OMCN

Lifting Equipments

lifting-equipments

Hydraulic Jacks

hydraulic-jacks

Hydraulic Machinery & Equipment

hydraulic-machinery-equipment

Hydraulic Tools

hydraulic-tools

Office & School Consumables

office-school-consumables

Office Furniture

office-furniture

Machinery

machinery

Other Machines

other-machines

OMCN Hydraulic Pipe Bender HB-RAPID-T10M-EM

The motor-driven pipe bending machines RAPID T10/M fitted with silent  electrohydraulic gearbox, remote-controlled by a two-way distributor,  are practical indeed for the special accuracy with which they have been  designed.

The gearbox with radiant pistons is complete with a  limit valve that enables an automatic oil discharge once the maximum  stress has been reached, keeping the working pressure inalterated. Each  one of these models is also fitted with a sturdy two-storey working  table.

The hydraulic gearbox is placed on the lower storey, while the pipe-bending machine is placed on the upper storey.

The absolute newness of the RAPID T10/M is represented by the fact that they can be used also by hand if needed.

The same are suitable to bend gas and water pipes without welding, of medium thickness from 3/8” up to 6”.

CE approved with electromagnetic compatibility.

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Hydraulic Pipe Bender HB-RAPID-T10M-EM</strong></h3><h3 class="md-block-header-three">Features :</h3><ul class="md-block-unordered-list-item"><li>The motor-driven pipe bending machines RAPID T10/M fitted with silent  electrohydraulic gearbox, remote-controlled by a two-way distributor,  are practical indeed for the special accuracy with which they have been  designed.</li><li>The gearbox with radiant pistons is complete with a  limit valve that enables an automatic oil discharge once the maximum  stress has been reached, keeping the working pressure inalterated. Each  one of these models is also fitted with a sturdy two-storey working  table.</li><li>The hydraulic gearbox is placed on the lower storey, while the pipe-bending machine is placed on the upper storey.</li><li>The absolute newness of the RAPID T10/M is represented by the fact that they can be used also by hand if needed.</li><li>The same are suitable to bend gas and water pipes without welding, of medium thickness from 3/8” up to 6”.</li><li>CE approved with electromagnetic compatibility.</li></ul>

<h3><strong>OMCN Hydraulic Pipe Bender HB-RAPID-T10M-EM</strong></h3>
<h3>Features :</h3>
<ul>
<li>The motor-driven pipe bending machines RAPID T10/M fitted with silent  electrohydraulic gearbox, remote-controlled by a two-way distributor,  are practical indeed for the special accuracy with which they have been  designed.</li>
<li>The gearbox with radiant pistons is complete with a  limit valve that enables an automatic oil discharge once the maximum  stress has been reached, keeping the working pressure inalterated. Each  one of these models is also fitted with a sturdy two-storey working  table.</li>
<li>The hydraulic gearbox is placed on the lower storey, while the pipe-bending machine is placed on the upper storey.</li>
<li>The absolute newness of the RAPID T10/M is represented by the fact that they can be used also by hand if needed.</li>
<li>The same are suitable to bend gas and water pipes without welding, of medium thickness from 3/8” up to 6”.</li>
<li>CE approved with electromagnetic compatibility.</li>
</ul>


Joey Lim

METABO

Telwin

Huanhu TLP

West Lake Machine

Others

Seals

COMEUP WINCH

ALLMAN

Winches, Hoists & Spring Balancers

Welders

Drilling Machines

Power Tool Batteries & Chargers

Drills, Impact Drivers & Wrenches

Grinders

Cutting & Sawing Machines

Air Compressors & Inflators

buyerIntroduction

Omcn Hydraulic Pipe Bender HB-RAPID-T10M-EM

omcn hydraulic pipe bender hb-rapid-t10m-em pipa hidrolik machines mesin lainnya lain-lain 欧姆龙液压弯管机hb-rapid-t10m-em 其他机器

