KOYO

SCHNEIDER ELECTRIC

Electricals

electricals

Circuit Breaker Accessories

circuit-breaker-accessories

Circuit Breakers

circuit-breakers

Energy Monitoring Devices

energy-monitoring-devices

Mechanical Parts

mechanical-parts

Roller Bearing

roller-bearing

V Rings

v-rings

The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.

It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.

V-Ring VA 130NBR Material ID 117mm x OD 131mm x Thk 12.8mmThe V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.Replacement for Forsheda, NAK, SES

V-Ring VA 130
NBR Material&nbsp;
ID 117mm x OD 131mm x Thk 12.8mm
The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.
It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.
Replacement for Forsheda, NAK, SES

John

Others

Parker

Optibelt

VITON

SAMTECH

O Ring

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Washers

buyerIntroduction

Vring VA 130 Nbr ( Pack of 6pcs )

vring va 130 nbr pack 6pcs (bungkus 6pcs) rings gelang oem (pek oem/oem代工 nbr（6个装） v形圈 oem代工

vring-va-130-nbr-pack-of-6pcs

6pcs per pack

V-Ring VA 130EPDM Material ID 117mm x OD 131mm x Thk 12.8mmThe V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.Replacement for Forsheda, NAK, SES

V-Ring VA 130
EPDM Material&nbsp;
ID 117mm x OD 131mm x Thk 12.8mm
The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.
It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.
Replacement for Forsheda, NAK, SES

Vring VA 130 Epdm ( Pack of 6pcs )

vring va 130 epdm pack 6pcs (pack 6pcs) rings gelang oem (pek oem/oem代工 epdm（6个装） v形圈 oem代工

vring-va-130-epdm-pack-of-6pcs

Fluoroelastomer products provide excellent high temperature and aggressive fluids resistance for sealing and fluid transport applications in automotive, oil and gas, chemical processing, small engine, and other harsh sealing environments.

Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.

V-Ring VA 130FKM Fluoroelastomers MaterialFluoroelastomer products provide excellent high temperature and aggressive fluids resistance for sealing and fluid transport applications in automotive, oil and gas, chemical processing, small engine, and other harsh sealing environments.Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.ID 117mm x OD 131mm x Thk 12.8mmThe V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.Replacement for Forsheda, NAK, SES

V-Ring VA 130
FKM Fluoroelastomers Material
Fluoroelastomer products provide excellent high temperature and aggressive fluids resistance for sealing and fluid transport applications in automotive, oil and gas, chemical processing, small engine, and other harsh sealing environments.
Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.
ID 117mm x OD 131mm x Thk 12.8mm
The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.
It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.
Replacement for Forsheda, NAK, SES

Vring VA 130 Fkm Fluoroelastomers ( Pack of 4pcs )

vring va 130 fkm fluoroelastomers pack 4pcs fluoroelastomer (pak pcs) rings gelang oem (pek 4pcs) oem/oem代工 fkm含氟弹性体（4个装） v形圈 oem代工

vring-va-130-fkm-fluoroelastomers-pack-of-4pcs

4pcs per pack

V RING NBR VA130

Gates

Nachi

Bolts

Vee-Belts

Hydraulic Tools

V Ring Nbr VA130

ring nbr va130 cincin rings gelang oem 形环 v形圈 oem代工

v-ring-nbr-va130

 Schneider Electric 33661 100..130 V DC/AC 50/60 Hz - Voltage Release Mx or Xf

This is a MX shunt trip release for Compact NS 630b to Compact NS 3200 devices. Its rated voltage is 100VDC to 130VDC or 100VAC to 130VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage Un rises above 70% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 3200 device can be equipped with 1 MX or 1 MN auxiliary. 

Product or component type: Voltage release

Operating threshold: 0.7...1.1 x Un opening

50 ms +/- 10 % for Compact NS1600b...3200

Spare part for ComPacT NS630b...1600 new generation

Spare part for ComPacT NS1600b...3200 new generation

<h3 class="md-block-header-three"> Schneider Electric 33661 100..130 V DC/AC 50/60 Hz - Voltage Release Mx or Xf</h3>This is a MX shunt trip release for Compact NS 630b to Compact NS 3200 devices. Its rated voltage is 100VDC to 130VDC or 100VAC to 130VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage Un rises above 70% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 3200 device can be equipped with 1 MX or 1 MN auxiliary. Specifications: <ul class="md-block-unordered-list-item"><li>Range: ComPacT</li><li>Range of product:</li><ul class="md-block-unordered-list-item"><li>ComPacT NS630b...1600 new generation</li><li>ComPacT NS1600b...3200 new generation</li></ul><li>Device short name: MX</li><li>Product or component type: Voltage release</li><li>Device application: Control</li><li>Voltage release type: Opening coil</li><li>Instantaneous voltage release</li><li>Control type: Standard</li><li>[Uc] control circuit voltage:</li><ul class="md-block-unordered-list-item"><li>100...130 V AC 50/60 Hz</li><li>100...130 V DC</li></ul><li>Circuit breaker mounting mode: Fixed</li><li>Range compatibility:</li><ul class="md-block-unordered-list-item"><li>ComPact ComPact NS630b...1600</li><li>ComPact ComPact NS1600b...3200</li></ul><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Operating threshold: 0.7...1.1 x Un opening</li><li>Response time:</li><ul class="md-block-unordered-list-item"><li>50 ms +/- 10 % for Compact NS630b...1600</li><li>50 ms +/- 10 % for Compact NS1600b...3200</li><li>55 ms +/- 10 % for MasterPact NT</li><li>70 ms +/- 10 % for MasterPact NW</li></ul><li>Supply holding power: 4.5 VA</li></ul><li>Accessory / separate part category:</li><ul class="md-block-unordered-list-item"><li>Spare part for MasterPact NT</li><li>Spare part for MasterPact NW</li><li>Spare part for ComPacT NS630b...1600 new generation</li><li>Spare part for ComPacT NS1600b...3200 new generation</li></ul></ul>

<h3> Schneider Electric 33661 100..130 V DC/AC 50/60 Hz - Voltage Release Mx or Xf</h3>
This is a MX shunt trip release for Compact NS 630b to Compact NS 3200 devices. Its rated voltage is 100VDC to 130VDC or 100VAC to 130VAC 50/60Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage Un rises above 70% of its rated voltage Un. It complies with IEC 60947-2 standard. Compact NS 630b to Compact NS 3200 device can be equipped with 1 MX or 1 MN auxiliary.&nbsp;
Specifications:&nbsp;
<ul>
<li>Range: ComPacT</li>
<li>Range of product:</li>
<ul>
<li>ComPacT NS630b...1600 new generation</li>
<li>ComPacT NS1600b...3200 new generation</li>
</ul>
<li>Device short name: MX</li>
<li>Product or component type: Voltage release</li>
<li>Device application: Control</li>
<li>Voltage release type: Opening coil</li>
<li>Instantaneous voltage release</li>
<li>Control type: Standard</li>
<li>[Uc] control circuit voltage:</li>
<ul>
<li>100...130 V AC 50/60 Hz</li>
<li>100...130 V DC</li>
</ul>
<li>Circuit breaker mounting mode: Fixed</li>
<li>Range compatibility:</li>
<ul>
<li>ComPact ComPact NS630b...1600</li>
<li>ComPact ComPact NS1600b...3200</li>
</ul>
<li>Complementary:</li>
<ul>
<li>Operating threshold: 0.7...1.1 x Un opening</li>
<li>Response time:</li>
<ul>
<li>50 ms +/- 10 % for Compact NS630b...1600</li>
<li>50 ms +/- 10 % for Compact NS1600b...3200</li>
<li>55 ms +/- 10 % for MasterPact NT</li>
<li>70 ms +/- 10 % for MasterPact NW</li>
</ul>
<li>Supply holding power: 4.5 VA</li>
</ul>
<li>Accessory / separate part category:</li>
<ul>
<li>Spare part for MasterPact NT</li>
<li>Spare part for MasterPact NW</li>
<li>Spare part for ComPacT NS630b...1600 new generation</li>
<li>Spare part for ComPacT NS1600b...3200 new generation</li>
</ul>
</ul>

APC by Schneider Electric

CLIPSAL

Telemecanique

Square D

Light Switches

Contactors

Pilot Lights

Miniature Circuit Breakers - MCBs

Circuit Breaker

Uninterruptible Power Supply 

Molded Case Circuit Breakers - MCCBs

Overload Relays

Motor Protection Circuit Breakers

TV, Telephone & Internet Sockets

Schneider

Schneider Electric 33661 100..130 V DC/AC 50/60 Hz - Voltage Release Mx or Xf

schneider electric 33661 100..130 dc/ac 50/60 hz voltage release mx xf pelepasan tegangan atau circuit breaker accessories voltan electric/施耐德电气 电压释放 施耐德电气

schneider-electric-33661-100-130-v-dc-ac-50-60-hz-voltage-release-mx-or-xf

Schneider Electric A9MEM1522 Energy Sensor, Powertag Monoconnect 63A 1P+N Bottom Position

 
This PowerTag Energy M63 1P+N Bottom is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 1P+N Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be only mounted on the bottom of the protective device. The product color is white (RAL9003). The weight is 17,5g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.  

