simalube 250ml empty for self-filling with grease

simalube 250ml empty for self-filling with oil

simalube 250ml with multipurpose grease

simalube 250ml with food industry grease

simalube 250ml with chain oil

Lubricator Type:

simatherm Induction Heater IH 070, 230V/50-60Hz
Heat small to medium-sized rolling bearings up to 120 kg

The popular all-round heater for flexible use
The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.

· For rolling bearings weighing up to 120 kg
· For workpieces with an inner diameter of 20 to 400 mm
· Swivel arm available as an option
· 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy
· Supplied with three yokes as standard
· Particularly compact design - including the yokes only 35 kg in weight
· 3 year manufacturer warranty
· Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· Automatic demagnetization


Technical data for simatherm IH 070
Designation: Heater for small to medium workpieces
Voltage V / Hz / power:
- 100 V / 50 – 60 Hz / 1.5 kVA
- 110 – 120 V / 60 Hz / 3.7 kVA
- 220 – 240 V / 50 – 60 Hz / 3.7 kVA
Workpiece:
- Maximum weight: 120 kg
- Bore diameter: From 20 mm inner diameter to 400 mm outer diameter
Temperature control: 
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
Range: 0 – 60 minutes
Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Suitability for precision bearings: yes
Error guide codes: yes
Thermal overload protection: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard wtih LED-display
Size of the operating area (WxH): 145 x 205 mm
Coil diameter: 115 mm
Measurements (LxWxH): 420 x 280 x 345 mm
Overall weight including yokes: 35 kg
Number of standard yokes: 3
Standard yokes:
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm
Core cross-section: 55 x 55 mm
Yoke storage: yes, integrated
Swivel arm: optional
Housing material: aluminum


Scope of delivery
· 1x simatherm IH 070
· 1x User manual
· 1x Temperature probe
· 1x Protective gloves
· 1x Power cord
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm
· 1x Yoke 55x55 for bearings with a bore diameter from 78 mm

Optional:
· Swivel arm
· Yoke adapter
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm)


Industry target groups and applications

Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

Typical components which can be heated with the IH 070
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Induction Heater IH 070, 230V/50-60Hz Heat small to medium-sized rolling bearings up to 120 kg The popular all-round heater for flexible use The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.· For rolling bearings weighing up to 120 kg · For workpieces with an inner diameter of 20 to 400 mm · Swivel arm available as an option · 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy · Supplied with three yokes as standard · Particularly compact design - including the yokes only 35 kg in weight · 3 year manufacturer warranty · Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · Automatic demagnetization Technical data for simatherm IH 070 Designation: Heater for small to medium workpieces Voltage V / Hz / power: - 100 V / 50 – 60 Hz / 1.5 kVA - 110 – 120 V / 60 Hz / 3.7 kVA - 220 – 240 V / 50 – 60 Hz / 3.7 kVA Workpiece: - Maximum weight: 120 kg - Bore diameter: From 20 mm inner diameter to 400 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: Range: 0 – 60 minutes Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Suitability for precision bearings: yes Error guide codes: yes Thermal overload protection: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard wtih LED-display Size of the operating area (WxH): 145 x 205 mm Coil diameter: 115 mm Measurements (LxWxH): 420 x 280 x 345 mm Overall weight including yokes: 35 kg Number of standard yokes: 3 Standard yokes: - 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm - 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm - 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm Core cross-section: 55 x 55 mm Yoke storage: yes, integrated Swivel arm: optional Housing material: aluminum Scope of delivery · 1x simatherm IH 070 · 1x User manual · 1x Temperature probe · 1x Protective gloves · 1x Power cord · 1x Yoke 14x14 for bearings with a bore diameter from 20 mm · 1x Yoke 28x28 for bearings with a bore diameter from 40 mm · 1x Yoke 55x55 for bearings with a bore diameter from 78 mm Optional: · Swivel arm · Yoke adapter · Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the IH 070 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Ljsca2TLbC8PlDdp0lZA3_.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/V59TT11LP0Di3MYHBcNCp4.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 070, 230V/50-60Hz 
Heat small to medium-sized rolling bearings up to 120 kg 
 
The popular all-round heater for flexible use 
The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.
· For rolling bearings weighing up to 120 kg 
· For workpieces with an inner diameter of 20 to 400 mm 
· Swivel arm available as an option 
· 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy 
· Supplied with three yokes as standard 
· Particularly compact design - including the yokes only 35 kg in weight 
· 3 year manufacturer warranty 
· Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· Automatic demagnetization 
 