omcn-hydraulic-pipe-bender-hb-rapid-t10m-em

OMCN Hydraulic Pipe Bender HB-RAPID-T10M-DM

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Hydraulic Pipe Bender HB-RAPID-T10M-DM</strong></h3><ul class="md-block-unordered-list-item"><li>The motor-driven pipe bending machines RAPID T10/M fitted with silent  electrohydraulic gearbox, remote-controlled by a two-way distributor,  are practical indeed for the special accuracy with which they have been  designed.</li><li>The gearbox with radiant pistons is complete with a  limit valve that enables an automatic oil discharge once the maximum  stress has been reached, keeping the working pressure inalterated. Each  one of these models is also fitted with a sturdy two-storey working  table.</li><li>The hydraulic gearbox is placed on the lower storey, while the pipe-bending machine is placed on the upper storey.</li><li>The absolute newness of the RAPID T10/M is represented by the fact that they can be used also by hand if needed.</li><li>The same are suitable to bend gas and water pipes without welding, of medium thickness from 3/8” up to 6”.</li><li>CE approved with electromagnetic compatibility.</li></ul>

<h3><strong>OMCN Hydraulic Pipe Bender HB-RAPID-T10M-DM</strong></h3>
<ul>
<li>The motor-driven pipe bending machines RAPID T10/M fitted with silent  electrohydraulic gearbox, remote-controlled by a two-way distributor,  are practical indeed for the special accuracy with which they have been  designed.</li>
<li>The gearbox with radiant pistons is complete with a  limit valve that enables an automatic oil discharge once the maximum  stress has been reached, keeping the working pressure inalterated. Each  one of these models is also fitted with a sturdy two-storey working  table.</li>
<li>The hydraulic gearbox is placed on the lower storey, while the pipe-bending machine is placed on the upper storey.</li>
<li>The absolute newness of the RAPID T10/M is represented by the fact that they can be used also by hand if needed.</li>
<li>The same are suitable to bend gas and water pipes without welding, of medium thickness from 3/8” up to 6”.</li>
<li>CE approved with electromagnetic compatibility.</li>
</ul>


Omcn Hydraulic Pipe Bender HB-RAPID-T10M-DM

omcn hydraulic pipe bender hb-rapid-t10m-dm pipa hidrolik machines mesin lainnya lain-lain 欧姆龙液压弯管机hb-rapid-t10m-dm 其他机器

omcn-hydraulic-pipe-bender-hb-rapid-t10m-dm

 Twelve models with different capacities  from 3 to 50 tons. 

 Oversized structure made of very resistant  steel: the most solid on the market. 

 Safety valve to avoid any possible overload. 

 The heaviest models are equipped with  a handle to ease transport. 

 Quick and precise approach under the  lifting points by screw  (except art. 125 – 125/A – 130/A) 

<p class="md-block-unstyled"> Technical and structural lay-out </p><ul class="md-block-unordered-list-item"><li> Twelve models with different capacities  from 3 to 50 tons. </li><li> Oversized structure made of very resistant  steel: the most solid on the market. </li><li> Big base for the best stability. </li><li> Safety valve to avoid any possible overload. </li><li> The heaviest models are equipped with  a handle to ease transport. </li><li> Quick and precise approach under the  lifting points by screw  (except art. 125 – 125/A – 130/A) </li></ul>

<p>&nbsp;Technical and structural lay-out&nbsp;</p>
<ul>
<li>&nbsp;Twelve models with different capacities  from 3 to 50 tons.&nbsp;</li>
<li>&nbsp;Oversized structure made of very resistant  steel: the most solid on the market.&nbsp;</li>
<li>&nbsp;Big base for the best stability.&nbsp;</li>
<li>&nbsp;Safety valve to avoid any possible overload.&nbsp;</li>
<li>&nbsp;The heaviest models are equipped with  a handle to ease transport.&nbsp;</li>
<li>&nbsp;Quick and precise approach under the  lifting points by screw  (except art. 125 – 125/A – 130/A)&nbsp;</li>
</ul>