Range Compatibility: Various Acti 9 and Multi9 products

Class 1 current conforming to IEC 61557-12

Class 0.5 voltage conforming to IEC 61557-12

Class 1 active power conforming to IEC 61557-12

Class 1 active energy conforming to IEC 61557-12

Class 1 power factor conforming to IEC 61557-12

Event Management: Voltage loss with measured current at voltage loss

Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4

Electrical Connection (Voltage Sensing & Power Supply): Connector tooth

Directives: 2014/53/EU - Radio Equipment Directive

Ambient Air Temperature for Operation: -25…60 °C

Ambient Air Temperature for Storage: -40…85 °C

Overvoltage Category: III conforming to IEC 61010-1

Measurement Category: Category III conforming to IEC 61010-2-030

IP Degree of Protection: IP20 conforming to IEC 60529

Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3

Vibration Resistance: 3M4 conforming to IEC 60721-3-3

Industrial electromagnetic environment conforming to IEC 61326-1

Radiated EMC conforming to ETSI EN 301 489-17

Electromagnetic emission conforming to IEC 62311

Dustproof Class: 3S3 conforming to IEC 60721-3-3

Salt Mist Class: 3C2 conforming to IEC 60721-3-3

<h3 class="md-block-header-three">Schneider Electric A9MEM1522 Energy Sensor, Powertag Monoconnect 63A 1P+N Bottom Position</h3> This PowerTag Energy M63 1P+N Bottom is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 1P+N Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be only mounted on the bottom of the protective device. The product color is white (RAL9003). The weight is 17,5g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C. <ul class="md-block-unordered-list-item"><li>Range of Product: PowerLogic</li><li>Product Name: PowerTag A9 M63</li><li>Product or Component Type: Energy sensor</li><li>Poles: 1P + N</li><li>Maximum Current [Imax]: 63 A</li><li>Basic Current [Ib]: 10 A</li><li>Starting Current: 40 mA</li><li>Saturation Current: 130 A</li><li>Product Specific Application:</li><ul class="md-block-unordered-list-item"><li>Circuit monitoring</li><li>Cost allocation</li><li>Overload alarm</li><li>Load monitoring</li><li>Energy management</li></ul><li>Concentrator Compatibility:</li><ul class="md-block-unordered-list-item"><li>Acti9 Smartlink SI B</li><li>Acti9 Smartlink SI D</li><li>Acti9 PowerTag Link C</li><li>Acti9 PowerTag Link</li><li>Acti9 PowerTag Link HD</li><li>Wiser IP module</li><li>EcoStruxure Panel Server Universal</li><li>EcoStruxure Panel Server Advanced</li><li>PrismaSet Active</li></ul><li>Range Compatibility: Various Acti 9 and Multi9 products</li><li>Type of Measurement:</li><ul class="md-block-unordered-list-item"><li>Active energy</li><li>Power factor</li><li>Active power</li><li>Current</li><li>Voltage</li></ul><li>Accuracy Class:</li><ul class="md-block-unordered-list-item"><li>Class 1 current conforming to IEC 61557-12</li><li>Class 0.5 voltage conforming to IEC 61557-12</li><li>Class 1 active power conforming to IEC 61557-12</li><li>Class 1 active energy conforming to IEC 61557-12</li><li>Class 1 power factor conforming to IEC 61557-12</li></ul><li>Mounting Location: Bottom</li><li>Mounting Support: On circuit breaker</li><li>Product Destination: Switchboard</li><li>Event Management: Voltage loss with measured current at voltage loss</li><li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li><li>Emission Power: 10 mW </li><li>Mounting Mode: By screws (terminals)</li><li>Electrical Connection (Voltage Sensing &amp; Power Supply): Connector tooth</li><li>Cable Cross Section:</li><ul class="md-block-unordered-list-item"><li>1 rigid cable: 1.5…16 mm²</li><li>2 stranded cable: 1.5…2.5 mm²</li><li>2 rigid cable: 1.5…2.5 mm²</li><li>1 stranded cable: 1.5…16 mm²</li></ul><li>Supply Voltage: 200...240 V AC, +/- 20 %</li><li>Network Frequency: 50 Hz, 60 Hz</li><li>Maximum Power Consumption: 1 VA</li></ul>Technical Specifications:<ul class="md-block-unordered-list-item"><li>Standards:</li><ul class="md-block-unordered-list-item"><li>IEC 61557-12</li><li>IEC 61010-1</li><li>IEC 61010-2-030</li><li>IEC 61326-1</li><li>ETSI EN 300 328</li><li>ETSI EN 301 487-1</li></ul><li>Height: 16.5 mm</li><li>Width: 36 mm</li><li>Depth: 43 mm</li><li>Net Weight: 17.5 g</li><li>Colour: White (RAL 9003)</li><li>Quality Labels: CE</li><li>Directives: 2014/53/EU - Radio Equipment Directive</li><li>Operating Altitude: 0...2000 m</li><li>Ambient Air Temperature for Operation: -25…60 °C</li><li>Ambient Air Temperature for Storage: -40…85 °C</li><li>Overvoltage Category: III conforming to IEC 61010-1</li><li>Measurement Category: Category III conforming to IEC 61010-2-030</li><li>IP Degree of Protection: IP20 conforming to IEC 60529</li><li>IK Degree of Protection: IK05</li><li>Pollution Degree: 3</li><li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li><li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li><li>Electromagnetic Compatibility:</li><ul class="md-block-unordered-list-item"><li>Industrial electromagnetic environment conforming to IEC 61326-1</li><li>Radiated EMC conforming to ETSI EN 301 489-17</li><li>Electromagnetic emission conforming to IEC 62311</li></ul></ul>Environmental Characteristics:<ul class="md-block-unordered-list-item"><li>Dustproof Class: 3S3 conforming to IEC 60721-3-3</li><li>Salt Mist Class: 3C2 conforming to IEC 60721-3-3</li><li>Indoor Use</li></ul>

