Shopping List
Shopping List
AUD - AU$
Image
/
/
/
/
Schneider Electric A9D52632 Residual Current Breaker With Overcurrent Protection (rcbo), Acti9 Idpn N Vigi, 1P+N, 32A, C Curve, 6000A, a Type, 100mA
Schneider Electric A9D52632 Residual Current Breaker With Overcurrent Protection (rcbo), Acti9 Idpn N Vigi, 1P+N, 32A, C Curve, 6000A, a Type, 100mA
Image
Image
Specifications
Please select at least one specification below.
[In] Rated Current
32 A
Earth-leakage Sensitivity
100 mA
[Ics] Rated Service Breaking Capacity
6000 A 100 % x Icn at 220...240 V AC 50 Hz conforming to EN/IEC 61009-2-1
Ambient Air Temperature for Operation
-25…60 °C
[Ue] Rated Operational Voltage
220...240 V AC 50 Hz
Colour
White
This spec is not available in the specification table.
Width
36 mm
This spec is not available in the specification table.
Trip Unit Technology
Thermal-magnetic
This spec is not available in the specification table.
Control Type
Toggle
This spec is not available in the specification table.
Device Short Name
iDPN N Vigi
This spec is not available in the specification table.
Product or Component Type
Residual current breaker with overcurrent protection (RCBO)
This spec is not available in the specification table.
Range
Acti9
This spec is not available in the specification table.
Product Name
Acti9 iDPN Vigi
This spec is not available in the specification table.
Depth
73 mm
This spec is not available in the specification table.
Device Application
Distribution
This spec is not available in the specification table.
Poles Description
1P + N
This spec is not available in the specification table.
Network type
AC
This spec is not available in the specification table.
Connection Pitch
9 mm between phase and neutral
This spec is not available in the specification table.
Number of Protected Poles
1
This spec is not available in the specification table.
Neutral Position
Left
This spec is not available in the specification table.
Mounting Mode
Clip-on
This spec is not available in the specification table.
Curve Code
C
This spec is not available in the specification table.
Breaking capacity
6000 A Icn at 220...240 V AC 50 Hz conforming to EN/IEC 61009-2-1
This spec is not available in the specification table.
Network Frequency
50 Hz
This spec is not available in the specification table.
Suitability for Isolation
Yes conforming to EN/IEC 60947-2
This spec is not available in the specification table.
Standards
EN/IEC 61009-2-1
This spec is not available in the specification table.
Magnetic Tripping Limit
5...10 x In
This spec is not available in the specification table.
Limitation Class
3 conforming to EN/IEC 61009-2-1
This spec is not available in the specification table.
[Ui] Rated Insulation Voltage
400 V AC 50 Hz
This spec is not available in the specification table.
[Uimp] Rated Impulse Withstand Voltage
4 kV
This spec is not available in the specification table.
Contact Position Indicator
Yes
This spec is not available in the specification table.
Mounting Support
DIN rail
This spec is not available in the specification table.
Local Signalling
ON, OFF, fault trip
This spec is not available in the specification table.
Connections - Terminals
Single terminal top or bottom 1…16 mm² rigid Single terminal top or bottom 1…10 mm² flexible Single terminal top or bottom 1…10 mm² flexible with ferrule
This spec is not available in the specification table.
Overvoltage Category
III conforming to IEC 60364
This spec is not available in the specification table.
Comb Busbar and Distribution Block Compatibility
Top or bottom: YES
This spec is not available in the specification table.
9 mm Pitches
4
This spec is not available in the specification table.
Product certifications
VDE
This spec is not available in the specification table.
Height
85 mm
This spec is not available in the specification table.
IP Degree of Protection
IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
This spec is not available in the specification table.
Pollution Degree
3
This spec is not available in the specification table.
Relative Humidity
95 % at 55 °C
This spec is not available in the specification table.
Mechanical Durability
20000 cycles
This spec is not available in the specification table.
Ambient Air Temperature for Storage
-40…85 °C
This spec is not available in the specification table.
Electrical Durability
10000 cycles
This spec is not available in the specification table.
Wire Stripping Length
15 mm for top or bottom connection
This spec is not available in the specification table.
Tightening Torque
2 N.m top or bottom
This spec is not available in the specification table.
Earth-Leakage Protection
Integrated
This spec is not available in the specification table.
Tropicalisation
2 conforming to IEC 60068-1
This spec is not available in the specification table.
Electromagnetic Compatibility
8/20 µs impulse withstand, 250 A conforming to EN/IEC 61009-2-1
This spec is not available in the specification table.
earth-leakage protection time delay
Instantaneous
This spec is not available in the specification table.
Earth-leakage protection class
Type A
This spec is not available in the specification table.
Residual current tripping technology
Voltage independent
This spec is not available in the specification table.
Rated breaking and making capacity
Idm 6000 A at 220...240 V AC 50 Hz conforming to EN/IEC 61009-2-1
This spec is not available in the specification table.
Locking Options Description
Padlocking device
This spec is not available in the specification table.
Complementary
Outgoer
This spec is not available in the specification table.
Product Description
AU $ 212.00
Quantity:
EA
This item is sold by
Image
Schneider Electric
0
Highly Matched Items
View items that have the same or are a close match to the specifications of this item
Residual Current Breaker with Overcurrent Protections - RCBOs from SCHNEIDER ELECTRIC
Source & compare similar products
More from Residual Current Breaker with Overcurrent Protections - RCBOs
Expand your search with a wider selection
Recently Viewed Products
Compare & Refer to previously viewed items
Image
Top