SCHNEIDER ELECTRIC

Mechanical Parts

mechanical-parts

Electric Motors

electric-motors

Engineering Materials & Industrial Hardware

engineering-materials-industrial-hardware

Motor Accessories

motor-accessories

Electricals

electricals

Servo Motors

servo-motors

RS Pro

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Junction & Enclosure Box

Electrical Wire 

Button Switch

RS Components ETH SG

buyerIntroduction

Schneider Electric BCH2MM0313CA6C 220 V 300 W Servo Motor, 3000 Rpm, 2.86 Nm Max Output Torque, 22mm Shaft Diameter

schneider electric bch2mm0313ca6c 220 300 servo motor, 3000 rpm, 2.86 nm max output torque, 22mm shaft diameter motor servo, torsi maks 2,86 nm, poros motors tork aci electric/施耐德电气 伺服电机，3000 rpm，2.86 最大输出扭矩，22mm 轴径 施耐德电气

schneider-electric-bch2mm0313ca6c-220-v-300-w-servo-motor-3000-rpm-2-86-nm-max-output-torque-22mm-shaft-diameter

Schneider Electric VW3M5101R300 Cable for Use With Servo Motor Bdh, Servo Motor Bmh, Servo Motor Brh, Servo Motor Bsh, 30m Length

schneider electric vw3m5101r300 cable use servo motor bdh, bmh, brh, bsh, 30m length kabel untuk digunakan dengan panjang accessories electric/施耐德电气 电缆，用于伺服电机 bdh、伺服电机 bmh、伺服电机 brh、伺服电机 bsh，长度 30 施耐德电气

schneider-electric-vw3m5101r300-cable-for-use-with-servo-motor-bdh-servo-motor-bmh-servo-motor-brh-servo-motor-bsh-30m-length

Schneider Electric LXM28EU04M3X Motion Servo Drive, Lexium 28, Single and Three Phase, 200 to 240V, 400W, Ethercat

 
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated EtherCAT interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase/single phase), an output current of 2.6A, nominal power of 400W and continuous power of 400W. It is furnished with spring terminal electrical connection and RJ45 connectors (CN4) for EtherCAT. There is an electrical isolation between power and control. It offers EtherCAT communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 146mm (depth) x 150mm (height). It weighs 1kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (60mm, 2 motor stacks) at 400W and servo motor (130mm, 1 motor stack) at 300W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.  

Product or Component Type: Motion Servo Drive

Network Number of Phases: Single or Three Phases

Continuous Output Current: 2.6 A at 16 kHz

Nominal Power: 0.4 kW at 220 V, 16 kHz Switching Frequency

Electrical Isolation: Between Power and Control

Type of Cable: Shielded Motor Cable (Temperature: 0…55 °C), Copper

Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (L1-L2)

Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (R, S, T)

Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (U, V, W, PE)

Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)

Discrete Input Voltage: 24 V DC for Logic

Discrete Input Logic: Positive or Negative (CN1)

Discrete Output Logic: Positive or Negative (CN1)

Control Signal Type: Servo Motor Encoder Feedback CN2

Safety Function: STO (Safe Torque Off), Integrated

PL d/category 3 conforming to ISO 13849-1: 2008

Communication Interface: EtherCAT, Integrated

Transmission Rate: 100 Mbit/s for EtherCAT

Physical Interface: RS485 for Modbus Serial Line Slave

Status LED: 1 LED (Red) DC Bus Energized, 1 LED (Multi-colour) N.RUN, 1 LED (Multi-colour) N.ERR, 2 LEDs (Green) Link (Link Status), 2 LEDs (Yellow) Activity

Signalling Function: Servo Status and Fault Codes, Five 7-Segment Display Units

Servo Motor BCH2 (60 mm, 2 Motor Stacks) at 400 W

Servo Motor (80 mm, 1 Motor Stack) at 400 W

Servo Motor (130 mm, 1 Motor Stack) at 300 W

Electromagnetic Compatibility: Conducted Emission - Test Level: Level 3 Category C3 Conforming to IEC 61800-3

Vibration Resistance: 3M4 Amplitude = 3 mm (f = 9…200 Hz) Conforming to IEC 60721-3-3