<h3>Schneider Electric A9MEM1522 Energy Sensor, Powertag Monoconnect 63A 1P+N Bottom Position</h3>
&nbsp; 
This PowerTag Energy M63 1P+N Bottom is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 1P+N Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be only mounted on the bottom of the protective device. The product color is white (RAL9003). The weight is 17,5g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.&nbsp;&nbsp;
<ul>
<li>Range of Product: PowerLogic</li>
<li>Product Name: PowerTag A9 M63</li>
<li>Product or Component Type: Energy sensor</li>
<li>Poles: 1P + N</li>
<li>Maximum Current [Imax]: 63 A</li>
<li>Basic Current [Ib]: 10 A</li>
<li>Starting Current: 40 mA</li>
<li>Saturation Current: 130 A</li>
<li>Product Specific Application:</li>
<ul>
<li>Circuit monitoring</li>
<li>Cost allocation</li>
<li>Overload alarm</li>
<li>Load monitoring</li>
<li>Energy management</li>
</ul>
<li>Concentrator Compatibility:</li>
<ul>
<li>Acti9 Smartlink SI B</li>
<li>Acti9 Smartlink SI D</li>
<li>Acti9 PowerTag Link C</li>
<li>Acti9 PowerTag Link</li>
<li>Acti9 PowerTag Link HD</li>
<li>Wiser IP module</li>
<li>EcoStruxure Panel Server Universal</li>
<li>EcoStruxure Panel Server Advanced</li>
<li>PrismaSet Active</li>
</ul>
<li>Range Compatibility: Various Acti 9 and Multi9 products</li>
<li>Type of Measurement:</li>
<ul>
<li>Active energy</li>
<li>Power factor</li>
<li>Active power</li>
<li>Current</li>
<li>Voltage</li>
</ul>
<li>Accuracy Class:</li>
<ul>
<li>Class 1 current conforming to IEC 61557-12</li>
<li>Class 0.5 voltage conforming to IEC 61557-12</li>
<li>Class 1 active power conforming to IEC 61557-12</li>
<li>Class 1 active energy conforming to IEC 61557-12</li>
<li>Class 1 power factor conforming to IEC 61557-12</li>
</ul>
<li>Mounting Location: Bottom</li>
<li>Mounting Support: On circuit breaker</li>
<li>Product Destination: Switchboard</li>
<li>Event Management: Voltage loss with measured current at voltage loss</li>
<li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li>
<li>Emission Power: 10 mW&nbsp;</li>
<li>Mounting Mode: By screws (terminals)</li>
<li>Electrical Connection (Voltage Sensing &amp; Power Supply): Connector tooth</li>
<li>Cable Cross Section:</li>
<ul>
<li>1 rigid cable: 1.5…16 mm²</li>
<li>2 stranded cable: 1.5…2.5 mm²</li>
<li>2 rigid cable: 1.5…2.5 mm²</li>
<li>1 stranded cable: 1.5…16 mm²</li>
</ul>
<li>Supply Voltage: 200...240 V AC, +/- 20 %</li>
<li>Network Frequency: 50 Hz, 60 Hz</li>
<li>Maximum Power Consumption: 1 VA</li>
</ul>
Technical Specifications:
<ul>
<li>Standards:</li>
<ul>
<li>IEC 61557-12</li>
<li>IEC 61010-1</li>
<li>IEC 61010-2-030</li>
<li>IEC 61326-1</li>
<li>ETSI EN 300 328</li>
<li>ETSI EN 301 487-1</li>
</ul>
<li>Height: 16.5 mm</li>
<li>Width: 36 mm</li>
<li>Depth: 43 mm</li>
<li>Net Weight: 17.5 g</li>
<li>Colour: White (RAL 9003)</li>
<li>Quality Labels: CE</li>
<li>Directives: 2014/53/EU - Radio Equipment Directive</li>
<li>Operating Altitude: 0...2000 m</li>
<li>Ambient Air Temperature for Operation: -25…60 °C</li>
<li>Ambient Air Temperature for Storage: -40…85 °C</li>
<li>Overvoltage Category: III conforming to IEC 61010-1</li>
<li>Measurement Category: Category III conforming to IEC 61010-2-030</li>
<li>IP Degree of Protection: IP20 conforming to IEC 60529</li>
<li>IK Degree of Protection: IK05</li>
<li>Pollution Degree: 3</li>
<li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li>
<li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li>
<li>Electromagnetic Compatibility:</li>
<ul>
<li>Industrial electromagnetic environment conforming to IEC 61326-1</li>
<li>Radiated EMC conforming to ETSI EN 301 489-17</li>
<li>Electromagnetic emission conforming to IEC 62311</li>
</ul>
</ul>
Environmental Characteristics:
<ul>
<li>Dustproof Class: 3S3 conforming to IEC 60721-3-3</li>
<li>Salt Mist Class: 3C2 conforming to IEC 60721-3-3</li>
<li>Indoor Use</li>
</ul>

Product Datasheet

User guide

Instruction sheet

Catalogue

Environmental disclosure

EasyPact Circuit Breakers 

Button Switch

Standby battery 

schneider electric a9mem1522 energy sensor, powertag monoconnect 63a 1p+n bottom position sensor energi a9mem1522, posisi bawah monitoring devices penderia tenaga, kedudukan electric/施耐德电气 电能传感器，powertag 底部位置 施耐德电气

schneider-electric-a9mem1522-energy-sensor-powertag-monoconnect-63a-1p-n-bottom-position

Schneider Electric A9MEM1521 Energy Sensor, Powertag Monoconnect 63A 1P+N Top Position

 This PowerTag Energy M63 1P+N Top is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 1P+N Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be only mounted on the top of the protective device. The product color is white (RAL9003). The weight is 17,5g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.  

<h3 class="md-block-header-three">Schneider Electric A9MEM1521 Energy Sensor, Powertag Monoconnect 63A 1P+N Top Position</h3> This PowerTag Energy M63 1P+N Top is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 1P+N Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be only mounted on the top of the protective device. The product color is white (RAL9003). The weight is 17,5g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C. <ul class="md-block-unordered-list-item"><li>Range of Product: PowerLogic</li><li>Product Name: PowerTag A9 M63</li><li>Product or Component Type: Energy sensor</li><li>Poles: 1P + N</li><li>Maximum Current [Imax]: 63 A</li><li>Basic Current [Ib]: 10 A</li><li>Starting Current: 40 mA</li><li>Saturation Current: 130 A</li><li>Product Specific Application:</li><ul class="md-block-unordered-list-item"><li>Overload alarm</li><li>Cost allocation</li><li>Circuit monitoring</li><li>Load monitoring</li><li>Energy management</li></ul><li>Concentrator Compatibility:</li><ul class="md-block-unordered-list-item"><li>Acti9 Smartlink SI B</li><li>Acti9 Smartlink SI D</li><li>Acti9 PowerTag Link C</li><li>Acti9 PowerTag Link</li><li>Acti9 PowerTag Link HD</li><li>Wiser IP module</li><li>EcoStruxure Panel Server Universal</li><li>EcoStruxure Panel Server Advanced</li><li>PrismaSet Active</li></ul><li>Range Compatibility: Various Acti 9 and Multi9 products</li><li>Type of Measurement:</li><ul class="md-block-unordered-list-item"><li>Power factor</li><li>Current</li><li>Active energy</li><li>Active power</li><li>Voltage</li></ul><li>Accuracy Class:</li><ul class="md-block-unordered-list-item"><li>Class 1 current conforming to IEC 61557-12</li><li>Class 0.5 voltage conforming to IEC 61557-12</li><li>Class 1 active power conforming to IEC 61557-12</li><li>Class 1 active energy conforming to IEC 61557-12</li><li>Class 1 power factor conforming to IEC 61557-12</li></ul><li>Mounting Location: Top</li><li>Mounting Support: On circuit breaker</li><li>Product Destination: Switchboard</li><li>Event Management: Voltage loss with measured current at voltage loss</li><li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li><li>Emission Power: 10 mW</li><li>Mounting Mode: By screws (terminals)</li><li>Electrical Connection (Voltage Sensing &amp; Power Supply): Connector tooth</li><li>Cable Cross Section:</li><ul class="md-block-unordered-list-item"><li>1 rigid cable: 1.5…16 mm²</li><li>2 stranded cable: 1.5…2.5 mm²</li><li>2 rigid cable: 1.5…2.5 mm²</li><li>1 stranded cable: 1.5…16 mm²</li></ul><li>Supply Voltage: 200...240 V AC, +/- 20 %</li><li>Network Frequency: 50 Hz, 60 Hz</li><li>Maximum Power Consumption: 1 VA</li><li>Standards:</li><ul class="md-block-unordered-list-item"><li>IEC 61557-12</li><li>IEC 61010-1</li><li>IEC 61010-2-030</li><li>IEC 61326-1</li><li>ETSI EN 300 328</li><li>ETSI EN 301 487-1</li></ul><li>Height: 16.5 mm</li><li>Width: 36 mm</li><li>Depth: 43 mm</li><li>Net Weight: 17.5 g</li><li>Colour: White (RAL 9003)</li><li>Quality Labels: CE</li><li>Directives: 2014/53/EU - Radio Equipment Directive</li><li>Operating Altitude: 0...2000 m</li><li>Ambient Air Temperature for Operation: -25…60 °C</li><li>Ambient Air Temperature for Storage: -40…85 °C</li><li>Overvoltage Category: III conforming to IEC 61010-1</li><li>Measurement Category: Category III conforming to IEC 61010-2-030</li><li>IP Degree of Protection: IP20 conforming to IEC 60529</li><li>IK Degree of Protection: IK05</li><li>Pollution Degree: 3</li><li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li><li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li><li>Electromagnetic Compatibility:</li><ul class="md-block-unordered-list-item"><li>Industrial electromagnetic environment conforming to IEC 61326-1</li><li>Radiated EMC conforming to ETSI EN 301 489-17</li><li>Electromagnetic emission conforming to IEC 62311</li></ul></ul>Environmental Characteristics:<ul class="md-block-unordered-list-item"><li>Dustproof Class: 3S3 conforming to IEC 60721-3-3</li><li>Salt Mist Class: 3C2 conforming to IEC 60721-3-3</li><li>Indoor Use</li></ul>