Specification

Omcn 15 Ton Bottle Jack BJ-ART128

omcn 15 ton bottle jack bj-art128 botol hydraulic tools alat hidrolik bicu tan peralatan hidraulik 吨瓶千斤顶

omcn-15-ton-bottle-jack-bj-art128

Omcn 30 Ton Bottle Jack BJ-ART130

omcn 30 ton bottle jack bj-art130 botol hydraulic tools alat hidrolik bicu tan peralatan hidraulik 吨瓶千斤顶

omcn-30-ton-bottle-jack-bj-art130

Equipped with double frontal balancing rolls and rear turning

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Hydraulic Trolley Jack Art.3010</strong></h3><h3 class="md-block-header-three">Features : </h3><ul class="md-block-unordered-list-item"><li>Completely innovative design.</li><li>Very low profile.</li><li>Ergonomic handle.</li><li>Support holder with a wide base.</li><li>Rubber-covered support.</li></ul><h3 class="md-block-header-three">Technical Data : </h3><ul class="md-block-unordered-list-item"><li>Model: Art.3010   </li><li>Equipped with double frontal balancing rolls and rear turning</li><li>Foot descent-control</li></ul>

<h3><strong>OMCN Hydraulic Trolley Jack Art.3010</strong></h3>
<h3>Features :&nbsp;</h3>
<ul>
<li>Completely innovative design.</li>
<li>Very low profile.</li>
<li>Ergonomic handle.</li>
<li>Support holder with a wide base.</li>
<li>Rubber-covered support.</li>
</ul>
<h3>Technical Data :&nbsp;</h3>
<ul>
<li>Model: Art.3010&nbsp;&nbsp;&nbsp;</li>
<li>Equipped with double frontal balancing rolls and rear turning</li>
<li>Foot descent-control</li>
</ul>


Tech Spec

Omcn 2 Ton Hydraulic Garage Trolley Jack ( Low Profile 95MM - Closed Height ) Art 3010

omcn ton hydraulic garage trolley jack low profile 95mm closed height art 3010 (profil rendah tinggi tertutup) jacks dongkrak hidrolik tan hidraulik troli profil ketinggian tertutup bicu hydraulik 吨液压车库手推车千斤顶（薄型 95 毫米 闭合高度）艺术 液压千斤顶

omcn-2-ton-hydraulic-garage-trolley-jack-low-profile-95mm-closed-height-art-3010

 OMCN Hydraulic Manual Pipe Bender (3/8″ -4″ Cap) RAPID/T10-E

The pipe bending machines RAPID T10 with sliding top plate and constant reading lower plate cold-bend gas and water pipes, without welding, UNI EN10255 (BS1387- UNI3824).

3/8”, 1/2”, 3/4”, 1”, 1”1/4, 1”1/2, 2”, 2”1/2, 3”, 4”

<h3 class="md-block-header-three"> <strong class="md-inline-bold">OMCN Hydraulic Manual Pipe Bender (3/8″ -4″ Cap) RAPID/T10-E</strong></h3><p class="md-block-unstyled">The pipe bending machines RAPID T10 with sliding top plate and constant reading lower plate cold-bend gas and water pipes, without welding, UNI EN10255 (BS1387- UNI3824).</p><p class="md-block-unstyled"><strong class="md-inline-bold">Supplied forms:</strong></p><p class="md-block-unstyled">3/8”, 1/2”, 3/4”, 1”, 1”1/4, 1”1/2, 2”, 2”1/2, 3”, 4”</p><p class="md-block-unstyled">metalworking machines</p>

<h3>&nbsp;<strong>OMCN Hydraulic Manual Pipe Bender (3/8″ -4″ Cap) RAPID/T10-E</strong></h3>
<p>The pipe bending machines RAPID T10 with sliding top plate and constant reading lower plate cold-bend gas and water pipes, without welding, UNI EN10255 (BS1387- UNI3824).</p>
<p><strong>Supplied forms:</strong></p>
<p>3/8”, 1/2”, 3/4”, 1”, 1”1/4, 1”1/2, 2”, 2”1/2, 3”, 4”</p>
<p>metalworking machines</p>