Shock Resistance: 10 gn, Type I Conforming to IEC 60721-3-3

Relative Humidity: 5…95% without Condensation

<h3 class="md-block-header-three">Schneider Electric LXM28EU04M3X Motion Servo Drive, Lexium 28, Single and Three Phase, 200 to 240V, 400W, Ethercat</h3> This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated EtherCAT interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase/single phase), an output current of 2.6A, nominal power of 400W and continuous power of 400W. It is furnished with spring terminal electrical connection and RJ45 connectors (CN4) for EtherCAT. There is an electrical isolation between power and control. It offers EtherCAT communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 146mm (depth) x 150mm (height). It weighs 1kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (60mm, 2 motor stacks) at 400W and servo motor (130mm, 1 motor stack) at 300W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines. Main:<ul class="md-block-unordered-list-item"><li>Range of Product: Lexium 28</li><li>Device Short Name: LXM28E</li><li>Product or Component Type: Motion Servo Drive</li><li>Format of the Drive: Compact Housing</li><li>Line Current:</li><ul class="md-block-unordered-list-item"><li>3.8 A 211.6% at 220 V, Single Phase</li><li>3.8 A 183.7% at 220 V, Three Phase</li></ul><li>Network Number of Phases: Single or Three Phases</li><li>[Us] Rated Supply Voltage:</li><ul class="md-block-unordered-list-item"><li>200...240 V (-10...15%) for Three Phase</li><li>200...240 V (-20...15%) for Single Phase</li></ul><li>Supply Voltage Limits:</li><ul class="md-block-unordered-list-item"><li>200…255 V Three Phase</li><li>170…255 V Single Phase</li></ul><li>Supply Frequency: 50/60 Hz (-5...5%)</li><li>Network Frequency: 47.5...63 Hz</li><li>EMC Filter: Without EMC Filter</li><li>Continuous Output Current: 2.6 A at 16 kHz</li><li>Output Current 3s Peak: 7.8 A at 220 V</li><li>Continuous Power: 400 W at 220 V</li><li>Nominal Power: 0.4 kW at 220 V, 16 kHz Switching Frequency</li><li>Overvoltage Category: III</li><li>Maximum Leakage Current: 1.3 mA</li><li>Output Voltage: &lt;= Power Supply Voltage</li><li>Electrical Isolation: Between Power and Control</li><li>Type of Cable: Shielded Motor Cable (Temperature: 0…55 °C), Copper</li><li>Electrical Connection:</li><ul class="md-block-unordered-list-item"><li>Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (L1-L2)</li><li>Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (R, S, T)</li><li>Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (U, V, W, PE)</li><li>Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)</li></ul><li>Discrete Input Number:</li><ul class="md-block-unordered-list-item"><li>8 Programmable (CN1)</li><li>2 Fast Capture (CN1)</li><li>1 Safety Function STO (CN9)</li></ul><li>Discrete Input Voltage: 24 V DC for Logic</li><li>Discrete Input Logic: Positive or Negative (CN1)</li><li>Discrete Output Number:</li><ul class="md-block-unordered-list-item"><li>5 Logic Output (CN1) at 12...24 V DC</li><li>1 Pulse Train Output (PTO) (CN1)</li></ul><li>Discrete Output Voltage: 12...24 V DC</li><li>Discrete Output Logic: Positive or Negative (CN1)</li><li>Control Signal Type: Servo Motor Encoder Feedback CN2</li><li>Protection Type: </li><ul class="md-block-unordered-list-item"><li>Against reverse polarity: inputs signal</li><li>Against short-circuits: outputs signal</li><li>Overcurrent: motor</li><li>Overvoltage: motor</li><li>Undervoltage: motor</li><li>Overheating: motor</li><li>Overload: motor</li><li>Overspeed: motor </li></ul><li>Safety Function: STO (Safe Torque Off), Integrated</li><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>SIL 2 conforming to IEC 61800-5-2: 2007</li><li>SIL 2 conforming to IEC 61508-1: 2010</li><li>PL d/category 3 conforming to ISO 13849-1: 2008</li><li>SIL 2 conforming to ISO 13849-1: 2009/AC</li><li>SIL 2 conforming to IEC 60204-1: 2006</li><li>SIL 2 conforming to IEC 60204-1: 2009/A1</li><li>SIL 2 conforming to IEC 60204-1: 2010/AC</li><li>SIL 2 conforming to IEC 62061: 2012 </li></ul><li>Communication Interface: EtherCAT, Integrated</li><li>Connector Type: RJ45 (CN4) for EtherCAT</li><li>Method of Access: Slave</li><li>Transmission Rate: 100 Mbit/s for EtherCAT</li><li>Physical Interface: RS485 for Modbus Serial Line Slave</li><li>Status LED: 1 LED (Red) DC Bus Energized, 1 LED (Multi-colour) N.RUN, 1 LED (Multi-colour) N.ERR, 2 LEDs (Green) Link (Link Status), 2 LEDs (Yellow) Activity</li><li>Signalling Function: Servo Status and Fault Codes, Five 7-Segment Display Units</li><li>Marking: CE, CULus</li><li>Type of Cooling: Fan</li><li>Operating Position: Vertical</li><li>Product Compatibility:</li><ul class="md-block-unordered-list-item"><li>Servo Motor BCH2 (60 mm, 2 Motor Stacks) at 400 W</li><li>Servo Motor (80 mm, 1 Motor Stack) at 400 W</li><li>Servo Motor (130 mm, 1 Motor Stack) at 300 W</li></ul><li>Width: 55 mm</li><li>Height: 150 mm</li><li>Depth: 146 mm</li><li>Net Weight: 1 kg</li></ul>Environment:<ul class="md-block-unordered-list-item"><li>Electromagnetic Compatibility: Conducted Emission - Test Level: Level 3 Category C3 Conforming to IEC 61800-3</li><li>Standards: IEC 61800-5-1</li><li>Product Certifications: CE, CSA, CULus</li><li>IP Degree of Protection: IP20</li><li>Vibration Resistance: 3M4 Amplitude = 3 mm (f = 9…200 Hz) Conforming to IEC 60721-3-3</li><li>Shock Resistance: 10 gn, Type I Conforming to IEC 60721-3-3</li><li>Relative Humidity: 5…95% without Condensation</li><li>Ambient Air Temperature:</li><ul class="md-block-unordered-list-item"><li>For Operation: 0…55 °C</li><li>For Storage: -25…65 °C</li></ul><li>Operating Altitude:</li><ul class="md-block-unordered-list-item"><li>&lt;= 1000 m without Derating</li><li>&gt; 1000...2000 m 1% per 100 m</li></ul></ul>