<h3>Schneider Electric A9MEM1521 Energy Sensor, Powertag Monoconnect 63A 1P+N Top Position</h3>
&nbsp;This PowerTag Energy M63 1P+N Top is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 1P+N Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be only mounted on the top of the protective device. The product color is white (RAL9003). The weight is 17,5g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.&nbsp;&nbsp;
<ul>
<li>Range of Product: PowerLogic</li>
<li>Product Name: PowerTag A9 M63</li>
<li>Product or Component Type: Energy sensor</li>
<li>Poles: 1P + N</li>
<li>Maximum Current [Imax]: 63 A</li>
<li>Basic Current [Ib]: 10 A</li>
<li>Starting Current: 40 mA</li>
<li>Saturation Current: 130 A</li>
<li>Product Specific Application:</li>
<ul>
<li>Overload alarm</li>
<li>Cost allocation</li>
<li>Circuit monitoring</li>
<li>Load monitoring</li>
<li>Energy management</li>
</ul>
<li>Concentrator Compatibility:</li>
<ul>
<li>Acti9 Smartlink SI B</li>
<li>Acti9 Smartlink SI D</li>
<li>Acti9 PowerTag Link C</li>
<li>Acti9 PowerTag Link</li>
<li>Acti9 PowerTag Link HD</li>
<li>Wiser IP module</li>
<li>EcoStruxure Panel Server Universal</li>
<li>EcoStruxure Panel Server Advanced</li>
<li>PrismaSet Active</li>
</ul>
<li>Range Compatibility: Various Acti 9 and Multi9 products</li>
<li>Type of Measurement:</li>
<ul>
<li>Power factor</li>
<li>Current</li>
<li>Active energy</li>
<li>Active power</li>
<li>Voltage</li>
</ul>
<li>Accuracy Class:</li>
<ul>
<li>Class 1 current conforming to IEC 61557-12</li>
<li>Class 0.5 voltage conforming to IEC 61557-12</li>
<li>Class 1 active power conforming to IEC 61557-12</li>
<li>Class 1 active energy conforming to IEC 61557-12</li>
<li>Class 1 power factor conforming to IEC 61557-12</li>
</ul>
<li>Mounting Location: Top</li>
<li>Mounting Support: On circuit breaker</li>
<li>Product Destination: Switchboard</li>
<li>Event Management: Voltage loss with measured current at voltage loss</li>
<li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li>
<li>Emission Power: 10 mW</li>
<li>Mounting Mode: By screws (terminals)</li>
<li>Electrical Connection (Voltage Sensing &amp; Power Supply): Connector tooth</li>
<li>Cable Cross Section:</li>
<ul>
<li>1 rigid cable: 1.5…16 mm²</li>
<li>2 stranded cable: 1.5…2.5 mm²</li>
<li>2 rigid cable: 1.5…2.5 mm²</li>
<li>1 stranded cable: 1.5…16 mm²</li>
</ul>
<li>Supply Voltage: 200...240 V AC, +/- 20 %</li>
<li>Network Frequency: 50 Hz, 60 Hz</li>
<li>Maximum Power Consumption: 1 VA</li>
<li>Standards:</li>
<ul>
<li>IEC 61557-12</li>
<li>IEC 61010-1</li>
<li>IEC 61010-2-030</li>
<li>IEC 61326-1</li>
<li>ETSI EN 300 328</li>
<li>ETSI EN 301 487-1</li>
</ul>
<li>Height: 16.5 mm</li>
<li>Width: 36 mm</li>
<li>Depth: 43 mm</li>
<li>Net Weight: 17.5 g</li>
<li>Colour: White (RAL 9003)</li>
<li>Quality Labels: CE</li>
<li>Directives: 2014/53/EU - Radio Equipment Directive</li>
<li>Operating Altitude: 0...2000 m</li>
<li>Ambient Air Temperature for Operation: -25…60 °C</li>
<li>Ambient Air Temperature for Storage: -40…85 °C</li>
<li>Overvoltage Category: III conforming to IEC 61010-1</li>
<li>Measurement Category: Category III conforming to IEC 61010-2-030</li>
<li>IP Degree of Protection: IP20 conforming to IEC 60529</li>
<li>IK Degree of Protection: IK05</li>
<li>Pollution Degree: 3</li>
<li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li>
<li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li>
<li>Electromagnetic Compatibility:</li>
<ul>
<li>Industrial electromagnetic environment conforming to IEC 61326-1</li>
<li>Radiated EMC conforming to ETSI EN 301 489-17</li>
<li>Electromagnetic emission conforming to IEC 62311</li>
</ul>
</ul>
Environmental Characteristics:
<ul>
<li>Dustproof Class: 3S3 conforming to IEC 60721-3-3</li>
<li>Salt Mist Class: 3C2 conforming to IEC 60721-3-3</li>
<li>Indoor Use</li>
</ul>

schneider electric a9mem1521 energy sensor, powertag monoconnect 63a 1p+n top position sensor energi a9mem1521, posisi teratas monitoring devices penderia tenaga, kedudukan electric/施耐德电气 电能传感器，powertag 顶部位置 施耐德电气

schneider-electric-a9mem1521-energy-sensor-powertag-monoconnect-63a-1p-n-top-position

Schneider Electric A9MEM1560 Energy Sensor, Powertag Flex 230V 63A 1P+N Top and Bottom Position

 This PowerTag Energy F63 1P+N is a wireless communication energy sensor. With its Flex design, it is dedicated to 1P+N devices, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be either mounted on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 16g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.  