 
<ins>Technical data for simatherm IH 070</ins> 
Designation: Heater for small to medium workpieces 
Voltage V / Hz / power: 
- 100 V / 50 – 60 Hz / 1.5 kVA 
- 110 – 120 V / 60 Hz / 3.7 kVA 
- 220 – 240 V / 50 – 60 Hz / 3.7 kVA 
Workpiece: 
- Maximum weight: 120 kg 
- Bore diameter: From 20 mm inner diameter to 400 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
Range: 0 – 60 minutes 
Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Suitability for precision bearings: yes 
Error guide codes: yes 
Thermal overload protection: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard wtih LED-display 
Size of the operating area (WxH): 145 x 205 mm 
Coil diameter: 115 mm 
Measurements (LxWxH): 420 x 280 x 345 mm 
Overall weight including yokes: 35 kg 
Number of standard yokes: 3 
Standard yokes: 
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm 
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm 
Core cross-section: 55 x 55 mm 
Yoke storage: yes, integrated 
Swivel arm: optional 
Housing material: aluminum 
 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 070 
· 1x User manual 
· 1x Temperature probe 
· 1x Protective gloves 
· 1x Power cord 
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm 
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm 
· 1x Yoke 55x55 for bearings with a bore diameter from 78 mm 
 
Optional: 
· Swivel arm 
· Yoke adapter 
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) 
 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
<ins>Typical components which can be heated with the IH 070</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:eufju"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Ljsca2TLbC8PlDdp0lZA3_.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="eufju" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:ee0am"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/V59TT11LP0Di3MYHBcNCp4.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="ee0am" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 070 (up to 120kg)

simatherm bearing induction heater ih 070 (up 120kg) pemanas induksi bantalan (hingga machines mesin lainnya aruhan galas (sehingga lain-lain simatherm/西马瑟姆 轴承感应加热器 070（最大 120kg） 其他机器 西马瑟姆

simatherm-bearing-induction-heater-ih-070-up-to-120kg

* Lead time: 3 to 4 weeks upon order confirmation

* Lead time: 3 to 4 weeks upon order confirmationEnhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator. Its compact size makes it unique in the global market as the smallest automatic lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs. Simalube 15ML Automatic Lubricator:· unlimited range of uses in any location, confined and hard-to-reach spaces· freely selectable dispensing cycle of 1 to 12 months· IP68 certified and EX certified for all zones· environmental sustainability, easy disposal at the end of the dispensing cycle· simalube can be refilled up to 3 times · No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performanceEasy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX). Applications of simalube single-point lubricators:· pump· motor engine· rolling bearings· chains· conveyor belts· gears· lifting systems· linear/sliding guides· threaded spindlers· ventilation system (HVAC Heating, ventilation, and air-conditioning)<figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/Bm4EBOoUAv0hFqJCm~Jb71.jpg" alt="simalube attached with brush to lubricate and clean the conveyor belts and chains while lubricating it." /><figcaption class="md-block-image-caption">simalube attached with brush to lubricate and clean the conveyor belts and chains while lubricating it.</figcaption></figure>Keep your equipment running smoothly and extend its lifespan with Simalube 15ml Automatic Lubricator. Order now and experience improved efficiency and reduced operational hassles.

* Lead time: 3 to 4 weeks upon order confirmation
Enhance the performance and durability of your rotating machinery components with the Simalube 15ml Automatic Lubricator. Its compact size makes it unique in the global market as the smallest automatic lubricator. It ensures continuous and precise lubrication, reducing downtime and maintenance costs.&nbsp;
<ins>Simalube 15ML Automatic Lubricator:</ins>
· unlimited range of uses in any location, confined and hard-to-reach spaces
· freely selectable dispensing cycle of 1 to 12 months
· IP68 certified and EX certified for all zones
· environmental sustainability, easy disposal at the end of the dispensing cycle
· simalube can be refilled up to 3 times&nbsp;
· No more manual lubrication that resulted in under-lubrication or over-lubrication with less machine downtime and an increase in machine performance
Easy installation and cost-saving solution suitable for a wide range of industries. The simalube automatic lubrication system is used in a wide variety of applications. The lubricant dispensers are available with a wide standard range of greases and oils and can be used both under water and in potentially explosive areas (ATEX).&nbsp;
<ins>Applications of simalube single-point lubricators:</ins>
· pump
· motor engine
· rolling bearings
· chains
· conveyor belts
· gears
· lifting systems
· linear/sliding guides
· threaded spindlers
· ventilation system (HVAC Heating, ventilation, and air-conditioning)

 <div class="img-ctnr">
 <amp-img 
 on="tap:98aq9"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Bm4EBOoUAv0hFqJCm~Jb71.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="98aq9" 
 layout="nodisplay"></amp-image-lightbox>

 
Keep your equipment running smoothly and extend its lifespan with Simalube 15ml Automatic Lubricator. Order now and experience improved efficiency and reduced operational hassles.