<h3>Schneider Electric LXM28EU04M3X Motion Servo Drive, Lexium 28, Single and Three Phase, 200 to 240V, 400W, Ethercat</h3>
&nbsp; 
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated EtherCAT interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase/single phase), an output current of 2.6A, nominal power of 400W and continuous power of 400W. It is furnished with spring terminal electrical connection and RJ45 connectors (CN4) for EtherCAT. There is an electrical isolation between power and control. It offers EtherCAT communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 146mm (depth) x 150mm (height). It weighs 1kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (60mm, 2 motor stacks) at 400W and servo motor (130mm, 1 motor stack) at 300W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.&nbsp;&nbsp;
Main:
<ul>
<li>Range of Product: Lexium 28</li>
<li>Device Short Name: LXM28E</li>
<li>Product or Component Type: Motion Servo Drive</li>
<li>Format of the Drive: Compact Housing</li>
<li>Line Current:</li>
<ul>
<li>3.8 A 211.6% at 220 V, Single Phase</li>
<li>3.8 A 183.7% at 220 V, Three Phase</li>
</ul>
<li>Network Number of Phases: Single or Three Phases</li>
<li>[Us] Rated Supply Voltage:</li>
<ul>
<li>200...240 V (-10...15%) for Three Phase</li>
<li>200...240 V (-20...15%) for Single Phase</li>
</ul>
<li>Supply Voltage Limits:</li>
<ul>
<li>200…255 V Three Phase</li>
<li>170…255 V Single Phase</li>
</ul>
<li>Supply Frequency: 50/60 Hz (-5...5%)</li>
<li>Network Frequency: 47.5...63 Hz</li>
<li>EMC Filter: Without EMC Filter</li>
<li>Continuous Output Current: 2.6 A at 16 kHz</li>
<li>Output Current 3s Peak: 7.8 A at 220 V</li>
<li>Continuous Power: 400 W at 220 V</li>
<li>Nominal Power: 0.4 kW at 220 V, 16 kHz Switching Frequency</li>
<li>Overvoltage Category: III</li>
<li>Maximum Leakage Current: 1.3 mA</li>
<li>Output Voltage: &lt;= Power Supply Voltage</li>
<li>Electrical Isolation: Between Power and Control</li>
<li>Type of Cable: Shielded Motor Cable (Temperature: 0…55 °C), Copper</li>
<li>Electrical Connection:</li>
<ul>
<li>Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (L1-L2)</li>
<li>Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (R, S, T)</li>
<li>Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (U, V, W, PE)</li>
<li>Spring Terminal, Clamping Capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)</li>
</ul>
<li>Discrete Input Number:</li>
<ul>
<li>8 Programmable (CN1)</li>
<li>2 Fast Capture (CN1)</li>
<li>1 Safety Function STO (CN9)</li>
</ul>
<li>Discrete Input Voltage: 24 V DC for Logic</li>
<li>Discrete Input Logic: Positive or Negative (CN1)</li>
<li>Discrete Output Number:</li>
<ul>
<li>5 Logic Output (CN1) at 12...24 V DC</li>
<li>1 Pulse Train Output (PTO) (CN1)</li>
</ul>
<li>Discrete Output Voltage: 12...24 V DC</li>
<li>Discrete Output Logic: Positive or Negative (CN1)</li>
<li>Control Signal Type: Servo Motor Encoder Feedback CN2</li>
<li>Protection Type:&nbsp;&nbsp;</li>