Electrical Connection (Voltage Sensing & Power Supply): Wires with cable end

Dustproof class 3S3 conforming to IEC 60721-3-3

Salt mist class 3C2 conforming to IEC 60721-3-3

<h3 class="md-block-header-three">Schneider Electric A9MEM1560 Energy Sensor, Powertag Flex 230V 63A 1P+N Top and Bottom Position</h3> This PowerTag Energy F63 1P+N is a wireless communication energy sensor. With its Flex design, it is dedicated to 1P+N devices, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be either mounted on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 16g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C. <ul class="md-block-unordered-list-item"><li>Range of Product: PowerLogic</li><li>Product Name: PowerTag A9 F63</li><li>Product or Component Type: Energy sensor</li><li>Poles: 1P + N</li><li>Maximum Current [Imax]: 63 A</li><li>Basic Current [Ib]: 10 A</li><li>Starting Current: 40 mA</li><li>Saturation Current: 130 A</li><li>Product Specific Application:</li><ul class="md-block-unordered-list-item"><li>Cost allocation</li><li>Load monitoring</li><li>Circuit monitoring</li><li>Overload alarm</li><li>Energy management</li></ul><li>Concentrator Compatibility:</li><ul class="md-block-unordered-list-item"><li>Acti9 Smartlink SI B</li><li>Acti9 Smartlink SI D</li><li>Acti9 PowerTag Link C</li><li>Acti9 PowerTag Link</li><li>Acti9 PowerTag Link HD</li><li>Harmony Hub</li><li>Wiser IP module</li><li>EcoStruxure Panel Server Universal</li><li>EcoStruxure Panel Server Advanced</li><li>PrismaSet Active</li></ul><li>Range Compatibility:</li><ul class="md-block-unordered-list-item"><li>Acti 9 Acti9 iCV40</li><li>Acti 9 Vigi iC40</li><li>Acti 9 Vigi iC60</li><li>Acti 9 Acti9 iDD40 XA</li><li>Acti 9 Acti9 iCV40 XA</li><li>Acti 9 Vigi iDT40</li></ul><li>Type of Measurement:</li><ul class="md-block-unordered-list-item"><li>Active energy</li><li>Current</li><li>Voltage</li><li>Power factor</li><li>Active power</li></ul><li>Accuracy Class:</li><ul class="md-block-unordered-list-item"><li>Class 1 current conforming to IEC 61557-12</li><li>Class 0.5 voltage conforming to IEC 61557-12</li><li>Class 1 active power conforming to IEC 61557-12</li><li>Class 1 active energy conforming to IEC 61557-12</li><li>Class 1 power factor conforming to IEC 61557-12</li></ul><li>Mounting Location: Top or bottom</li><li>Mounting Support: On circuit breaker</li><li>Product Destination: Switchboard</li><li>Event Management: Voltage loss with measured current at voltage loss</li><li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li><li>Emission Power: 10 mW</li><li>Mounting Mode: By screws (terminals)</li><li>Electrical Connection (Voltage Sensing &amp; Power Supply): Wires with cable end</li><li>Cable Cross Section:</li><ul class="md-block-unordered-list-item"><li>1 rigid cable: 1.5…16 mm²</li><li>2 stranded cable: 1.5…2.5 mm²</li><li>2 rigid cable: 1.5…2.5 mm²</li><li>1 stranded cable: 1.5…16 mm²</li></ul><li>Cable Length: 0.25 m</li><li>Supply Voltage: 200...240 V AC, +/- 20 %</li><li>Network Frequency: 50 Hz, 60 Hz</li><li>Maximum Power Consumption: 1 VA</li><li>Standards:</li><ul class="md-block-unordered-list-item"><li>IEC 61557-12</li><li>IEC 61010-1</li><li>IEC 61010-2-030</li><li>IEC 61326-1</li><li>ETSI EN 300 328</li><li>ETSI EN 301 487-1</li></ul><li>Height (Sensor Element): 20 mm</li><li>Width (Sensor Element): 18 mm</li><li>Depth (Sensor Element): 44.5 mm</li><li>Net Weight: 16 g</li><li>Colour: White (RAL 9003)</li><li>Quality Labels: CE</li><li>Directives: 2014/53/EU - Radio Equipment Directive</li><li>Operating Altitude: 0...2000 m</li><li>Ambient Air Temperature for Operation: -25…60 °C</li><li>Ambient Air Temperature for Storage: -40…85 °C</li><li>Overvoltage Category: III conforming to IEC 61010-1</li><li>Measurement Category: Category III conforming to IEC 61010-2-030</li><li>IP Degree of Protection: IP20 conforming to IEC 60529</li><li>IK Degree of Protection: IK05</li><li>Pollution Degree: 3</li><li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li><li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li><li>Electromagnetic Compatibility:</li><ul class="md-block-unordered-list-item"><li>Industrial electromagnetic environment conforming to IEC 61326-1</li><li>Radiated EMC conforming to ETSI EN 301 489-17</li><li>Electromagnetic emission conforming to IEC 62311</li></ul><li>Environmental Characteristics:</li></ul>Dustproof class 3S3 conforming to IEC 60721-3-3Salt mist class 3C2 conforming to IEC 60721-3-3Indoor use

<h3>Schneider Electric A9MEM1560 Energy Sensor, Powertag Flex 230V 63A 1P+N Top and Bottom Position</h3>
&nbsp;This PowerTag Energy F63 1P+N is a wireless communication energy sensor. With its Flex design, it is dedicated to 1P+N devices, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be either mounted on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 16g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.&nbsp;&nbsp;
<ul>
<li>Range of Product: PowerLogic</li>
<li>Product Name: PowerTag A9 F63</li>
<li>Product or Component Type: Energy sensor</li>
<li>Poles: 1P + N</li>
<li>Maximum Current [Imax]: 63 A</li>
<li>Basic Current [Ib]: 10 A</li>
<li>Starting Current: 40 mA</li>
<li>Saturation Current: 130 A</li>
<li>Product Specific Application:</li>
<ul>
<li>Cost allocation</li>
<li>Load monitoring</li>
<li>Circuit monitoring</li>
<li>Overload alarm</li>
<li>Energy management</li>
</ul>
<li>Concentrator Compatibility:</li>
<ul>
<li>Acti9 Smartlink SI B</li>
<li>Acti9 Smartlink SI D</li>
<li>Acti9 PowerTag Link C</li>
<li>Acti9 PowerTag Link</li>
<li>Acti9 PowerTag Link HD</li>
<li>Harmony Hub</li>
<li>Wiser IP module</li>
<li>EcoStruxure Panel Server Universal</li>
<li>EcoStruxure Panel Server Advanced</li>
<li>PrismaSet Active</li>
</ul>
<li>Range Compatibility:</li>
<ul>
<li>Acti 9 Acti9 iCV40</li>
<li>Acti 9 Vigi iC40</li>
<li>Acti 9 Vigi iC60</li>
<li>Acti 9 Acti9 iDD40 XA</li>
<li>Acti 9 Acti9 iCV40 XA</li>
<li>Acti 9 Vigi iDT40</li>
</ul>
<li>Type of Measurement:</li>
<ul>
<li>Active energy</li>
<li>Current</li>
<li>Voltage</li>
<li>Power factor</li>
<li>Active power</li>
</ul>
<li>Accuracy Class:</li>
<ul>
<li>Class 1 current conforming to IEC 61557-12</li>
<li>Class 0.5 voltage conforming to IEC 61557-12</li>
<li>Class 1 active power conforming to IEC 61557-12</li>
<li>Class 1 active energy conforming to IEC 61557-12</li>
<li>Class 1 power factor conforming to IEC 61557-12</li>
</ul>
<li>Mounting Location: Top or bottom</li>
<li>Mounting Support: On circuit breaker</li>
<li>Product Destination: Switchboard</li>
<li>Event Management: Voltage loss with measured current at voltage loss</li>
<li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li>
<li>Emission Power: 10 mW</li>
<li>Mounting Mode: By screws (terminals)</li>
<li>Electrical Connection (Voltage Sensing &amp; Power Supply): Wires with cable end</li>
<li>Cable Cross Section:</li>
<ul>
<li>1 rigid cable: 1.5…16 mm²</li>
<li>2 stranded cable: 1.5…2.5 mm²</li>
<li>2 rigid cable: 1.5…2.5 mm²</li>
<li>1 stranded cable: 1.5…16 mm²</li>
</ul>
<li>Cable Length: 0.25 m</li>
<li>Supply Voltage: 200...240 V AC, +/- 20 %</li>
<li>Network Frequency: 50 Hz, 60 Hz</li>
<li>Maximum Power Consumption: 1 VA</li>
<li>Standards:</li>
<ul>
<li>IEC 61557-12</li>
<li>IEC 61010-1</li>
<li>IEC 61010-2-030</li>
<li>IEC 61326-1</li>
<li>ETSI EN 300 328</li>
<li>ETSI EN 301 487-1</li>
</ul>
<li>Height (Sensor Element): 20 mm</li>
<li>Width (Sensor Element): 18 mm</li>
<li>Depth (Sensor Element): 44.5 mm</li>
<li>Net Weight: 16 g</li>
<li>Colour: White (RAL 9003)</li>
<li>Quality Labels: CE</li>
<li>Directives: 2014/53/EU - Radio Equipment Directive</li>
<li>Operating Altitude: 0...2000 m</li>
<li>Ambient Air Temperature for Operation: -25…60 °C</li>
<li>Ambient Air Temperature for Storage: -40…85 °C</li>
<li>Overvoltage Category: III conforming to IEC 61010-1</li>
<li>Measurement Category: Category III conforming to IEC 61010-2-030</li>
<li>IP Degree of Protection: IP20 conforming to IEC 60529</li>
<li>IK Degree of Protection: IK05</li>
<li>Pollution Degree: 3</li>
<li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li>
<li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li>
<li>Electromagnetic Compatibility:</li>
<ul>
<li>Industrial electromagnetic environment conforming to IEC 61326-1</li>
<li>Radiated EMC conforming to ETSI EN 301 489-17</li>
<li>Electromagnetic emission conforming to IEC 62311</li>
</ul>
<li>Environmental Characteristics:</li>
</ul>
Dustproof class 3S3 conforming to IEC 60721-3-3
Salt mist class 3C2 conforming to IEC 60721-3-3
Indoor use

schneider electric a9mem1560 energy sensor, powertag flex 230v 63a 1p+n top bottom position sensor energi a9mem1560, posisi atas dan bawah monitoring devices tenaga, kedudukan electric/施耐德电气 能量传感器，powertag 顶部和底部位置 施耐德电气

schneider-electric-a9mem1560-energy-sensor-powertag-flex-230v-63a-1p-n-top-and-bottom-position

Schneider Electric A9MEM1540 Energy Sensor, Powertag Monoconnect 63A 3P Top and Bottom Position

This PowerTag Energy M63 3P is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 3P Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-phase 380VAC to 415VAC +/- 20%. The maximum consumption is below or equal to 2VA. It can be either mounted on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 28g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.  