Omcn 3/8" - 4" Hydraulic Pipe Bender C/W 10 Formers (italy)

omcn 3/8" 4" hydraulic pipe bender c/w 10 formers (italy) penyok pipa hidrolik pembentuk (italia) machines mesin lainnya paip hidraulik bekas lain-lain 液压弯管机 成型机（意大利） 其他机器

omcn-3-8-4-hydraulic-pipe-bender-c-w-10-formers-italy

<h3 class="md-block-header-three"> <strong class="md-inline-bold">OMCN Hydraulic Manual Pipe Bender (3/8″ -4″ Cap) RAPID/T10-E</strong></h3><p class="md-block-unstyled">The pipe bending machines RAPID T10 with sliding top plate and constant reading lower plate cold-bend gas and water pipes, without welding, UNI EN10255 (BS1387- UNI3824).</p><p class="md-block-unstyled"><strong class="md-inline-bold">Supplied forms:</strong></p><p class="md-block-unstyled"> 2&quot;,2 1/2&quot;, 3&quot;, 4&quot;,5&quot;&amp;6&quot;.</p><p class="md-block-unstyled">metalworking machines</p>

<h3>&nbsp;<strong>OMCN Hydraulic Manual Pipe Bender (3/8″ -4″ Cap) RAPID/T10-E</strong></h3>
<p>The pipe bending machines RAPID T10 with sliding top plate and constant reading lower plate cold-bend gas and water pipes, without welding, UNI EN10255 (BS1387- UNI3824).</p>
<p><strong>Supplied forms:</strong></p>
<p>&nbsp;2",2 1/2", 3", 4",5"&amp;6".</p>
<p>metalworking machines</p>


OMCN Hydraulic Pipe Bender HB-RAPID-T10-G6

Omcn 2" - 6" Hydraulic Pipe Bender C/W 6 Formers (italy)

omcn 2" 6" hydraulic pipe bender c/w formers (italy) penyok pipa hidrolik pembentuk (italia) machines mesin lainnya paip hidraulik lain-lain 液压弯管机 成型机（意大利） 其他机器

omcn-2-6-hydraulic-pipe-bender-c-w-6-formers-italy

Omcn 20 Ton Bottle Jack BJ-ART129

omcn 20 ton bottle jack bj-art129 botol hydraulic tools alat hidrolik bicu tan peralatan hidraulik 吨瓶千斤顶

omcn-20-ton-bottle-jack-bj-art129

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Manual Press Art.155</strong></h3><h3 class="md-block-header-three">Technical Data :</h3><ul class="md-block-unordered-list-item"><li>Model : Art.155     </li><li>Capacity : 15 ton   </li><li>Piston stroke : 190 mm   </li><li>Weight : 130 kg </li></ul>

<h3><strong>OMCN Manual Press Art.155</strong></h3>
<h3>Technical Data :</h3>
<ul>
<li>Model : Art.155&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>Capacity : 15 ton&nbsp;&nbsp;&nbsp;</li>
<li>Piston stroke : 190 mm&nbsp;&nbsp;&nbsp;</li>
<li>Weight : 130 kg&nbsp;</li>
</ul>


OMCN Manual Press Art.155

Omcn Manual Press Art.155

omcn manual press art.155 tekan machines mesin lainnya akhbar lain-lain 欧姆龙手册出版社art.155 其他机器

omcn-manual-press-art-155

Omcn 5 Ton Bottle Jack BJ-ART126

omcn ton bottle jack bj-art126 botol hydraulic tools alat hidrolik bicu tan peralatan hidraulik 吨瓶千斤顶

omcn-5-ton-bottle-jack-bj-art126

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Hydraulic Trolley Jack Art.3020</strong></h3><h3 class="md-block-header-three">Features : </h3><ul class="md-block-unordered-list-item"><li>Completely innovative design.</li><li>Very low profile.</li><li>Ergonomic handle.</li><li>Support holder with a wide base.</li><li>Rubber-covered support.</li></ul><h3 class="md-block-header-three">Technical Data : </h3><ul class="md-block-unordered-list-item"><li>Model: Art.3020</li><li>Equipped with foot-approaching control</li><li>Hand descent-control</li><li>Rubber covered support</li><li>Nylon wheels</li></ul>

<h3><strong>OMCN Hydraulic Trolley Jack Art.3020</strong></h3>
<h3>Features :&nbsp;</h3>
<ul>
<li>Completely innovative design.</li>
<li>Very low profile.</li>
<li>Ergonomic handle.</li>
<li>Support holder with a wide base.</li>
<li>Rubber-covered support.</li>
</ul>
<h3>Technical Data :&nbsp;</h3>
<ul>
<li>Model: Art.3020</li>
<li>Equipped with foot-approaching control</li>
<li>Hand descent-control</li>
<li>Rubber covered support</li>
<li>Nylon wheels</li>
</ul>