<ul>
<li>Against reverse polarity: inputs signal</li>
<li>Against short-circuits: outputs signal</li>
<li>Overcurrent: motor</li>
<li>Overvoltage: motor</li>
<li>Undervoltage: motor</li>
<li>Overheating: motor</li>
<li>Overload: motor</li>
<li>Overspeed: motor&nbsp;</li>
</ul>
<li>Safety Function: STO (Safe Torque Off), Integrated</li>
<li>Safety Level:</li>
<ul>
<li>SIL 2 conforming to IEC 61800-5-2: 2007</li>
<li>SIL 2 conforming to IEC 61508-1: 2010</li>
<li>PL d/category 3 conforming to ISO 13849-1: 2008</li>
<li>SIL 2 conforming to ISO 13849-1: 2009/AC</li>
<li>SIL 2 conforming to IEC 60204-1: 2006</li>
<li>SIL 2 conforming to IEC 60204-1: 2009/A1</li>
<li>SIL 2 conforming to IEC 60204-1: 2010/AC</li>
<li>SIL 2 conforming to IEC 62061: 2012&nbsp;</li>
</ul>
<li>Communication Interface: EtherCAT, Integrated</li>
<li>Connector Type: RJ45 (CN4) for EtherCAT</li>
<li>Method of Access: Slave</li>
<li>Transmission Rate: 100 Mbit/s for EtherCAT</li>
<li>Physical Interface: RS485 for Modbus Serial Line Slave</li>
<li>Status LED: 1 LED (Red) DC Bus Energized, 1 LED (Multi-colour) N.RUN, 1 LED (Multi-colour) N.ERR, 2 LEDs (Green) Link (Link Status), 2 LEDs (Yellow) Activity</li>
<li>Signalling Function: Servo Status and Fault Codes, Five 7-Segment Display Units</li>
<li>Marking: CE, CULus</li>
<li>Type of Cooling: Fan</li>
<li>Operating Position: Vertical</li>
<li>Product Compatibility:</li>
<ul>
<li>Servo Motor BCH2 (60 mm, 2 Motor Stacks) at 400 W</li>
<li>Servo Motor (80 mm, 1 Motor Stack) at 400 W</li>
<li>Servo Motor (130 mm, 1 Motor Stack) at 300 W</li>
</ul>
<li>Width: 55 mm</li>
<li>Height: 150 mm</li>
<li>Depth: 146 mm</li>
<li>Net Weight: 1 kg</li>
</ul>
Environment:
<ul>
<li>Electromagnetic Compatibility: Conducted Emission - Test Level: Level 3 Category C3 Conforming to IEC 61800-3</li>
<li>Standards: IEC 61800-5-1</li>
<li>Product Certifications: CE, CSA, CULus</li>
<li>IP Degree of Protection: IP20</li>
<li>Vibration Resistance: 3M4 Amplitude = 3 mm (f = 9…200 Hz) Conforming to IEC 60721-3-3</li>
<li>Shock Resistance: 10 gn, Type I Conforming to IEC 60721-3-3</li>
<li>Relative Humidity: 5…95% without Condensation</li>
<li>Ambient Air Temperature:</li>
<ul>
<li>For Operation: 0…55 °C</li>
<li>For Storage: -25…65 °C</li>
</ul>
<li>Operating Altitude:</li>
<ul>
<li>&lt;= 1000 m without Derating</li>
<li>&gt; 1000...2000 m 1% per 100 m</li>
</ul>
</ul>

Product Datasheet

User guide

Catalogue

Environmental disclosure

APC by Schneider Electric

CLIPSAL

Square D

Telemecanique

Pilot Lights

Light Switches

Miniature Circuit Breakers - MCBs

Uninterruptible Power Supply 

Molded Case Circuit Breakers - MCCBs

EasyPact Circuit Breakers 

Standby battery 

Overload Relays

Schneider

schneider electric lxm28eu04m3x motion servo drive, lexium 28, single three phase, 200 240v, 400w, ethercat fase tunggal dan tiga, hingga motors motor listrik tiga fasa, elektrik electric/施耐德电气 运动伺服驱动器，lexium 28，单相和三相，200 240v，400w，ethercat 电动马达 施耐德电气