Supply Voltage: 380...415 V AC, +/- 20 %, between phases

<h3 class="md-block-header-three">Schneider Electric A9MEM1540 Energy Sensor, Powertag Monoconnect 63A 3P Top and Bottom Position</h3>This PowerTag Energy M63 3P is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 3P Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-phase 380VAC to 415VAC +/- 20%. The maximum consumption is below or equal to 2VA. It can be either mounted on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 28g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C. <ul class="md-block-unordered-list-item"><li>Range of Product: PowerLogic</li><li>Product Name: PowerTag A9 M63</li><li>Product or Component Type: Energy sensor</li><li>Poles: 3P</li><li>Maximum Current [Imax]: 63 A</li><li>Basic Current [Ib]: 10 A</li><li>Starting Current: 40 mA</li><li>Saturation Current: 130 A</li><li>Product Specific Application:</li><ul class="md-block-unordered-list-item"><li>Circuit monitoring</li><li>Cost allocation</li><li>Load monitoring</li><li>Overload alarm</li><li>Energy management</li></ul><li>Concentrator Compatibility:</li><ul class="md-block-unordered-list-item"><li>Acti9 Smartlink SI B</li><li>Acti9 Smartlink SI D</li><li>Acti9 PowerTag Link C</li><li>Acti9 PowerTag Link</li><li>Acti9 PowerTag Link HD</li><li>Wiser IP module</li><li>EcoStruxure Panel Server Universal</li><li>EcoStruxure Panel Server Advanced</li><li>PrismaSet Active</li></ul><li>Range Compatibility: Various Acti 9 and Multi9 products</li><li>Type of Measurement:</li><ul class="md-block-unordered-list-item"><li>Active power</li><li>Current</li><li>Voltage</li><li>Power factor</li><li>Active energy</li></ul><li>Accuracy Class:</li><ul class="md-block-unordered-list-item"><li>Class 1 current conforming to IEC 61557-12</li><li>Class 0.5 voltage conforming to IEC 61557-12</li><li>Class 1 active power conforming to IEC 61557-12</li><li>Class 1 active energy conforming to IEC 61557-12</li><li>Class 1 power factor conforming to IEC 61557-12</li></ul><li>Mounting Location: Top or bottom</li><li>Mounting Support: On circuit breaker</li><li>Product Destination: Switchboard</li><li>Event Management: Voltage loss with measured current at voltage loss</li><li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li><li>Emission Power: 10 mW</li><li>Mounting Mode: By screws (terminals)</li><li>Electrical Connection (Voltage Sensing &amp; Power Supply): Connector tooth</li><li>Cable Cross Section:</li><ul class="md-block-unordered-list-item"><li>1 rigid cable: 1.5…16 mm²</li><li>2 stranded cable: 1.5…2.5 mm²</li><li>2 rigid cable: 1.5…2.5 mm²</li><li>1 stranded cable: 1.5…16 mm²</li></ul><li>Supply Voltage: 380...415 V AC, +/- 20 %, between phases</li><li>Network Frequency: 50 Hz, 60 Hz</li><li>Maximum Power Consumption: 2 VA</li><li>Standards:</li><ul class="md-block-unordered-list-item"><li>IEC 61557-12</li><li>IEC 61010-1</li><li>IEC 61010-2-030</li><li>IEC 61326-1</li><li>ETSI EN 300 328</li><li>ETSI EN 301 487-1</li></ul><li>Height: 16.5 mm</li><li>Width: 54 mm</li><li>Depth: 43 mm</li><li>Net Weight: 28 g</li><li>Colour: White (RAL 9003)</li><li>Quality Labels: CE</li><li>Directives: 2014/53/EU - Radio Equipment Directive</li><li>Operating Altitude: 0...2000 m</li><li>Ambient Air Temperature for Operation: -25…60 °C</li><li>Ambient Air Temperature for Storage: -40…85 °C</li><li>Overvoltage Category: III conforming to IEC 61010-1</li><li>Measurement Category: Category III conforming to IEC 61010-2-030</li><li>IP Degree of Protection: IP20 conforming to IEC 60529</li><li>IK Degree of Protection: IK05</li><li>Pollution Degree: 3</li><li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li><li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li><li>Electromagnetic Compatibility:</li><ul class="md-block-unordered-list-item"><li>Industrial electromagnetic environment conforming to IEC 61326-1</li><li>Radiated EMC conforming to ETSI EN 301 489-17</li><li>Electromagnetic emission conforming to IEC 62311</li></ul></ul>Environmental Characteristics:<ul class="md-block-unordered-list-item"><li>Dustproof Class: 3S3 conforming to IEC 60721-3-3</li><li>Salt Mist Class: 3C2 conforming to IEC 60721-3-3</li><li>Indoor Use</li></ul>