Omcn 3 Ton Hydraulic Garage Trolley Jack ( Low Profile: 90MM Closed Height ) ART3020

omcn ton hydraulic garage trolley jack low profile: 90mm closed height art3020 (profil rendah: tinggi tertutup 90mm) jacks dongkrak hidrolik tan hidraulik troli garaj profil bicu hydraulik 吨液压车库手推车千斤顶（薄型：90mm 闭合高度）art3020 液压千斤顶

omcn-3-ton-hydraulic-garage-trolley-jack-low-profile-90mm-closed-height-art3020

• Compact and sturdy structure fully made  of welded steel.

 • Shafts made of specially treated and  chromium-plated steel. 

• Spring made of steel inside the cylinder  for a rapid return of the shaft. 

• Two-speed manual pump: fast when  approaching and precise when working. • Knob on the pump to control both speeds

. • Winch to raise easily and quickly the  workbench. • Supplied with a large diameter manomete 

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Manual Press Art.155</strong></h3><h3 class="md-block-header-three"> Technical and structural lay-out </h3><ul class="md-block-unordered-list-item"><li> Technical and structural lay-out    </li><li>• Compact and sturdy structure fully made  of welded steel.</li><li> • Shafts made of specially treated and  chromium-plated steel. </li><li>• Spring made of steel inside the cylinder  for a rapid return of the shaft. </li><li>• Two-speed manual pump: fast when  approaching and precise when working. • Knob on the pump to control both speeds</li><li>. • Winch to raise easily and quickly the  workbench. • Supplied with a large diameter manomete </li></ul><h3 class="md-block-header-three">Technical Data :</h3><ul class="md-block-unordered-list-item"><li>Model : Art.158</li><li>Capacity : 20 ton   </li><li>Weight : 455 kg </li></ul>

<h3><strong>OMCN Manual Press Art.155</strong></h3>
<h3>&nbsp;Technical and structural lay-out&nbsp;</h3>
<ul>
<li>&nbsp;Technical and structural lay-out&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>• Compact and sturdy structure fully made  of welded steel.</li>
<li>&nbsp;• Shafts made of specially treated and  chromium-plated steel.&nbsp;</li>
<li>• Spring made of steel inside the cylinder  for a rapid return of the shaft.&nbsp;</li>
<li>• Two-speed manual pump: fast when  approaching and precise when working. • Knob on the pump to control both speeds</li>
<li>. • Winch to raise easily and quickly the  workbench. • Supplied with a large diameter manomete&nbsp;</li>
</ul>
<h3>Technical Data :</h3>
<ul>
<li>Model : Art.158</li>
<li>Capacity : 20 ton&nbsp;&nbsp;&nbsp;</li>
<li>Weight : 455 kg&nbsp;</li>
</ul>


Omcn Hydraulic Presse ART158

omcn hydraulic presse art158 mesin hidrolik machines lainnya lain-lain omcn液压机art158 其他机器

omcn-hydraulic-presse-art158

• Shaft of the cylinder made of treated  and chromium-plated special steel. 

• Motorized 2-speeds control unit with  automatic insertion.

• Operated by lever distributor and button  on the control box to be activated  simultaneously. 

• Protection rear and side panels made  of zinc-plated steel. 

• Calibrating valve to control the power  according to the work you have to do. 

• Maximum versatility thanks to the  height-adjustable table. 

• Winch to raise workbench  (P30/MR – 161/R – 162/R – 163/R – 164/R). 

• Shaft to raise workbench  (164/RS – 204/R – 204/RE). 