<h3>Schneider Electric A9MEM1540 Energy Sensor, Powertag Monoconnect 63A 3P Top and Bottom Position</h3>
This PowerTag Energy M63 3P is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 3P Monoconnect devices with 18mm pitch between phase and neutral, rating less than or equal 63A. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-phase 380VAC to 415VAC +/- 20%. The maximum consumption is below or equal to 2VA. It can be either mounted on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 28g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.&nbsp;&nbsp;
<ul>
<li>Range of Product: PowerLogic</li>
<li>Product Name: PowerTag A9 M63</li>
<li>Product or Component Type: Energy sensor</li>
<li>Poles: 3P</li>
<li>Maximum Current [Imax]: 63 A</li>
<li>Basic Current [Ib]: 10 A</li>
<li>Starting Current: 40 mA</li>
<li>Saturation Current: 130 A</li>
<li>Product Specific Application:</li>
<ul>
<li>Circuit monitoring</li>
<li>Cost allocation</li>
<li>Load monitoring</li>
<li>Overload alarm</li>
<li>Energy management</li>
</ul>
<li>Concentrator Compatibility:</li>
<ul>
<li>Acti9 Smartlink SI B</li>
<li>Acti9 Smartlink SI D</li>
<li>Acti9 PowerTag Link C</li>
<li>Acti9 PowerTag Link</li>
<li>Acti9 PowerTag Link HD</li>
<li>Wiser IP module</li>
<li>EcoStruxure Panel Server Universal</li>
<li>EcoStruxure Panel Server Advanced</li>
<li>PrismaSet Active</li>
</ul>
<li>Range Compatibility: Various Acti 9 and Multi9 products</li>
<li>Type of Measurement:</li>
<ul>
<li>Active power</li>
<li>Current</li>
<li>Voltage</li>
<li>Power factor</li>
<li>Active energy</li>
</ul>
<li>Accuracy Class:</li>
<ul>
<li>Class 1 current conforming to IEC 61557-12</li>
<li>Class 0.5 voltage conforming to IEC 61557-12</li>
<li>Class 1 active power conforming to IEC 61557-12</li>
<li>Class 1 active energy conforming to IEC 61557-12</li>
<li>Class 1 power factor conforming to IEC 61557-12</li>
</ul>
<li>Mounting Location: Top or bottom</li>
<li>Mounting Support: On circuit breaker</li>
<li>Product Destination: Switchboard</li>
<li>Event Management: Voltage loss with measured current at voltage loss</li>
<li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li>
<li>Emission Power: 10 mW</li>
<li>Mounting Mode: By screws (terminals)</li>
<li>Electrical Connection (Voltage Sensing &amp; Power Supply): Connector tooth</li>
<li>Cable Cross Section:</li>
<ul>
<li>1 rigid cable: 1.5…16 mm²</li>
<li>2 stranded cable: 1.5…2.5 mm²</li>
<li>2 rigid cable: 1.5…2.5 mm²</li>
<li>1 stranded cable: 1.5…16 mm²</li>
</ul>
<li>Supply Voltage: 380...415 V AC, +/- 20 %, between phases</li>
<li>Network Frequency: 50 Hz, 60 Hz</li>
<li>Maximum Power Consumption: 2 VA</li>
<li>Standards:</li>
<ul>
<li>IEC 61557-12</li>
<li>IEC 61010-1</li>
<li>IEC 61010-2-030</li>
<li>IEC 61326-1</li>
<li>ETSI EN 300 328</li>
<li>ETSI EN 301 487-1</li>
</ul>
<li>Height: 16.5 mm</li>
<li>Width: 54 mm</li>
<li>Depth: 43 mm</li>
<li>Net Weight: 28 g</li>
<li>Colour: White (RAL 9003)</li>
<li>Quality Labels: CE</li>
<li>Directives: 2014/53/EU - Radio Equipment Directive</li>
<li>Operating Altitude: 0...2000 m</li>
<li>Ambient Air Temperature for Operation: -25…60 °C</li>
<li>Ambient Air Temperature for Storage: -40…85 °C</li>
<li>Overvoltage Category: III conforming to IEC 61010-1</li>
<li>Measurement Category: Category III conforming to IEC 61010-2-030</li>
<li>IP Degree of Protection: IP20 conforming to IEC 60529</li>
<li>IK Degree of Protection: IK05</li>
<li>Pollution Degree: 3</li>
<li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li>
<li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li>
<li>Electromagnetic Compatibility:</li>
<ul>
<li>Industrial electromagnetic environment conforming to IEC 61326-1</li>
<li>Radiated EMC conforming to ETSI EN 301 489-17</li>
<li>Electromagnetic emission conforming to IEC 62311</li>
</ul>
</ul>
Environmental Characteristics:
<ul>
<li>Dustproof Class: 3S3 conforming to IEC 60721-3-3</li>
<li>Salt Mist Class: 3C2 conforming to IEC 60721-3-3</li>
<li>Indoor Use</li>
</ul>

schneider electric a9mem1540 energy sensor, powertag monoconnect 63a 3p top bottom position sensor energi a9mem1540, posisi atas dan bawah monitoring devices penderia tenaga kedudukan electric/施耐德电气 能量传感器，powertag 顶部和底部位置 施耐德电气

schneider-electric-a9mem1540-energy-sensor-powertag-monoconnect-63a-3p-top-and-bottom-position

Schneider Electric A9MEM1520 Powertag Acti9 Monoconnect 1P+W Top and Bottom Position Max 63A Energy Sensor

This PowerTag Energy M63 1P+Wire is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 1P Monoconnect devices rating less than or equal 63A. The neutral blue wire is to be connected to a neutral terminal block. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be either mounted on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 16,4g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.  

Electrical Connection (Voltage Sensing & Power Supply): Connector tooth and wire

<h3 class="md-block-header-three">Schneider Electric A9MEM1520 Powertag Acti9 Monoconnect 1P+W Top and Bottom Position Max 63A Energy Sensor</h3>This PowerTag Energy M63 1P+Wire is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 1P Monoconnect devices rating less than or equal 63A. The neutral blue wire is to be connected to a neutral terminal block. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be either mounted on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 16,4g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C. <ul class="md-block-unordered-list-item"><li>Range of Product: PowerLogic</li><li>Product Name: PowerTag A9 M63</li><li>Product or Component Type: Energy sensor</li><li>Poles: 1P</li><li>Maximum Current [Imax]: 63 A</li><li>Basic Current [Ib]: 10 A</li><li>Starting Current: 40 mA</li><li>Saturation Current: 130 A</li><li>Product Specific Application:</li><ul class="md-block-unordered-list-item"><li>Load monitoring</li><li>Overload alarm</li><li>Cost allocation</li><li>Circuit monitoring</li><li>Energy management</li></ul><li>Concentrator Compatibility:</li><ul class="md-block-unordered-list-item"><li>Acti9 Smartlink SI B</li><li>Acti9 Smartlink SI D</li><li>Acti9 PowerTag Link C</li><li>Acti9 PowerTag Link</li><li>Acti9 PowerTag Link HD</li><li>Wiser IP module</li><li>EcoStruxure Panel Server Universal</li><li>EcoStruxure Panel Server Advanced</li><li>PrismaSet Active</li></ul><li>Range Compatibility:</li><ul class="md-block-unordered-list-item"><li>Acti 9 Acti9 iKQE RCBO</li><li>Multi9 Multi9 C60</li><li>Multi9 Multi9 ID</li><li>Multi9 Multi9 C32N</li><li>Multi9 Multi9 C65</li><li>Acti 9 Acti9 iID</li><li>Acti 9 Acti9 iID K</li><li>Acti 9 Acti9 iK60</li><li>Acti 9 Acti9 iKQ</li><li>Acti 9 Acti9 K60</li><li>Acti 9 Acti9 Reflex iC60</li><li>Acti 9 Acti9 iC65</li><li>Acti 9 Acti9 DT60</li><li>Acti 9 Acti9 iC60 single terminal</li></ul><li>Type of Measurement:</li><ul class="md-block-unordered-list-item"><li>Voltage</li><li>Power factor</li><li>Active energy</li><li>Current</li><li>Active power</li></ul><li>Accuracy Class:</li><ul class="md-block-unordered-list-item"><li>Class 1 current conforming to IEC 61557-12</li><li>Class 0.5 voltage conforming to IEC 61557-12</li><li>Class 1 active power conforming to IEC 61557-12</li><li>Class 1 active energy conforming to IEC 61557-12</li><li>Class 1 power factor conforming to IEC 61557-12</li></ul><li>Mounting Location: Top or bottom</li><li>Mounting Support: On circuit breaker</li><li>Product Destination: Switchboard</li><li>Event Management: Voltage loss with measured current at voltage loss</li><li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li><li>Emission Power: 10 mW</li><li>Mounting Mode: By screws (terminals)</li><li>Electrical Connection (Voltage Sensing &amp; Power Supply): Connector tooth and wire</li><li>Cable Cross Section:</li><ul class="md-block-unordered-list-item"><li>1 rigid cable: 1.5…16 mm²</li><li>2 stranded cable: 1.5…2.5 mm²</li><li>2 rigid cable: 1.5…2.5 mm²</li><li>1 stranded cable: 1.5…16 mm²</li></ul><li>Cable Length: 1 m</li><li>Supply Voltage: 200...240 V AC, +/- 20 %</li><li>Cable Composition: 1 x 0.33 mm²</li><li>Network Frequency: 50 Hz, 60 Hz</li><li>Maximum Power Consumption: 1 VA</li><li>Standards:</li><ul class="md-block-unordered-list-item"><li>IEC 61557-12</li><li>IEC 61010-1</li><li>IEC 61010-2-030</li><li>IEC 61326-1</li><li>ETSI EN 300 328</li><li>ETSI EN 301 487-1</li></ul><li>Height: 16.5 mm</li><li>Width: 18 mm</li><li>Depth: 43 mm</li><li>Net Weight: 16.4 g</li><li>Colour: White (RAL 9003)</li><li>Quality Labels: CE</li><li>Directives: 2014/53/EU - Radio Equipment Directive</li><li>Operating Altitude: 0...2000 m</li><li>Ambient Air Temperature for Operation: -25…60 °C</li><li>Ambient Air Temperature for Storage: -40…85 °C</li><li>Overvoltage Category: III conforming to IEC 61010-1</li><li>Measurement Category: Category III conforming to IEC 61010-2-030</li><li>IP Degree of Protection: IP20 conforming to IEC 60529</li><li>IK Degree of Protection: IK05</li><li>Pollution Degree: 3</li><li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li><li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li><li>Electromagnetic Compatibility:</li><ul class="md-block-unordered-list-item"><li>Industrial electromagnetic environment conforming to IEC 61326-1</li><li>Radiated EMC conforming to ETSI EN 301 489-17</li><li>Electromagnetic emission conforming to IEC 62311</li></ul><li>Environmental Characteristics:</li></ul>Dustproof Class: 3S3 conforming to IEC 60721-3-3Salt Mist Class: 3C2 conforming to IEC 60721-3-3Indoor Use