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Manual Press Art.155</strong></h3><h3 class="md-block-header-three"> Technical and structural lay-out </h3><ul class="md-block-unordered-list-item"><li>• Shaft of the cylinder made of treated  and chromium-plated special steel. </li><li>• Motorized 2-speeds control unit with  automatic insertion.</li><li>• Operated by lever distributor and button  on the control box to be activated  simultaneously. </li><li>• Protection rear and side panels made  of zinc-plated steel. </li><li>• Calibrating valve to control the power  according to the work you have to do. </li><li>• Maximum versatility thanks to the  height-adjustable table. </li><li>• Winch to raise workbench  (P30/MR – 161/R – 162/R – 163/R – 164/R). </li><li>• Shaft to raise workbench  (164/RS – 204/R – 204/RE). </li><li>• Supplied with standard manometer </li></ul><h3 class="md-block-header-three">Technical Data :</h3><ul class="md-block-unordered-list-item"><li>Model : Art.156MR</li><li>Capacity : 20 ton   </li><li>Weight : 208 kg </li></ul>

<h3><strong>OMCN Manual Press Art.155</strong></h3>
<h3>&nbsp;Technical and structural lay-out&nbsp;</h3>
<ul>
<li>• Shaft of the cylinder made of treated  and chromium-plated special steel.&nbsp;</li>
<li>• Motorized 2-speeds control unit with  automatic insertion.</li>
<li>• Operated by lever distributor and button  on the control box to be activated  simultaneously.&nbsp;</li>
<li>• Protection rear and side panels made  of zinc-plated steel.&nbsp;</li>
<li>• Calibrating valve to control the power  according to the work you have to do.&nbsp;</li>
<li>• Maximum versatility thanks to the  height-adjustable table.&nbsp;</li>
<li>• Winch to raise workbench  (P30/MR – 161/R – 162/R – 163/R – 164/R).&nbsp;</li>
<li>• Shaft to raise workbench  (164/RS – 204/R – 204/RE).&nbsp;</li>
<li>• Supplied with standard manometer&nbsp;</li>
</ul>
<h3>Technical Data :</h3>
<ul>
<li>Model : Art.156MR</li>
<li>Capacity : 20 ton&nbsp;&nbsp;&nbsp;</li>
<li>Weight : 208 kg&nbsp;</li>
</ul>


SPECIFICATION

Omcn Hydraulic Presse ART156MR

omcn hydraulic presse art156mr mesin hidrolik machines lainnya lain-lain omcn液压机art156mr 其他机器

omcn-hydraulic-presse-art156mr

Shaft of the cylinder made of treated  and chromium-plated special steel. 

Motorized 2-speeds control unit with  automatic insertion. 

Operated by lever distributor and button  on the control box to be activated  simultaneously. 

Protection rear and side panels made  of zinc-plated steel. 

Calibrating valve to control the power  according to the work you have to do. 

Maximum versatility thanks to the  height-adjustable table. 

Winch to raise workbench  (P30/MR – 161/R – 162/R – 163/R – 164/R). • Shaft to raise workbench  (164/RS – 204/R – 204/RE). 

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Manual Press ART164R</strong></h3><h3 class="md-block-header-three">Technical and structural lay-out  </h3><ul class="md-block-unordered-list-item"><li>Shaft of the cylinder made of treated  and chromium-plated special steel. </li><li>Motorized 2-speeds control unit with  automatic insertion. </li><li>Operated by lever distributor and button  on the control box to be activated  simultaneously. </li><li>Protection rear and side panels made  of zinc-plated steel. </li><li>Calibrating valve to control the power  according to the work you have to do. </li><li>Maximum versatility thanks to the  height-adjustable table. </li><li>Winch to raise workbench  (P30/MR – 161/R – 162/R – 163/R – 164/R). • Shaft to raise workbench  (164/RS – 204/R – 204/RE). </li><li>Supplied with standard manometer. </li></ul><h3 class="md-block-header-three">Technical Data :</h3><ul class="md-block-unordered-list-item"><li>Model : HP-ART164R</li><li>Capacity : 100 ton   </li><li>Weight : 1100 kg </li></ul>