<h3>Schneider Electric A9MEM1520 Powertag Acti9 Monoconnect 1P+W Top and Bottom Position Max 63A Energy Sensor</h3>
This PowerTag Energy M63 1P+Wire is a wireless communication energy sensor. It is dedicated to Acti9 and Multi9 1P Monoconnect devices rating less than or equal 63A. The neutral blue wire is to be connected to a neutral terminal block. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active energy, active power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized. PowerTag Energy 63A complies with IEC 61557-12 standard. It is a PMD-I/DD/K55/1. The Performance category is Class 1. The Imax Maximum current is 63A. The Ib Base current is 10A. The Saturation current is 130A. The Ist Starting current is 40mA. The Un rated voltage is Phase-to-neutral 200VAC to 240VAC +/- 20%. The maximum consumption is below or equal to 1VA. It can be either mounted on the top or the bottom of the protective device. The product color is white (RAL9003). The weight is 16,4g. The degree of protection is IP20 and IK05 The operating temperature is between -25°C to +60°C. The Storage temperature is between -40°C to +85°C.&nbsp;&nbsp;
<ul>
<li>Range of Product: PowerLogic</li>
<li>Product Name: PowerTag A9 M63</li>
<li>Product or Component Type: Energy sensor</li>
<li>Poles: 1P</li>
<li>Maximum Current [Imax]: 63 A</li>
<li>Basic Current [Ib]: 10 A</li>
<li>Starting Current: 40 mA</li>
<li>Saturation Current: 130 A</li>
<li>Product Specific Application:</li>
<ul>
<li>Load monitoring</li>
<li>Overload alarm</li>
<li>Cost allocation</li>
<li>Circuit monitoring</li>
<li>Energy management</li>
</ul>
<li>Concentrator Compatibility:</li>
<ul>
<li>Acti9 Smartlink SI B</li>
<li>Acti9 Smartlink SI D</li>
<li>Acti9 PowerTag Link C</li>
<li>Acti9 PowerTag Link</li>
<li>Acti9 PowerTag Link HD</li>
<li>Wiser IP module</li>
<li>EcoStruxure Panel Server Universal</li>
<li>EcoStruxure Panel Server Advanced</li>
<li>PrismaSet Active</li>
</ul>
<li>Range Compatibility:</li>
<ul>
<li>Acti 9 Acti9 iKQE RCBO</li>
<li>Multi9 Multi9 C60</li>
<li>Multi9 Multi9 ID</li>
<li>Multi9 Multi9 C32N</li>
<li>Multi9 Multi9 C65</li>
<li>Acti 9 Acti9 iID</li>
<li>Acti 9 Acti9 iID K</li>
<li>Acti 9 Acti9 iK60</li>
<li>Acti 9 Acti9 iKQ</li>
<li>Acti 9 Acti9 K60</li>
<li>Acti 9 Acti9 Reflex iC60</li>
<li>Acti 9 Acti9 iC65</li>
<li>Acti 9 Acti9 DT60</li>
<li>Acti 9 Acti9 iC60 single terminal</li>
</ul>
<li>Type of Measurement:</li>
<ul>
<li>Voltage</li>
<li>Power factor</li>
<li>Active energy</li>
<li>Current</li>
<li>Active power</li>
</ul>
<li>Accuracy Class:</li>
<ul>
<li>Class 1 current conforming to IEC 61557-12</li>
<li>Class 0.5 voltage conforming to IEC 61557-12</li>
<li>Class 1 active power conforming to IEC 61557-12</li>
<li>Class 1 active energy conforming to IEC 61557-12</li>
<li>Class 1 power factor conforming to IEC 61557-12</li>
</ul>
<li>Mounting Location: Top or bottom</li>
<li>Mounting Support: On circuit breaker</li>
<li>Product Destination: Switchboard</li>
<li>Event Management: Voltage loss with measured current at voltage loss</li>
<li>Transmission Support Medium: Radio frequency 2.4…2.4835 GHz conforming to IEEE 802.15.4</li>
<li>Emission Power: 10 mW</li>
<li>Mounting Mode: By screws (terminals)</li>
<li>Electrical Connection (Voltage Sensing &amp; Power Supply): Connector tooth and wire</li>
<li>Cable Cross Section:</li>
<ul>
<li>1 rigid cable: 1.5…16 mm²</li>
<li>2 stranded cable: 1.5…2.5 mm²</li>
<li>2 rigid cable: 1.5…2.5 mm²</li>
<li>1 stranded cable: 1.5…16 mm²</li>
</ul>
<li>Cable Length: 1 m</li>
<li>Supply Voltage: 200...240 V AC, +/- 20 %</li>
<li>Cable Composition: 1 x 0.33 mm²</li>
<li>Network Frequency: 50 Hz, 60 Hz</li>
<li>Maximum Power Consumption: 1 VA</li>
<li>Standards:</li>
<ul>
<li>IEC 61557-12</li>
<li>IEC 61010-1</li>
<li>IEC 61010-2-030</li>
<li>IEC 61326-1</li>
<li>ETSI EN 300 328</li>
<li>ETSI EN 301 487-1</li>
</ul>
<li>Height: 16.5 mm</li>
<li>Width: 18 mm</li>
<li>Depth: 43 mm</li>
<li>Net Weight: 16.4 g</li>
<li>Colour: White (RAL 9003)</li>
<li>Quality Labels: CE</li>
<li>Directives: 2014/53/EU - Radio Equipment Directive</li>
<li>Operating Altitude: 0...2000 m</li>
<li>Ambient Air Temperature for Operation: -25…60 °C</li>
<li>Ambient Air Temperature for Storage: -40…85 °C</li>
<li>Overvoltage Category: III conforming to IEC 61010-1</li>
<li>Measurement Category: Category III conforming to IEC 61010-2-030</li>
<li>IP Degree of Protection: IP20 conforming to IEC 60529</li>
<li>IK Degree of Protection: IK05</li>
<li>Pollution Degree: 3</li>
<li>Relative Humidity: 0…95 % at 45 °C conforming to IEC 60721-3-3</li>
<li>Vibration Resistance: 3M4 conforming to IEC 60721-3-3</li>
<li>Electromagnetic Compatibility:</li>
<ul>
<li>Industrial electromagnetic environment conforming to IEC 61326-1</li>
<li>Radiated EMC conforming to ETSI EN 301 489-17</li>
<li>Electromagnetic emission conforming to IEC 62311</li>
</ul>
<li>Environmental Characteristics:</li>
</ul>
Dustproof Class: 3S3 conforming to IEC 60721-3-3
Salt Mist Class: 3C2 conforming to IEC 60721-3-3
Indoor Use

schneider electric a9mem1520 powertag acti9 monoconnect 1p+w top bottom position max 63a energy sensor posisi atas dan bawah energi maks monitoring devices kedudukan penderia tenaga electric/施耐德电气 顶部和底部位置最大 能量传感器 施耐德电气

schneider-electric-a9mem1520-powertag-acti9-monoconnect-1p-w-top-and-bottom-position-max-63a-energy-sensor

Bore diameter 60 mmOuter diameter 130 mmOverall width 46 mmBore type CylindricalCage material SteelPrecision class Class normal (P0)Radial internal clearance C3Weight (kg) 3.060000

Bore diameter 60 mm
Outer diameter 130 mm
Overall width 46 mm
Bore type Cylindrical
Cage material Steel
Precision class Class normal (P0)
Radial internal clearance C3
Weight (kg) 3.060000