<h3><strong>OMCN Manual Press ART164R</strong></h3>
<h3>Technical and structural lay-out&nbsp;&nbsp;</h3>
<ul>
<li>Shaft of the cylinder made of treated  and chromium-plated special steel.&nbsp;</li>
<li>Motorized 2-speeds control unit with  automatic insertion.&nbsp;</li>
<li>Operated by lever distributor and button  on the control box to be activated  simultaneously.&nbsp;</li>
<li>Protection rear and side panels made  of zinc-plated steel.&nbsp;</li>
<li>Calibrating valve to control the power  according to the work you have to do.&nbsp;</li>
<li>Maximum versatility thanks to the  height-adjustable table.&nbsp;</li>
<li>Winch to raise workbench  (P30/MR – 161/R – 162/R – 163/R – 164/R). • Shaft to raise workbench  (164/RS – 204/R – 204/RE).&nbsp;</li>
<li>Supplied with standard manometer.&nbsp;</li>
</ul>
<h3>Technical Data :</h3>
<ul>
<li>Model : HP-ART164R</li>
<li>Capacity : 100 ton&nbsp;&nbsp;&nbsp;</li>
<li>Weight : 1100 kg&nbsp;</li>
</ul>


Omcn Hydraulic Presse ART164R

omcn hydraulic presse art164r mesin hidrolik machines lainnya lain-lain omcn液压机art164r 其他机器

omcn-hydraulic-presse-art164r

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Manual Press Art.153</strong></h3><h3 class="md-block-header-three">Technical Data :</h3><ul class="md-block-unordered-list-item"><li>Model : Art.153     </li><li>Capacity : 10 ton   </li><li>Piston stroke : 190 mm   </li><li>Weight : 104 kg </li></ul>

<h3><strong>OMCN Manual Press Art.153</strong></h3>
<h3>Technical Data :</h3>
<ul>
<li>Model : Art.153&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>Capacity : 10 ton&nbsp;&nbsp;&nbsp;</li>
<li>Piston stroke : 190 mm&nbsp;&nbsp;&nbsp;</li>
<li>Weight : 104 kg&nbsp;</li>
</ul>


OMCN Manual Press Art.153

Omcn Manual Press Art.153

omcn manual press art.153 tekan machines mesin lainnya akhbar lain-lain 欧姆龙手册出版社art.153 其他机器

omcn-manual-press-art-153

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Hydraulic Trolley Jack Art.3000</strong></h3><h3 class="md-block-header-three">Features : </h3><ul class="md-block-unordered-list-item"><li>Completely innovative design.</li><li>Very low profile.</li><li>Ergonomic handle.</li><li>Support holder with wide base.</li><li>Rubber covered support.</li></ul><h3 class="md-block-header-three">Technical Data : </h3><ul class="md-block-unordered-list-item"><li>Model : Art.3000   </li><li>Nylon wheels</li><li>Hand descent-control</li></ul>

<h3><strong>OMCN Hydraulic Trolley Jack Art.3000</strong></h3>
<h3>Features :&nbsp;</h3>
<ul>
<li>Completely innovative design.</li>
<li>Very low profile.</li>
<li>Ergonomic handle.</li>
<li>Support holder with wide base.</li>
<li>Rubber covered support.</li>
</ul>
<h3>Technical Data :&nbsp;</h3>
<ul>
<li>Model : Art.3000&nbsp;&nbsp;&nbsp;</li>
<li>Nylon wheels</li>
<li>Hand descent-control</li>
</ul>


OMCN Hydraulic Trolley Jack Art.3000

Omcn Hydraulic Trolley Jack Art.3000

omcn hydraulic trolley jack art.3000 hidrolik jacks dongkrak bicu hydraulik 欧姆龙液压手推车千斤顶art.3000 液压千斤顶

omcn-hydraulic-trolley-jack-art-3000

Dimension : 150 × 70 × 85cm (L × W × H)  

<h3 class="md-block-header-three"><strong class="md-inline-bold">OMCN Work Tables &amp; Tool Panels WB 1002</strong></h3><h3 class="md-block-header-three">Technical Data :</h3><ul class="md-block-unordered-list-item"><li>Capacity : 600kg </li><li>Number of drawers : 2 (lockable) </li><li>Dimension : 150 × 70 × 85cm (L × W × H)  </li></ul>

<h3><strong>OMCN Work Tables &amp; Tool Panels WB 1002</strong></h3>
<h3>Technical Data :</h3>
<ul>
<li>Capacity : 600kg&nbsp;</li>
<li>Number of drawers : 2 (lockable)&nbsp;</li>
<li>Dimension : 150 × 70 × 85cm (L × W × H)&nbsp;&nbsp;</li>
</ul>
